Can not connect with Root

Similar Questions

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• I can not connect with the windows Messenger

  I can not connect with the windows Messenger

  Hello

  In which case it's a server problem, you will get a better response in the Live Messenger forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live http://windowslivehelp.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  Hello

  Just sent you a personal message

  Let me know if you have any question.

• my windows vista computer keep saying the user profile cannot be loaded.and I can not connect with my password. And I need a floppy disc or usb flashdrive.please free help to change password

  I can not connect and it says failed to connect to the profile.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Vista 64 bit, can not connect with Moxilla Firefox

  CAN NOT connect to mozilla firefox after upgrade - Vista Help - no problems before the update (Internet Explorer works well-Labtop: wirelesss) not even old versions of Firefox work now
  -check the connections (not a proxy problem - wireless)
  -good firewall
  -tired of the other recommendations of the Firefox forum - ideas please!  Thnx

  http://support.Mozilla.com/en-us/KB/

  http://support.Mozilla.com/Tiki-view_forum.php?locale=en-us&forumid=1

  I'm sorry, but these are Forums are for Microsoft Products.

  And you say IE works.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Try posting your question in the Forum Vista programs at the address above, or ask again using Firefox.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not connect with the FTP using NAT server.

  Hey, people!

  One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

  with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

  A newspaper using, serial interface, I saw the server response to the connection request.

  Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

  not to see if nat has been done.

  Why?

  What's wrong?

  What can I do?

  To put this machine in another NET, 201.1.1.0 is so hard!

  Look, a router interface has ip 201.1.1.1.

  !

  interface FastEthernet0/0

  IP 201.1.1.1 255.255.255.0

  No cdp enable

  !

  interface FastEthernet0/1

  IP 200.2.2.2 255.255.255.0

  IP nat inside

  No cdp enable

  !

  interface Serial0/0

  Description INTERNET

  IP 100.100.100.30 255.255.255.252

  NAT outside IP

  No cdp enable

  !

  IP nat inside source static 200.2.2.222 201.1.1.222

  no ip address of the http server

  !

  Thanks in advance,

  Renato

  Hello Renato.

  also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

  access list 103 permit tcp a whole Workbench

  access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

  access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

  access list 103 permit tcp any any 0 65365 range journal

  access-list 103 allow udp everything any 0 65365 Beach

  access-list 103 permit icmp any any newspaper

  access-list 103 permit ip any any newspaper

  Also, try to remove the access list together and see if that makes a difference...

  Kind regards

  GP

• can not connect with the server.

  I can't connect to the internet. WI - FI connected and at full power. This just happened and it's never happened before.

  Hi, it seems that there is a problem with the connection between your router and the dsl modem. Make sure the pin of the Ethernet cable is plugged correctly in any LAN port available on DSL Modem and on the WLAN port in the Wifi router.

  Go to 192.168.0.1, run the installation/quick installation program from this interface and make sure that you preferred DNS address type 192.168.1.1 or default of the DSL Modem ip address if you know it's different.

  It is always a good thing to restart both the DSL/ADSL Modem wireless router periodically to refresh the system and you will face less problems like the one you face now. If both modems are enabled for quiet a long time, it can either be hanged or perhaps become hot to damaged. So reboot them once quiet often when not on duty.

  Mark as answer if it answers your Question. Mark as helpful if it helped you continuer.* *.

• BlackBerry Smartphones can not connect with BlackBerry servewr

  Today, for the first time, my Curve 9300 unable to connect with the e-mail server. I do not receive my mails and can not delete and enter setup new email accounts.

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should try remove and re-add your configurations for the relevant accounts. Otherwise, you should contact your mobile provider for formal support.

  Good luck!

• I usually use my account from Microsoft to connect, but with the new update that I can not connect with her

  After the new update on the login screen it asks a Skype name and password. I used to use my microsoft account to connect to Skype and therefor have no idea how to connect with this new interface. I tried every password I can think and even changed my password on behalf of microsoft and still can't connect.

  Have you tried the login with the Microsoft account option.

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop-with-my-micro...

• BlackBerry Smartphones can not connect with the Office

  Please help me to connect with my Desktop Manager I could before and when I open Device Manager he has my PIN for let me no, I'm connected. That is what it is

  Thanks for trying to help, but the link does not work, that being said I installed 4.7 desktop and reinstalled: smileyvery-happy 4.6 and I'm Golden.

• I can not connect with iCloud in the iPhone 4S.

  < image published personal information >

  Unfortunately once all accounts iCloud 3 were created on your device, you can not create more little matter what you do. You will need to re - use one of the accounts that you have already created or create your account on another iOS device or computer Mac.

• Problem with simple reader of fingerprints and pass - can not connect with either

  When I try to log on my laptop, I get an error with simple reader of fingerprints and pass code. The code is "the service user profile Service does not have the connection. Unable to load the user profile.

  I tried to restart. But does not help. Can U help?

  Hello

  Check out the links below...

  The user profile Service has no logon

  Or,

  Try the microsoft fixit

• Windows 7 can not connect with the HP printer

  I have a HP Officejet 6500 E709n and I am running Windows 7 Professional on my laptop.  Recently, the printer no longer works and needed an updated driver.  When updating the driver, you must uninstall the previous software.  Once completed uninstalling the new updated driver installation failed.  I get a fatal error message, and after 2 hours with HP support make advanced remote troubleshooting, we found that, whenever I try a new device/printer, Windows 7 is rejected and not allowing the connection indicating the device is not signed digitally.  The problem is the device is digitally signed, but Windows 7 is not recognizing.  How can I get Windows 7 to recognize and allow my printer to work again?  I have tried both add wireless printer and plug the USB cable without success.

  Hi Sheldon,

  What is the accurate and complete error code that you get?

  If you get the error fatal error occurred during installation, I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02455020&LC=en&DLC=en&cc=us#N3054

  I hope this helps. Let us know if you have other problems with Windows in the future.