Can not boot from HDD after bios update [Z510]

Similar Questions

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Can't boot from USB in BIOS FRIEND

  Well, yesterday, I decided to move from Windows XP SP3 to Windows 7. I then downloaded a file ISO of Windows 7 from Digital River and made a bootable USB key with it using Windows 7 USB/DVD Download Tool. Then I put the USB in my old pc to boot from it. In this game with the boot from USB, I have the problem that I think is related with my version of the BIOS. Is AMI BIOS v2.53. If I go to Boot Device Priority it shows boot devices only 3 [link1] - my c: / drive, CD-DVD-ROM and floppy. When I go to the menu hard drives [Link2], it shows all my HARD drive and the 3rd disc is my USB bootable [link3]. And to expand my USB in the Boot Device Priority menu, I put it as the 1st player [link4]. Instead, I can't put my C: / drive as the Boot Device [link5] 2nd. And after I exit and save the changes, it will not boot from usb. It appears the error "a disk read error has occurred. Press Ctrl + Alt + Delete to restart» If I try to boot from another boot menu F8 [link6] button, it will also give me the same error. This problem could be linked with my BIOS version?  I don't know how to solve the problem.

  [link1] - http://savepic.ru/6494502.jpg

  [Link2] - http://savepic.ru/6551865.jpg

  [link3] - http://savepic.ru/6544697.jpg

  [link4] - http://savepic.ru/6524217.jpg

  [link5] - http://savepic.ru/6520121.jpg

  [link6] - http://savepic.ru/6510905.jpg

  Have you considered to start the Windows XP installation?

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• can not boot from the CD

  I have a Dimension 8300 running XP Pro and I am trying to reformat the hard drive and reinstall XP.  I can't boot from the CD.  At startup after F12 and selected to boot from the CD, the sytem always starts on the hard drive. I changed the BIOS boot sequence, but still no luck.  The works of CD to read and write, but no boot from the OS disk.  Once the system boots from the hard drive I can start the CD of the OS that gives me the ability to reinstall XP, but no option to reformat.  My top disc is a DVD-ROM and the second disc is a CD - R.  I tried to boot from both drives, but the machine continues to boot from the hard drive.  Any suggestions?

  
  

• System crash can not boot from CD/DVD-rom

  Tried to do a restore of widows to correct this problem with CD / DVD rom instead of fix player it now only will start and say 'services starting configuration' and then it will pop a windows 'X' in red saying install Windows - Windows could not complete installation. To install Windows on this computer, run the Setup again. I restart and it keeps reading more and more I bought acer accessories Acer store system recovery discs... but they are unusable because can't boot from the drive to cd/dvd rom please help thank you very much.

  http://www.YouTube.com/watch?v=H2xoMEPfiPQ&feature=player_embedded

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• Can not boot from CD/DVD on the Qosmio G25-av513

  Hi everyone, I can't get into my windows anymore and when I load the system, I get this error. It shows that I have an error ATA #0
  Intel Boot Agent GE v1.2.31
  Copyright (c) 1997-205. Intel Corporation

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert the diskette in the system in the driver.
  Press a key when read...

  I don't have the recovery CD anymore but I am trying to boot from the CD with a CD of Windows XP and I changed the priority to boot from CD first in the BIOS and it always displays this message... Help, please!

  Hello

  Enter the BIOS settings and set its default value. Then try to boot up your laptop and check what happens. Also try to boot from CD/DVD installations. If the problem continues, I'm afraid there is a hardware problem devices such as HDD and ODD are not visible to the BIOS settings.

  I assume it can be due to faulty hardware or faulty controller on the motherboard.

• Can not boot from my DVD to a format before loading Win 7

  I tried to start my (professional) win7 updated my dvd player, so I can format my C: drive before loading Win7.

  I did the necessary bios change for boot order, I get the message "press any key to boot...". ', but a touch usually takes me to my C: drive boot upward.

  I should mention that I installed win7 on my C: drive but was never an option to format the drive, and now there are still all my old files and the background image that I don't want. Otherwise, the installation went great.

  There is another thread where I was getting help and some good ideas, but he seems to have died.

  See Win7 XP update not did me not the ability to format the C: drive or delete all the old files on this drive on this link for further details.  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Win7-upgrade-from-XP-did-not-give-me-the-option-to/4ca764c3-2f45-4B2F-84b9-808ce96476c4

  Basically, what I want to know is, are SATA drives "to hot' I think the term is.

  In other words do I can unplug the SATA connection on my C: drive, see him if I can then boot in my reader DVD, then in case of success, taking the C: drive in and move forward with the formatting and reinstalling from there?

  Thank you

  You need the C: drive to the DVD player work. I tried this before. Your Windows 7 CD may be corrupted. I recommend you to speak with Microsoft by phone on this problem. Here is ther number (800) MICROSOFT (642-7676).

  Hope this helps!

  Sammy J. Of SammyShane Tech-Center Inc.

• Tecra S1-can not boot from original Windows XPP

  When I try to boot from a CD of SP1 XPP Windows original mine Tectra S1 gave the following message is displayed:

  Boot CD-ROM type: Non Emulation boot

  After message, press a key to continue, but I had many reading errors.

  I have the latest BIOS (2.5), no system of work.
  I tried many CDs XPP original Windows, but no one works.

  Can someone help me?

  Hi Digin

  Is this the same message when you use the restore CD?

• Satellite A200 - 19L can not boot from the CD

  Hi guys,.

  I'm glad I found this forum site, I pretty well hope to find a solution here.

  Well, this problem is not very complicated, in fact my DVD player (model TS-L632) is not read more, so much so I decided to change with a new one, but it is not the same model as the original drive.
  It is the case of the generic DVD player really.

  Now when I inserted my recovery disk or any bootable disk is not booting the CD, and when I press F12 for I can't find any CD/DVD drive, but running in Windows I can't find the DVD player and it can read any CD priority boot normally.

  Just having the problem while booting from CD.
  I thought that maybe there is no security for this model that locked some hardware.
  So please guys want to help me how to understand it,

  any help would be greatly appreciated.

  Thank you

  > When I press F12 for boot priority I can't find any CD/DVD drive, but running in Windows I can find the DVD player and it can normally read any CD.

  The whole story seems really strange to me
  If you access the BIOS, you can see the details of the CD/DVD drive? The drive is recognized properly?

  If not then I guess that the STRANGE inserted is not totally compatible due to different master/slave/c-salt settings.

  > but running in Windows I can find the DVD player and it can normally read any CD
  It s also strange to me so that the CD/DVD drive appears in Device Manager even if the CD/DVD drive Startup menu option does not appear.

  But first check the BIOS

• Can not boot from the disk of my Satellite C

  1st I have a problem

  Windows Boot Manager
  Windows has encountered a problem communicating with a device connected to your computer.

  File:------Boot\BCD
  Status: 0xc00000e9
  Info: An unexpected I / 0 error

  To resolve this problem, I tried to install the Windows 8-64 bit (definitions of factory programs) - with the correct Toshiba drives, but after installation, that it took place...

  "reboot and select proper boot device or Insert Boot Media in selected boot device and press a key."

  I changed the boot disk priority, but it is still this bug.

  What model of laptop do you have exactly?

  Have you changed anything in the BIOS?

  The error message mentioned (reboot and select proper boot device) appear if the laptop can not find a boot device.
  Go into the BIOS and check if the HARD drive is set as first boot device.

  In addition, you should check if the HARD drive appears on the first page of the BIOS with all the details of the unit (size of the HARD drive, name).
  I guess this question could appear due to a malfunction of the HARD drive.

• Can not boot from the CD to recover OS - Portege M200

  Hello

  I'm working on my Portege M200 friends that she bought used. Only, it came with an external USB CDROM drive and the laptop computer AC adapter. To make things better the HD is no longer recognized by the BIOS. I had a spare HD so I installed it and now the BIOS see the new HD, Yay!

  I also discovered that I could buy a replacement Toshiba system recovery CD, new Yay! But before I do that I wanted to make sure I could boot from the external CDROM drive. I plugged the CDROM drive and attempted to start on a spare windows xp CD. But it does not start on the CD. I made sure that the CD-rom drive has been first in the BIOS boot priority, but that doesn't seem to work.

  I read the other posts that mention the boot directly from the external CD-rom USB drive does not work and I have to boot to the CD-rom drive by plugging the CD-rom drive in a PCMCIA card. If I have to buy a PCMCIA card that has USB ports for connecting external USB CDROM drive in for I can boot from a CD?

  If there will be any brand/type of work? If this is not the case, what brand/type is known to work.
  Any advise will be greatly appreciated!

  BIOS of the portege recognise only a limited number of pcmcia-CD-disks

  in this thread you will find all the information you need:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=71179𑘋

  but your portege also boots most of the readers of usb_FDD; If you make a BACK-boot disk with the appropriate drivers for your CD-ROM usb drive you can use it without restrictions bios

  as you can read that this method will work only in a DOS environment, that is why it is absolutely necessary to format your hard drive to fat32, otherwise it will not be recognized