can not get my f drive to recognize a dvd or cd is inserted?

Similar Questions

• I can't get my hard drive to recognize that I have a CD in the tray

  I can't get my hard drive to recognize that I have a CD in the tray.  I can only open and view those that I already copied. Why?

  There are a number of possibilities here.

  1. assuming you have tried several different blank CD (if you are fairly confident that the problem is not the media), it is possible that the laser "burning" the recordable CD is dead. Because this isn't the same laser that reads the CD, you can always read but not write.  If this is the case, the only solution is to buy a new CD player (not expensive).

  2. your CD drive (E :) shows when you click on my computer?  I think it does, or you did that you can open and view copies of files, you have already copied to other CD.

  3. open Device Manager (start > run > devmgmt.msc > OK)

  • Expand the category of CD-ROM/DVD-ROM readers by clicking on the + sign to the left
  • Y at - it a warning next to the entrance icon?
  • Double-click the entry for your CD player
  1. That said under the "device status".
  2. What would you say (at the bottom) under "use of the device.
  • Close the Properties window and Device Manager

  4. open my computer, right-click on the icon for your CD drive and select Properties

  • Is there a tab "recording"?
  • If there is a 'Recording' tab, click on it.  Is the box to "Enable the writing of CD on this drive" checked or unchecked?  (Do not change at this stage)

  I'm not very familiar with Media Center Edition.  In the past, when you copy files to a CD, how did you do?  You just drag files to the letter of the CD-ROM drive in Windows Explorer, or did you have to open an app?  If the latter, what application you use to copy files to a CD.

• BlackBerry smartphones can not get the Desktop Manager to recognize the connection to the device

  I tried for days now to get the Desktop Manager to recognize a connection on my phone so that I can sync my Outlook contacts and calendar.  So far, I deleted and reinstalled the Manager several times.  I downloaded and installed the driver package.  I tried to do a battery pull before connecting the phone.

  Whenever I connect the phone Microsoft "new hardware found" Wizard opens and it recognizes the Blackberry device but it cannot complete the installation of the phone because apparently missing a driver.

  I love the phone, but it is useless for me until and unless I can sync it with Outlook.  Any suggestions?

  OK, I found and fixed the problem!  It had to do with the new Windows assistant material not being able to find the driver for the Blackberry device.  When I did the uninstall process part included saving the pilot atl.dll.  I assumed it was the driver that I needed to make things work.  I searched on the C: drive for the file, and when the new device Wizard came I pointed to the spot.  The Assistant began to load the driver.  He asked another file that is part of the Service Pack 2 of Windows and I searched and found this one as well and directed the Assistant for her.  It finishes loading and the device is connected.

  The problem at the end of the day was that the wizard could not find the driver that he needed, even if it is there all the time.

  Thank you for the help, it lead me to the solution I needed.

• Can not get the NEW drive to take apart no matter what I do. May have screwed everything up!

  If my hard drive has not then I put a new disc of HD. I got a return on my external seagate so I plugged and used the restore in the disc utilities. I just want to start over clear all and give it another go. I can't remove the new HD to save my life. Ive started from an external hard drive, but internal one said her always busy. Ive tried the force unmount terminal without result. Now, I have no idea where Im Now. Help, please...

  Did you format the new hard drive first? Table partition GUID and MAC OS extended (journaled).

  If you do not:

  Start with CMD + R and use DiskUtility.

  Then the restoration of the exterior.

• Can not get the graphics driver Intel HD to Satellite C50t-B-110

  Hello

  I'm trying to update my driver Intel HD Graphic on my C50t-B-110 Satellite. I can't the driver of the Intel driver update utility because it is a pilot costume, so I might need assistance in case there are the last you're looking for the right driver.

  The Intel driver will install fine, you just have to uninstall the existing driver first in the Panel.

• Laptop HP 15-g075nr: can not get the Qualcomm WIFI driver to install

  I went to the HP site, had the site determine my type of laptop, then downloaded the Qualcomm Atheros QCA9000 driver and installed.  After installation, Device Manager still listed under OTHER and when I say update the network device driver, it says that it cannot find a driver for the device.

  How can I get a device driver that I can use to get WiFi running?

  P.S. I have installed hundreds of device drivers, so I know not how, it is just the fact that one on your web site does not work with my laptop.

  P.S.S. The wifi computers worked with windows 8, but I reinstalled windows 7, 64 bit.

  Hello:

  That's why the Atheros driver does not work, and the parts list said even your model with the Atheros card, that's why I there no question.  In addition, also, I assume that you checked the model of wireless card that your laptop when running on W8.1.

  Here are links to the drivers you need...

  Wireless: the RTL8188EE wireless card does not come with bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_141169_1 & swEnvOid = 4058

  Card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7241980 & sw_lang =

• Can't get my floppy drive to save a disk error: disk is not rewritable.

  Original title: FLOPPY ERROR.

  I can't get my floppy drive to save on a disk, I get the error message saying disc one is not rewritable. I use it for embroidery

  how you're framing your question and the answer

  is a little hard to follow.

  is this correct: you have a machine that you insert a floppy disk in

  that you set up with data on a computer.

  the machine cannot write to the diskette or the computer cannot write

  on the floppy?

  or what?

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• I accidentally loaded a .iso file on my PC and can not get rid of it. When I try to delete the file it says that the file is opened by the system. Also the file created 3 virtual drives like E:, F: and G: __Please let me know how I can remove this .iso

  I accidentally loaded a .iso file on my PC and can not get rid of it.  When I try to delete the file it says that the file is opened by the system.  Also the file created 3 virtual drives like E:, F: and G:
  Please let me know how I can remove this .iso file.

  Try Safe Mode. Repeatedly press the F8 key as the computer starts getting the menu diagnosis. Use the arrow key to select Mode without failure. MS - MVP - Elephant Boy computers - don't panic!

• series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  Hi Louis,.

  What is the brand and model of your computer?

  You can visit the computer manufacturer and try to install the latest version of the Chipset drivers.

  Also try to use Windows Update to update the drivers and check if it helps.

  Automatically get recommended drivers and updates for your hardware

  You can also get in contact with the support of computer manufacturer for assistance.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have both the serial number

  I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have two serial numbers.  I can't find a number that strives to speak to a live person at Adobe.  I need to reduce the size of the pixel today on some photos and need the program.  Is there another way to reduce pixel if I can't get my Photoshop runs today?

  See the page linked below.  Your installation/serail number will not work.  You need to acquire a download for it with a specially assigned serial number...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• How can I get my 7 slate to recognize the usb keyboard?

  How can I get my 7 slate to recognize a little matter of keyboard that connects with a usb microphone and no bluetooth? This usb port is useless for what anyone but plugging in the charger? Thank you.

  The Slate7 is not able to connect to an external keyboard via USB.

  It works fine with Bluetooth keyboards.  I use a lot with my Slate7.

  The USB port is loading and connection to a computer for synchronization and file transfer.

  WyreNut

• I can work between my Mac and iPad, but can not get my iphone to receive transfers?

  I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers?  The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.

  Did you numbers is synchronization correctly via iCloud on your iPhone?  You could check that the connection of numbers to iCloud is turned on at two places:

  Settings > iCloud > iCloud Drive > numbers

  and,

  Settings > numbers > use iCloud

  SG

• Webcam is displayed in devices and printers, but can not get turned on?

  Original title: webcam 270
  Webcam is displayed in devices and printers, but can not get turned on?

  Hello

  ·         What operating system do you use?

  ·         You're using a built-in or external webcam?

  ·         What is the brand and model of the webcam?

  ·         Were there recent changes made on the computer before the show?

  Method 1:

  I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

   

  Method 2:

  Try to update the drivers for the webcam from the manufacturing site and check if it works:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Use the hardware and devices Troubleshooter to fix the problem.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 4:

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us