Can not display the files in the folder of the CD - R disc after their burned to disc

Similar Questions

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Export the map sprite does not display the images as soon as their published.

  When I preview the files, all right, but then when I "export sheet Sprite" selected and post the file, the subsequent HTML code does not seem to load images by operating via Safari/Chrome etc. If I have her clear, it works correctly.

  Any idea what is the problem? And how can I solve this problem?

  Thank you

  Local HTML code is not supposed to work at all. When you test the movie in Flash Pro temporary server is set up, you can not run the files from the desktop.

  Now, if you do not see anything at all, my guess is that you're just using vectors, and perhaps in Javascript pure local is allowed. When do you be spritesheets, they are bitmaps and be subject to different security rules.

  So, put your files on a server and see if they work from there.

• I can not display the page numbers of my books

  I want to sort my books pdf by number of pages, but when I add this detail (Pages) in the folder the whole column is empty.

  How can I get page numbers to display?
  I tried the following far with the following results:
  1. the folder does not give me the ability to edit the details of the file when I right click on it so I can't enter the page numbers manually.
  2. when I right click and check the properties of the available tabs are general, sharing and customize.  Customize tab only allows me to change the folder icon.
  3 when I select the properties of one of the pdf books in the folder tabs only I get are general, Pdf, and resume and I am unable to add the page number, use one of these tabs as well.
  4. I downloaded 'Quick pdf tools' that allows me to be able to change the pdf information because I thought that the reason why the column is empty is because the PDF itself does not page number filled in, but by viewing the properties with this tool, I am able to see that the page numbers for all the pdf files are listed (and can not be changed) so I don't understand not why the column for pages shows blank in the windows folder.
  What I resorted to that adds the keywords column to the file and write the page numbers in this column because the information I enter in this field will appear in the windows folder column.  I have a number of books, and it's a little disheartening to think that I must do this for each book when the information is already there for example the page number.
  So, if anyone can let me know what I can do to make the Pages column displays the number of pages rather than remain just an empty column, I would be very grateful.

  See if the following help to view pages:

  1. in a folder, choose 'View' - 'choose details '.

  2. a dialog box "Choose details" will appear. From there, you will have many options, listed here in alphabetical order:

  * Title of the album
  * Artist
  * Attributes
  * Audio sampling rate
  * Audio sample size
  * Author
  * Flow
  * Camera model
  * Category
  * Channels
  * Comments
  * Company
  Author's rights
  * Date of access
  * Date of creation
  * Update
  * Date photograph
  * Description
  * Dimensions
  * Duration
  * Name of the episode
  * Version of the file
  * Type
  * Keywords
  * Name
  * Owner
  * Pages
  * Product name
  * Product version
  * Description of the program
  * Protected
  * Size
  * Status
  * Topic
  * Title
  Track number
  * Type
  * Year

  Naturally, some of these options do not make sense for all folders. But for those who have a sense, check the boxes next to the details you want to see.

  If you want to move an element upwards or downwards in the list (higher appear to the left in "Détails" view), click on the item in question and press the 'Move up' and 'down '.

  I hope this helps.

• Internet Explorer can not display the webpage___ * _ o let know me MeAlert

  I run Windows XP update PS3 and other more IE8. IE worked before update and now does not work but fire fox still works

  Hi mentpay

  Welcome to the Microsoft Answers Forum!

  I recommend the methods are:

  Method 1:

  Follow the steps listed in the link below:

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage": http://support.microsoft.com/kb/956196

  Method 2:

  Run Internet explorer with no Add - ons. If you have not installed add-ons - it may be installed by itself the malicious program. Many modules come from the Internet, and they usually require that you give your permission before they are installed on your computer. Some, however, may be installed without your knowledge. This can happen if the add-on was part of another program that you have installed. Some modules are installed with Microsoft Windows. Steps to temporarily disable modules

  i. Click Start

  II. all programs

  III. Select accessories

  IV. click on system tools

  v., and then select Internet Explorer(no add-ons)

  If the browser works very well after these steps, the module may be the cause of error.

  Steps to determine which add-on may be the cause of the error

  i. open Internet explorer.

  II. click on tools, click on Manage Add-ons, and then click Enable or disable add-ons.

  III. in the list view, click Add-ons that have been used by Internet Explorer to display all add-ons.

  IV. Click to activate the Add-ons and then select Enable.

  c. Repeat step iv for each add-on to turn. When you are finished, click OK.

  Method 3:

  There is a difficulty to explore him to reset the Internet settings. Link below will help you with the same

  Reset Internet Explorer 8 settings: http://windowshelp.microsoft.com/Windows/en-gb/ff6cc789-e857-439d-a384-08bfa45354271033.mspx#E6D

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WANT TO UPDATE MICROSOFT - MET PROB - WINDOW CAN NOT DISPLAY THE PAGE, I'M LOOKING FOR--

  Update microsoft window-

  PorB met

  cannot display the p

  age, I'm looking

  http 404 error

  Hello

  1. are you referring to Windows Update?

  2. what version of Internet Explorer is installed on your computer?

  The Web page is not found (HTTP 404 error) If you are using Internet Explorer, this error message is due to if Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Note: If you are unable to access Windows update Web page, then I suggest you try the following steps.

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer.

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  § https://*.microsoft.com

  § https://download.windowsupdate.com

  § https://update.microsoft.com/windowsupdate

  § http://*.update.microsoft.com

  § https://*.update.microsoft.com

  § http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  Note: For "Internet Explorer cannot display the webpage" error I suggest you refer to the steps in the following Microsoft article.

  Internet Explorer cannot display this webpage: http://support.microsoft.com/kb/956196

  Notes:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Clean boot Once you have completed troubleshooting, re-enable all services to reset the computer as usual.

  System Restore When you restore the system to a previous state, any programs or updates that have been installed since that date will be removed.

  Keep us updated on the status of the issue.

• Computer can not display the name of the network to which it is connected.

  Hello, I'm able to get a stable access to the internet with my computer, but instead of display the name of the network, I am connected to (for reference, it is DGVB1), it says "Network 2" of what I have been able to deduce the Korean. This is why I can't connect to this computer in my homegroup?

  Clueless,

  Brian

  It was surprising, but I got the computer change the name of "Network 2" to "DGVB1," my SSID, which, for some reason, let it be detected and therefore be welcomed into the group. Weird, but at least it worked. The next issue, I'll try and work on East printers, which I believe that Norton 360 can be bothered to. in any case, thanks for the help :DD

• HELP blackBerry Smartphones ~ can not display the menu in the list of messages

  I don't know what happened, but while in a list of messages, I can't see the menu when I press the menu key. I can not open emails or texts either. The watch hourglass but I never get to see the text on the next screen. It seems that something is locked but I can't find the "secret code" to unlock it, ha, ha.

  I hope that someone else may have had this problem and can help me to fix it.

  Thank you very much!

  Have you tried resetting the device? Remove the battery when the device is turned on... and then check the issue.

• Media Player 11 plays a video streaming to left side but can not display the overview

  I have Windows XP and have Windows Media Player 11 for quite awhile with no problems at all. Suddenly, my player goes immediately to the toolbar on the left tray low down. He reads the stream or the video, I can hear it but I can't optimize the image using the right click.  I deleted my 11 Windows and re-installed but nothing... Could you help out me? Thanks to you all

  Hi Evantha,

  I'm sorry to hear that you are facing this problem with the computer. I will do my best to get the problem solved. However, before I'll have to ask troubleshooting questions.

  1. When was the last time that the player was working fine?

  2. How did you remove Windows Media player?

  3. are you aware of any recent software or the hardware in the computer changes?

  You can go through the article and check if it helps. Here is another article with more information about the player.

  You can also go through this article and check if it helps. If the problem persists you can Uninstall and then reinstall the drive and check.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help you.

• Can not run the Palm installation disc

  I want to turn off the Outlook synchronization and understand that I must restart the Palm installation disc to do this.  When I insert the installation disc in the drive, Notepad will open with the contents of the index.hta file is displayed.  If I use Explorer to navigate to the installation disc and double-click autorun.exe, the same thing happens.  If I insert the Palm installation disk on my laptop, it works fine.  I give up!  Any ideas appreciated.  Thank you.

  Now, you scared me!  I ran a full scan using Norton 360 (updated and current).  Fortunately, nothing was found.  Even though I know that proves nothing, I feel a little better just fixing the broken association.  I read the dougknox link, but I'm not thrilled at the idea of playing with the registry directly, so I found another way.  I have Goggled "Microsoft (R) HTML-based Application" and found that the file of the application is called "mshta.exe.  Then, I searched for "mshta.exe" Explorer and found that it is in c:\windows\system32.  Finally, I used Windows Explorer/Tools/Folder Options/File Types to access mshta.exe and it associates to the HTA file type.  It works!  Thanks a lot for your help!

  Message relates to: Palm TX

• Can not recover the Windows 7 desktop after replacing the hard drive

  I bought a new HP Pavillion Elite (HPE-240f) in August 2010. A week ago my hard drive has no SMART short self-test during systematic hardware diagnostics. I installed a new hard drive of the same size - 1 TB and could never make it work properly. I tried the following (in that order).

  1. using a system repair disc, I got the system from a previous image (which I did shortly after the purchase, install my own software and configuration of all). It worked, but then I noticed that Windows Update was not working. I ran various Microsoft diagnostic tools and discovered that some (unspecified) system files have been damaged or missing. All the fixes I tried didn't work. I ran hardware diagnostics extended, but no problem not found.

  2. I tried to restore the system to the default settings by using the original image on the D partition. At first it seemed to work, but at the last moment when the system started, I saw a message on the screen that Setup is starting services and then got a warning saying that services failed because of (unspecified) problems with hardware.

  3. I tried to restore the system from the system recovery discs and a message "system recovery disks do not support this computer."

  4. I found this Cyberlink utility on the HP website, dealing with precisely this issue. I created a CD tried and it didn't work.

  5. I found this document on the HP Web site, saying that if you are replacing a hard drive with sectors of 512 bytes with a new advanced Format (AF) drive (with areas of 4 096 bytes) and your system was manufactured before October 2010 (as mine was), you must get the new HP recovery disks. I thought I finally found the root of my problems (since the new drive is indeed AF and the old man is not) and ordered HP recovery discs.

  6. the disks arrived today, and I noticed that the version number of the software (for Windows 7 version) is almost the same as on the computer, except that the last digit is 9 on disks and 6 on the computer - I guess it's an update to deal with the problem hard drive AF. However, I get 'system recovery disks do not support this computer' error, if I use the utility from CyberLink recovery disks or not. To be on the safe side, I even used a new hard disc (new 1 TB) right out of the box (never partioned and installed previously) and connected the original keyboard supplied with the computer (I also unplugged everything except the monitor, keyboard and mouse). However, I get the same message. Just out of curiosity I tried to put back the original hard drive (certainly not in best shape, even if the system always starts with him) and still could not recover the system.

  What else can I try?

  Any help will be greatly appreciated.

  An alternative to try. > If you can read the Microsoft Windows 7 of 25-character license key attached to the Tower, you can download a Windows 7 ISO file to burn to a DVD. The version must match that on the sticker COST Microsoft. for example Home Premium

   

• Can not get the updates of Windows after crash, also need service pack 3

  Original title - service pack 3

  Computer crashed and can't seem to the windows update page to download updates. It seems that I need service pack or packs to do this, but can not get to any place for that in addition to devopler or it version that does not work. Someone at - it help him?

  SP3 for XP can be ordered on CD.

  http://support.Microsoft.com/kb/322389#Method2

  or downloaded

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  I suspect that you've already tried this source.

  Tom Ferguson

• Database trigger can not see the package global variable after assign in my form

  Hello

  I faced the problem with the trigger and the package variable global using the form designer

  first of all, I get the local IP address machine using WEBUTIL in triggering of the PREFORM and initialize my global package variable by ' Client_Info_Pkg.Set_IP_Address (WEBUTIL_CLIENTINFO.» GET_IP_ADDRESS); ", then I tried to make the DML operation in my form and at the same time I trigger database also uses the package global variable of" Client_Info_Pkg.Gand_IP_Address; "to read in the package, and then insert it into the audit table

  
  

  The question this database trigger may not feel the initialization "Client_Info_Pkg.Set_IP_Address (WEBUTIL_CLIENTINFO. GET_IP_ADDRESS)' I did in triggering of the PREFORM and I used to wonder if oracle create new session to run this trigger so he can't see my boot or what?!. .

  the package

  CREATE OR REPLACE PACKAGE Client_Info_Pkg

  Global_IP_Address VARCHAR2 (100);

  FUNCTION Get_IP_Address RETURN VARCHAR2;

  PROCEDURE Set_IP_Address (p_Machine_Name IN VARCHAR2);

  END Client_Info_Pkg;

  /

  CREATE OR REPLACE PACKAGE BODY Client_Info_Pkg

  FUNCTION Get_IP_Address RETURN VARCHAR2 IS

  BEGIN

  RETURN Global_IP_Address;

  END;

  PROCEDURE Set_IP_Address (p_IP_Address IN VARCHAR2) IS

  BEGIN

  Global_IP_Address: = p_IP_Address;

  END;

  END Client_Info_Pk

  relaxation

  --------------

  CREATE OR REPLACE TRIGGER RUNERP.FO_DOC_TYPES_L_T

  BEFORE INSERT OR UPDATE OR DELETE ON FO_DOC_TYPES

  REFERRING AGAIN AS NINE OLD AND OLD

  FOR EACH LINE

  BEGIN

  IF THE INSERTION

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("I",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address' HELP: NEW.) DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  IF THE UPDATE CAN

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("U",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address) "USING: NEW." DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  IF REMOVE THEN

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("D",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address) "USING: NEW." DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  END;

  /

  Thanks in advance

  I solved my problem by using the CONTEXT object, Michael thank you for your interest.