Internet Explorer can not display the webpage___ * _ o let know me MeAlert

Similar Questions

• Wireless is connected but internet explore does not display the Web page and redirects me here.

  My laptop has been connect wireless to my own private network and public networks such as McDonald's, Panerra, etc... Now, I get a message that says internet explore cannot display the Web page, but my computer says it is connected to the internet and my wireless connection is excellent.  I also tried to connect with Mozilla firefox with the same results.  The error from the Explorer head here to get answers, please help.

  Hello

  This line, Autoconfiguration IP address...: 169.254.82.78

  This means that the card can not be set with a valid IP address, and Windows assign a null default IP.

  Maybe this can help.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• Error "Internet explorer can not open this file or this page.

  __2-so I'm working, suddenly the following problem crosses my path. Told me that "Internet explorer can not open this file or this page. I followed the instructions but nothing happens so I leave and continue on another topic.

  1. when I see "your password is wrong", I'm always sure that this is right PW, so I click OK and it's immediately back 2 or 3 times until I close it and after that I continue to work as if nothing had happened.

  2 - while I'm working I tells me that "knowledge cannot open this page or IIR. I followed the Instructions but nothing happens. So I leave and continue my work on another of the subjects.

  "So I leave and continue my work on other topics.

  You don't say exactly what you are working on.

  Thus, the advice given is for Internet Explorer.

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·    You experience performance issues in Internet Explorer.

  ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·    Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also try the Forum from IE:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon

  Mick Murphy - Microsoft partner

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Why Internet Explorer does not display an outline around the hot spot, I just clicked on that?

  Hi all

  Why Internet Explorer display a contour around the area hotspot, I just clicked on? what should I do to resolve this?

  can anyone help Please

  gman

  Hello

  They said, it works with hotspots also. I have would not otherwise be sent.

  Hans G.

• WANT TO UPDATE MICROSOFT - MET PROB - WINDOW CAN NOT DISPLAY THE PAGE, I'M LOOKING FOR--

  Update microsoft window-

  PorB met

  cannot display the p

  age, I'm looking

  http 404 error

  Hello

  1. are you referring to Windows Update?

  2. what version of Internet Explorer is installed on your computer?

  The Web page is not found (HTTP 404 error) If you are using Internet Explorer, this error message is due to if Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Note: If you are unable to access Windows update Web page, then I suggest you try the following steps.

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer.

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  § https://*.microsoft.com

  § https://download.windowsupdate.com

  § https://update.microsoft.com/windowsupdate

  § http://*.update.microsoft.com

  § https://*.update.microsoft.com

  § http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  Note: For "Internet Explorer cannot display the webpage" error I suggest you refer to the steps in the following Microsoft article.

  Internet Explorer cannot display this webpage: http://support.microsoft.com/kb/956196

  Notes:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Clean boot Once you have completed troubleshooting, re-enable all services to reset the computer as usual.

  System Restore When you restore the system to a previous state, any programs or updates that have been installed since that date will be removed.

  Keep us updated on the status of the issue.

• Windows Explorer does not display the ogg metadata

  I ripped my CD to OGG (Vorbis) files and the appropriate metadata are included with them (or at least appear in Winamp and iTunes).

  But in Windows Explorer, when I look at a list detailed files, the news of the album/artist/etc do not show, the fields are all empty. When right-clicking on the file and selecting 'Properties', it only shows the details of the file (such as the path of folder, update) but has no field at all (not even empty fields) for info related to music.

  How can I get these similar areas such as ID3v2 tags for MP3 files, to display OGG Vorbis files?

  Thank you.

  Hi Suzuki650,
   
  Unfortunately, he has no such functionality present in windows to display the ogg metadata, you must have any third-party program to make this option on your computer, to do that you need to use your favorite search engine and search the Internet for the third-party program that integrates this feature.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Internet Explorer will not access the web and my antivirus will not work. I have updated to ie 9 and ran the software programs software and spyware malware. My machine is running on vista.

  I have Norton AntiVirus by Comcast and it does not start because of a "connection problem". The only thing I could find wrong was the question would not access the web. I deleted a user account, a couple of days, but do not know if that would do anything.

  Hi IrishStew,

  You can see the article in order to analyze the logs of System File Checker.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

  Since Internet Explorer works fine with mode safe mode with networking, you can perform the clean boot to see if a third-party service is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

• I can not display the page numbers of my books

  I want to sort my books pdf by number of pages, but when I add this detail (Pages) in the folder the whole column is empty.

  How can I get page numbers to display?
  I tried the following far with the following results:
  1. the folder does not give me the ability to edit the details of the file when I right click on it so I can't enter the page numbers manually.
  2. when I right click and check the properties of the available tabs are general, sharing and customize.  Customize tab only allows me to change the folder icon.
  3 when I select the properties of one of the pdf books in the folder tabs only I get are general, Pdf, and resume and I am unable to add the page number, use one of these tabs as well.
  4. I downloaded 'Quick pdf tools' that allows me to be able to change the pdf information because I thought that the reason why the column is empty is because the PDF itself does not page number filled in, but by viewing the properties with this tool, I am able to see that the page numbers for all the pdf files are listed (and can not be changed) so I don't understand not why the column for pages shows blank in the windows folder.
  What I resorted to that adds the keywords column to the file and write the page numbers in this column because the information I enter in this field will appear in the windows folder column.  I have a number of books, and it's a little disheartening to think that I must do this for each book when the information is already there for example the page number.
  So, if anyone can let me know what I can do to make the Pages column displays the number of pages rather than remain just an empty column, I would be very grateful.

  See if the following help to view pages:

  1. in a folder, choose 'View' - 'choose details '.

  2. a dialog box "Choose details" will appear. From there, you will have many options, listed here in alphabetical order:

  * Title of the album
  * Artist
  * Attributes
  * Audio sampling rate
  * Audio sample size
  * Author
  * Flow
  * Camera model
  * Category
  * Channels
  * Comments
  * Company
  Author's rights
  * Date of access
  * Date of creation
  * Update
  * Date photograph
  * Description
  * Dimensions
  * Duration
  * Name of the episode
  * Version of the file
  * Type
  * Keywords
  * Name
  * Owner
  * Pages
  * Product name
  * Product version
  * Description of the program
  * Protected
  * Size
  * Status
  * Topic
  * Title
  Track number
  * Type
  * Year

  Naturally, some of these options do not make sense for all folders. But for those who have a sense, check the boxes next to the details you want to see.

  If you want to move an element upwards or downwards in the list (higher appear to the left in "Détails" view), click on the item in question and press the 'Move up' and 'down '.

  I hope this helps.

• try to pay some bills and cannot access the Web page. I make each month and do not know how to correct it. does not that this program can not display the page's Web site

  happening only on a few sites of bill payment.

  Hello
  
  1. what internet browser do you use?
  2. If you are using Internet Explorer which version do you have installed?
   
  If you use Internet Explorer see the methods below.
   
  Method 1.
  I recommend you follow the steps listed in the article below and check.
  You cannot connect to or connect to Web sites in Internet Explorer secure
  http://support.Microsoft.com/kb/813444
  
  Method 2.
  If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
  Security zones: adding or removing websites
  http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not display the files in the folder of the CD - R disc after their burned to disc

  I'm burning a few recordings made House mp3 on a CD - R disc.  They seem to copy and burn on the disc OK, but if I take the CD in the drive and replace it back in the drive, I go in the folder of CD player and no files are displayed, but the properties show that disk space has been used.  How can I burn so that I can see and copy the files that I have archived? What (if any) I'm doing wrong?

  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  "Which CD or DVD format should I use?

  Burn music or pictures and use the disc in any computer, including versions of Windows prior to Windows XP, or ordinary readers CD or DVD which can read of the MP3s and digital pictures

  Drive: CD - R, DVD-R or DVD + R. Format: Mastered

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  Burn a CD or DVD

  Applies to all editions of Windows Vista. Which edition of Windows Vista do I use?

  If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

  NoteYou can use Windows to burn a data disc, which is useful for storing, archiving, and sharing files among different computers. If you want to make a disc that will play in a music or video player, you should burn the disc using a video program or music.

  View all

  See the toutMasquer all the

  Burn a disc by using the live file system format

  1. Insert a writable CD or DVD CD writer or DVD in your computer. 2. In the dialog box that appears, click burn files to data disc. 3. In the dialog box burn a disc , type a name for this disc, and then click Next. It can take several minutes for the drive to be formatted in the active file system format by default. When formatting is complete, an empty disc folder opens. 4. Open the folder that contains the files to burn and then drag the files into the empty disc folder.

  You can copy files to the disc folder by dragging them to the disc or to a folder to open disk icon

  When you drag files to the disc folder, they are automatically copied to the disk.

  Burn a disc using the ISO image format

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use? 1. Insert a writable CD or DVD CD writer or DVD in your computer. 2. In the dialog box that appears, click burn files to data disc. 3. In the dialog box burn a disc , type a name for this disc, and then click show formatting options. 4. Click on ISO image, and then click Next. An empty disc folder opens. 5. Open the folder that contains the files to burn and then drag the files into the empty disc folder. 6. In the toolbar, click burn to disc. The selected files are copied to the disk. When burning is complete, the drive tray opens and you can remove the drive. You can now use the disc in another computer or media. This type of disc has no need to be closed.

  To burn a disc to ISO image, you will need free space on your hard disk equal to the capacity of the disk. For a typical CD, it is approximately 650 megabytes (MB). If you select the files to burn but decide not to copy the files on disk, you can delete the temporary files to recover hard disk space. To remove the files, open the disc folder, select the files, and then, in the toolbar, click delete temporary files.

  

  See also
  • Disc burning: frequently asked questions
  • Erase a CD or DVD
  • Should which CD or DVD format I use?

  See you soon.

  Mick Murphy - Microsoft partner

• Computer can not display the name of the network to which it is connected.

  Hello, I'm able to get a stable access to the internet with my computer, but instead of display the name of the network, I am connected to (for reference, it is DGVB1), it says "Network 2" of what I have been able to deduce the Korean. This is why I can't connect to this computer in my homegroup?

  Clueless,

  Brian

  It was surprising, but I got the computer change the name of "Network 2" to "DGVB1," my SSID, which, for some reason, let it be detected and therefore be welcomed into the group. Weird, but at least it worked. The next issue, I'll try and work on East printers, which I believe that Norton 360 can be bothered to. in any case, thanks for the help :DD

• Windows Explorer does not display the file or files with fix = folder

  A few days ago I noticed that I have some files seemed not be included in the records, I have worked with. After some fiddling, I find that I can see all the files in a folder if 'fix' (at the top right of the display of the files) is set to "name". Usually the value by default in "folder" but whose value fix folder the subfolders and their content is invisible.

  With fix the name value, I moved some files to another folder and they turned upward correctly. But when I then moved this folder in the folder where I had taken the files and set fix it to the folder again the folder and its files have disappeared.

  I had recently downloaded both Dropbox and Google so I removed the and pulled out another who was supposed to repair/update drivers that I had a problem with many (e.g. printer) drivers disappear just before Christmas. Does not see how this can be related unless there is also a malware somewhere on my computer. I have Norton 360 update and run Windows Defender when he invites me.

  The only other recent change (after the loss of the pilot) was to download all the Windows updates current, even if not necessary.

  I am running Windows 7 64 bit. Windows is up to date.

  Right-click on the folder and click Properties,

  Is there a Unlock button on the general section?

  If not,

  Check the hidden box and click on apply.

  This will set all the folders and files as hidden.

  Now to clear the hidden check box, click on apply again.

  This will remove the attribute hidden folders and files,

  Finally click OK and apply and OK your way out.

  At worst, check with your user account permissions.