Can not get working my ericsson F3507g S10, also some problems wireless modem

Similar Questions

• can not get work network

  my main computer is Vista, my second computer running 7 pro, my laptop is running 7 home and my netbook running vista, I also have an xbox all hooked to a wireless router. the printer is on the primary computer. I can't get one of these devices to see each other. I bought but haven't installed upgrading to 7 pro for the main computer, but all my data on it and it still works fine. all others are new and really have nothing on them. I have improved in the hope that I could use any computer for my home business and if one died I would still be able to work. After that all windows 7 was to make simple right? is this possible or do I spend a thousand dollars in products microsoft for nothing.

  Hello Russ Conrad,

  You must start by creating a new group of residential on your Vista Machine and then join the homegroup on other computers.

  Check out this article which will help you create a new network on your Vista computer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Once you have created the network, try to join the host on your Windows 7 computer group and the other vista computer. This article should help you to do so.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  Then you can try sharing the printer you have connected to your Vista Machine of hand:

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  Get back to us if you have more questions about this.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not get working on new facility management network

  I'm trying to connect to my new installation ESXi 6 but I am having trouble.

  Background: Previously, I had 5.1 running on this computer. I use the same configuration of network that I was before. My 3 cards in the machine were 8111f Realtek and so initially, I couldn't install ESXi 6. I bought a Broadcom BCM5751 I think it is on the HCL, but I had a hard time to navigate that sometimes. ESXi 6 is installed with no problems, once this card was present.

  Problem: I can't ping my new ESXi installation. The network configuration has not changed since the previous server, just the physical network adapter is different. The ESXi server can ping its own IP and localhost. The router can ping its own IP (gateway). Or the other cannot ping. Is a static route that is defined in the (unchanged compared to the previous) router, and the router says that the link is active. Router is Mikrotik Routerboard RB2011UiAS-2HnD-po

  Network configuration:

  IP: 10.0.0.6

  Mask: 255.255.255.252 (30-bit)

  Gateway: 10.0.0.5

  IPv6: disabled

  All opinions are appreciated. I can provide more information if necessary.

  Just checked and the card NETWORK is on the HAL

  VMware Compatibility Guide: search for i/o device

  You can try this fix? http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2035701

  Does not specify v6 but worth it for the moment.

  Someone else seems to see the same question about 5.5 with this card:

  5.5 ESXi host is not able to connect to the network

  Rich

• Can not get working Lightroom CC (2015) - ask for help?

  Hello... I don't know if in place of wright, but I'll try...

  (The system is MacOS, Yosemite fully up-to-date)

  Lightroom (LR) for years referred to as my app photo favorite and paid version (updated to the last verses. 5.7).

  Beside that, joined to the solution of the subscription "creative cloud (verse.» 2.0.0.74), nov. 2014...

  Know that LR comes in verse. 6 I wanted to use the opportunity for "CreativeCloud", then downloaded and installed version...

  But from LR v.6 isn't every success... presentation on the screen flashes and the application appears in the Dock... then everything disappears again!?

  Always my pay LRversion installed... does function (thank God!)

  Earlier, had absolutely no problem with creative cloud, or PS CC...

  Yes what up Doc? Should I really buy the RL once again, or...?

  Have a very large number to make photos more in LR over the years, not really uninstall paid version if this should be a question...?

  Sincerely, Kim, Denmark.

  Have you tried logging in your CC desktop app, then logging put it back? Stop/restart won't work, but logging out and back in must.

• I can work between my Mac and iPad, but can not get my iphone to receive transfers?

  I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers?  The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.

  Did you numbers is synchronization correctly via iCloud on your iPhone?  You could check that the connection of numbers to iCloud is turned on at two places:

  Settings > iCloud > iCloud Drive > numbers

  and,

  Settings > numbers > use iCloud

  SG

• My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

  Original title: internet telephone

  My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

  Hello

  1. What is the brand and model of the phone and Bluetooth adapter?
  2. what exactly happens when you access the internet via your phone?

  Please provide more information. This will help us assist you better.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Also, please take a look at the below items that might help you.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• HP Photosmart series 7520 I can not get my fax to work at all

  I can not get my fax to work.  He always tells me that my phone connection may not be configured correctly.  I place the phone cord Jack #1 at the back of the printer and also connected the phone cord to the wall outlet.  I don't know what else to do.  But I'm losing too much time trying to get this working.

  I appreciate your advice and help. However, after checking, I found that the wall outlet is not working. Plugged into another connection and it worked fine.

  Thank you very much for your help.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Can not get debugging working

  Hello I'm here to ask another stupid question.

  I can run my code very well but can not get the debugging work. When I click on debug that code runs immediately but in flash builder it says launch ProjectName (percentage)

  and it takes quite awhile ~ 3-4 minutes and then I get the error message

  Unable to connect; session has expired.
  Ensure that:
  1. you compile your Flash application with debugging on.
  2. you run the debug version of Flash Player.

  any ideas?

  Hey chris,

  from the looks of it, two things can be wrong here. check your debug configurations and search two fields for the IP address and the IP address of host debug. Was that changes of IP address of your host (DHCP) and you need to update periodically in your flash builder settings. You can check your IP address using your command prompt and appropriate controls (ipconfig / ifconfig). Good luck!

• tiles of Windows 8 & shortcuts not working does not and can not get cmd prompt

  Currently have a friends laptop to look at as they were able to add a user. When I connected to my wifi I beieve an update has been installed and now tiles and shortcuts will not work and can not get command prompt.

  Win + R key comes box but cones with errorwhen all orders entered for example cmd msconfig etc.

  Have not all discs re - install - suggestions?

  CTRL-SHIFT-Escape is the direct shortcut for Task Manager.

  If you can't have the power button to enter safe mode, you can do it from the login screen.  Restart your computer, but do not connect.  The login screen, use the power icon and hold down SHIFT while you click on restart.  This will take you to the menu troubleshooting then you can try to refresh.

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• can not get my program works as I changed my account

  can not get my program works as I changed my account

  Please visit: Adobe ID, login and account help

  If doesn't allow it. Please contact support:

  Contact the customer service

  I hope this helps.

  Concerning

  Megha Rawat

• updated to IOS 9.3 and can not get the screen acativation

  Updated for IOS 9.3 yesterday and can not get past activation screen

  There is a known issue with iOS 9.3 and there is still no specific treatment. The ideas below can help, or they may not. It has been a success among others and no simple way to resolve the situation.  You can judge if you want or you can just wait and see if it fixes itself. The problem is most likely on the end of Apple, which means it is not much end users can do until it is resolved.

  Some have suggested to go to icloud.com, sign in with your apple ID and remove your device from your cloud account, and then try to activate again.

  Others have suggested to simply try to restore the factory via iTunes on your computer settings.

  The restoration works for others once they go to iCloud.com and remove their device.

  Option 4 is just wait and see when Apple can issue a fix.

  You can connect to iCloud here

  https://www.iCloud.com/

  And here is a step by step on restoring your device if you want to try it.

  http://support.Apple.com/kb/HT1414