do not use Iphone 4 as wifi access point

Similar Questions

• The Torch 9800's BlackBerry Smartphones Can be used as a mobile Wifi access point

  Hello

  I just got a Torch 9800 with a great data plan; Anyone know if the phone can be used as a hotspot Wifi for a PC?

  N ° the Torch 9800 can't be upgraded to OS 7.1, which is the oldest version of the OS with function Hotspot Wi - Fi.

  I hope that helps you.

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• I can not use iPhone 6s hotspot

  I can't use iPhone 6s via hotspot to access the internet

  I already install iTunes and my iTunes and the iPhone are the version lasted, but when I connect iPhone via wifi without success to connect or I try to connect via buletoot USB or failure, he cannot see the network connection

  Please help me how can I set up my iPhone for the hotspot to access the Internet

  Hello

  Follow the steps here to connect your iPhone to a Wi - Fi hotspot:

  To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

• can I use a laptop to set up a wifi access point?

  When I first received a laptop of opportunity in last December, a colleague tech at my night school mentioned that I didn't have to buy a 803,11 access point device to plug my switch, but I rather use a WiFi card on my computer to create my own access point. I told him I have such a card and put a little out of my mind.

  However, I have someone outside to spend the night at my place, and he needs to check his e-mail. Unfortunately, it seems that the RJ-45 socket on his laptop is broken, I have tried several cables and impossible to get a connection, including the cable to connect the computer I'm using now.

  Is it possible that I can use ICS on XP Pro (preferred) or Vista 32 bit Home Premium (really want to use it, I have never set the boot loader after the upgrade to XP on a separate partition, especially because XP has worked so much better) to set up enough connectivity for him to connect to the mail server?

  Should I Windows 7 or Vista to do this? I know how to do the reverse quite easily (share Wi-Fi on the Ethernet port), but I don't know how to set up the SSID and others. I would assume same WEP or WPA2 (Yes, I know how it is easy to crack, but it's better that transmitting passwords in clear text because it discourages occasional interception) would too, so it will accept a connection open, unencrypted. I'll just close access once it does.

  How could I go to set it up? I'm not spending money on software that is not free for one night, one-shot deal. Kiss, I just need a connection of bare bones for him. If its Ethernet port was working, I would leave him to plug my switch, but since it's not I need to create a gateway using what material I have on hand, and the only device with any kind of ability 803.11 is my own laptop.

  I know it's possible, I don't know if this is something only Linux, or a solution that requires 3rd party software.

  Yes, you can use ICS.  See http://practicallynetworked.com/sharing/xp_ics/

  I forgot to include this--> http://www.home-network-help.com/ad-hoc-wireless-network.html

  You will need to configure security manually from the properties of maps dialog box wireless (on both computers) and IIRC, you can use WEP in ad-hoc XP networks.

  Go to the correct place
  Right click on the wireless adapter icon and select Properties
  Click the wireless networks tab
  Click Add to create a configuration
  in the 'Association' tab, set the SSID, network authentication 'Open' and WEP data encryption.
  It's been so long that I made that I remember exactly, but I think you can use only the 10 digit Hex key.

• With Macs DO NOT use symbols in your wifi passwords!

  It's more of a discussion of assistance than a question. I was recently informed by a wifi from my internet provider technician not to use symbols in my wifi passwords where I connected my Mac products. He said, in his experience, that's never a good idea. Apple seems to have problems with the symbols.

  Feel free to weigh in with your experience. But I think he was right. My Mac, ipads and phones, including my Apple TV still fell the signal in my house and a condo I have elsewhere (different internet service providers). I had everything checked lines, computers even buy a new modem and all I had to do was change the darn passwords for those with symbols. Head a slap!

  Now, I feel is no longer the problem. Amazing little trick that everyone should know!

  What do you mean by symbols?

• Use E2000 as ONLY - wireless access point not as a router

  I would use my E2000 router as an only Wi - Fi access point. The unit will be connected to a unit of combo modem/router Verizon FiOS Actiontek I want to leave only the first and only router on my network. Can the E2000 cause its router functions disabled without DD - WRT or other third party firmware?

  Thank you!

  Yes, but you need to connect a cable between the router to the AP, here's how

  Editing cascading (connecting) a Linksys router to another router

• Can I use my Satellite P10 as Access Point?

  Satellite P10 wireless access point

  Please can someone help?
  I have a laptop wireless by Satellite P10, can anyone tell me is it possible to set up the laptop to share my Internet remotely even if its WiFi, so it can be picked up by my Sony PSP. Then my cell phone would act as a wireless internet access point.
  As I do not have a router, don t know if it is possible this way any ideas?
  Thank you Michael.

  Hi Michael

  Well, I m not sure if it of possible the Sony PSP to connect to the laptop and if it works, but I found several useful information how to create make it the network connection wireless home in Windows XP without a router. Please check this links.

  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx

  http://www.annoyances.org/exec/show/ics_xp.

  Good luck

  Good bye

• Subnet routed on the main gateway of the WiFi Access Point

  Hello people.

  I have the wireless router WAG200G. It sports a RJ-11 input and a four port RJ-45, while it is compatible 802.11 g.

  I need to use it as an Access Point, WiFi via DHCP clients accommodation in its own range (I fear not the 192.168.1.x default range). However, I need to give this subnet, access the internet via my main network which has another Beach, say 10.0.0.x, where the entry door is 10.0.0.2

  I tried the subnet routing WiFi to my front door, but apparently I'm missing something I ever managed :-)

  For those wishing to help could you please tell me through this page http://ui.linksys.com/files/WAG200G/1.00.09/Setup_routing.htm ?

  FYI, I got the Linksys in my network off main application everywhere (Linksys & PCs) static IP, nat and affecting encapsulation Bridged Mode only. That's how it worked, but for security reasons, I need to isolate this subnet WiFi.

  Any kind of help would be appreciated.

  If you used the WAG as point of access only with standard Linksys firmware, then you cannot use the DHCP server. The WAG will always assign its own IP address as the gateway via the DHCP server. The only option would be to use the DHCP relay function or set another DHCP server.

  As long as the WAG is connected through a LAN port to your existing network you connected side full LAN of the WAG in your network. You don't want to run any DHCP server on the WAG. Your main router provide DHCP service. If your wireless devices have trouble getting an IP address from your main router, which should be the first thing to solve...

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• Satellite P875 - 32L - is unable to reconnect to the last connected WIFI access point

  I have a problem to reconnect to the last connected WLAN provider, with my Satellite P875 32 L.
  WLAN is switched on and shows all the neighbors access points, but it fails to whoever I logged before the reboot, or before you go to the rescue of the list.

  I'm going in service options for WLAN, sometiimes up to 5 times, then it undermines meet usually.
  It's well annoying.

  I have had this with the other 30 satellite of P870 too, but something so this behavior have disappeared. So there must be a solution.

  Hello

  You're talking about your private Wlan at home?
  If you had the same problem using another laptop too, it could be possible that this isn't a problem with the network s laptop wireless card or Wlan configuration but with the WLan router.

  You should definitely reset/reboot the rooter.
  In addition, check the settings of the IP router and or mac address filtering.
  Change also the type of encryption and Wlan channel.

  You have to try different combination turn off just to test the WiFi encryption and check if the laptop would connect to the Wlan open correctly.
  But the Wlan encryption must always be defined in order to avoid improper use of the Wlan access point.

• Errror: The certificate chain was issued by an authority that is not approved. connecting to a wireless access point

  I can't understand the process of certificates, by connecting a pc wireless access point that is authenticated by the radius server, im keep having this error "the certificate chain was issued by an authority that is not approved." do I need to set a certificate on the pc?

  Hello

  1. What is the version of the operating system that you are using?

  2. What is the exact full error message?

  If you use Windows 7 follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/view-or-manage-your-certificates

  http://Windows.Microsoft.com/en-us/Windows7/certificates-frequently-asked-questions

  You can also contact your ISP for more information.

  Hope the above information is helpful.

• WCS does not display a heatmap of an access point.

  I have ver.5.2.110.0 WCS and 4 1131APs on WLC4402 ver.5.1.151.0. WCS shows heatmap for 3 APs, but does not show one that runs normally.

  If anyone has seen this problem and how can I solve it?

  Thank you very much.

  Yes, it's most likely the problem. We cannot pull a heatmap for one AP with another type of antenna.

  Go to the map with this AP on it and use the APs position in the menu dropdown. Click on the access point and in the left pane, you should be able to adjust the antenna type and save.

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2maps.html#wpmkr1126389

• Cannot connect my HP printer, WiFi access point

  Just moved to the town house. Receive internet through wi fi on my phone access point.

  Could not connect to my wireless HP5510 printer. Toshiba laptop.

  I tried everything I can think of. Help

  The link below will take you to a copy of the Manual printer. There instructions to connect to a wireless network. Check with the provider of the solution hotspot if and how a printer can be used with the hardware/software.

  This printer is connected to the Toshiba via a USB cable. HP does not provide this cable with the printer you will need to acquire a leave of a computer supply store or somesuch.

  Manual of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?product=5063582&LC=en&cc=us&DLC=en&JumpID=oc_r1002_usen_s-003_r0001&lang=en&cc=us

  Driver and Firmware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5063582

  Note that the new firmware is available for this printer. Download and install the firmware for the printer according to the instructions. Then, restart the computer and install the driver software. Follow the prompts on the screen. Do not connect the printer to the computer until directed to do so by the instructions.

• Launch of Lightroom 6 is not. error: "can't find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library.

  It says: "cannot find the access point of the procedure _crtCreateSymbolicLinkW in the MSVCR110.dll dynamic link library. What can I do? I have already uninstall and then reinstall the software...

  It is indeed a microsoft problem, check here:error "did not find the entry point _crtCreateSymbolicLinkW - Microsoft Community .