can not insert tray multifunction color HP Laser Jet Pro 200

Similar Questions

• LaserJet Pro 200 color M251nw: laser jet pro 200 m251nw of color do not print after installation

  After having trouble with an old printer, I decided to move to a faster, apparently better model purchased in a big box store.  I set up the printer according to the instructions, connected successfully to my network wi - fi and started to install the driver with the drive on my laptop, which is also a more recent HP.

  Everything installed perfectly, but does not pass the test print.  After trying all available on the HP site troubleshooting, (turned off, disconnected, reconnected, fuel up to... uninstall, download a driver specific to windows 8.1, reboot... printing reports of wireless network test and reports configuration... Disabling 3rd party firewalls, reboot and reinstall...) Everything says it is correctly installed, the printer is displayed correctly in the control panel and is defined as the default value.  When I try to print anything good, the screen on the printer briefly flashes 'impression', then goes back to the homescreen without even a glance.  Seconds later, my phone tells me that there is an error.

  I was fed up, and HP Print and Scan Doctor gave me no indication of potential problems.  I would like a customer service representative or technician to contact me to fix this problem as soon as POSSIBLE, I need this printer for my small business and have lost a whole day trying to make it work.

  Hey @getnirritated!

  Thank you for posting back!

  Here is a list of settings for the router company to make sure that the router is configured for a printer wireless networking:

  ~ Network name and password need to have no SPACES or punctuation
  ~ Must be using WPA security
  ~ 128-bit encryption type
  ~ Double broadcast wireless b/g/n (printer connect only to g.)
  ~ MAC filter should be disabled
  ~ The multicast must be enabled
  ~ Hello must be enabled
  ~ The value dual band 2.4 Ghz
  ~ The firewall settings should be there by default, settings or the value of lower security
  ~ Please that the following ports are not blocked:
  The incoming (UDP) ports: 137, 138, 161, 427 (iPad, 80, 443)
  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500 (iPad 5222, 5223)

  I hope this helps to solve the problem!  Please post again and let me know how it goes!

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• Laser Jet Pro 200 M251nw Passw: Laser Jet Pro 200 M251nw password

  Laser Jet Pro 200 M251nw password can help you please, I tried all the known password I know but I still does not work. can you please help...

  DD955

  Hello @DD955,

  Thank you for showing your interest in the HP Forums! I see that you need the password to reset the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your name to handle just click on the envelope
  to see it.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• Ink laser jet pro 200: numbers of HP photo paper

  What are the numbers of HP Paper Photo quality for printing my color Laser printer?  I'm having a hard time finding just the photo Laser paper.  Everything seems to be for inkjet.  I think that HP made the printer, they probably have the book I need to go with it.  I want the paper to be like paper, I get prints of the store.  Just a few light paper every day.  Thank you.

  Hi @nicats,

  I see by your message you want to read a paper that you can use with the Laserjet Printer. I'd love to help you.

  You can use any multipurpose paper, bright white is recommended for LaserJet.

  Here's the color HP Laser Photo paper (glossy) for printers Laser - 8.5 x 11 Q6608A information.

  Most Laserjet printers supports the following type of paper: paper (bond, brochure, colour, glossy, heavy, paper header, light, photo, plain, preprinted, prepunched, recycled, rough), transparencies, labels, envelopes, thick paper.

  16 to 43 lb (up to 59 lbs with HP laser glossy photo paper)

  If you have any other questions, please provide the full name of the printer.

  How can I find my model number or product number?

  If you appreciate my help, please click the button below the thumbs up.

  Good day!
  Thank you.

• Laser Jet Pro 200 color MFP m2: yet another scan inaccessible victom!

  Like many people here, my HP Lj200 M276 Scan software decided to stop working. I have installed and reinstalled the software, running printing HP Scan doctor, arrested and and started WIA and practically everything else except the reinstallation of the operating system, but I stll get THIS...

  

  When I run the HP print and Scan doctor, I get the following results when you try to fix the scanner...

  

  What the HELL am I supposed to do now? I have already started, stopped and reset the WIA and depedant services without solution.

  Well well, after much experimentation, installation/uninstallation of drivers and to change network configurations, I found the solution.

  Do not use wireless!

  Going back through the history of my network, I realized that the last time that my scanner was working is when I got the printer connected to the router with a cat5b ethernet cable. So I released a port on my router, disabled the function the printer wireless and cable.

  Down and behind, the scanner software works! I can scan with the 10 Windows scanning program and the HP scanning software.

  The only explanation I can come up with, is the different network speeds, that my router supports. The wired devices run at 100Mbit, while wireless devices can be executed at 50Mbit. When I on the printer wirelessly, my computer has been connected to the router.

  When the software is run, he tried to scan, I could hear the scanner run. But to halfway through its operation the error jump upward. When I used another wireless device to scan from the printer, in this case a laptop, it worked without problem. Now that the printer is connected to the router matches the speed of the network from my computer and the printer and everything is good.

  Also, the laptop works also, so this suggests that software was delay due to the faster connection, before the printer to finish as long as the speed of connection of printers is half that of the computer.

  This is just speculation, but with everything that I've tried that sounds plausible. In addition, it's not like Support HP offered no solution, then this is the best I can find. Whatever it is, my scanner and the software works.

  Speaking of the HP support.

  Good on ya' guy to show once AGAIN how USELESS you are!

  Not a suggestion on one of the many posts I have contribited to how solve my problem. WHat than a forum of support if you do not have FICHUS ANSWER YOUR CONTRIBUTORS MESSAGES?!

• Laser Jet Pro 200 M2 MFP color: stopcock on printer laser jet pro 200 alerts

  How to stop printing alerts "beep".

  Hi DerekNCR,

  Thank you for explaining that to me.

  I don't know why the printer is beeps sounds every time that you try to print. The printer should just do normal noises when printing or treatment, but not a beep sounds.

  You have the printer connected to a UPS power?

  I heard of this printers causing to make beeps sounds. Weird I know!

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  The printer has only Fax sound volume in the options screen to change. If you have a fax cable connected to the printer, unplug it to see if it is the culprit.

  • The alarm volume
  • Ring volume
  • Phone line Volume

  Please hold me.

  Thank you.

• HP LaserJet Pro 400 color: HP Laser Jet Pro 400 color M451dn

  Just got back from vacation and the language on the digital screen has changed I have know idea what language it is, how do I get it back to English.

  Thank you!

  MontC

  You can try the steps below to change the language to English:
  1. Click Start , click all programs.
  2. look for the HP list, that you highlight of HP, right, will open another menu that displays your printer.
  3. highlight the name of the printer, and that opens another menu with box tool from the HP device. Click the device HP Toolbox.
  4. a page opens. Click the System along the top and which opens a drop-down menu. Click on System Setup. This page of research and in the middle is language and select English. Click apply and close the window.

• Laser Jet Pro 200 Color MFP: cannot scan from 10.8.5 OSX system preferences

  Have recourse to the scanner via the preferences system for 2 years. This was recommended to me at Office Depot when I bought the machine.

  Now I have 'the scannner impossible to complete the scan.

  Copy works by function (from the machine), so scanning / copy glass is OK. Printing from the computer works as well

  (connected by USB).

  Earlier today, before installing the printer v3.1 for OSX driver, I got the message "error com.apple.imagecapturecore 9930.

  I have reset the system twice.

  Am currently with all updates.

  Still does not scan.

  Any thoughts?

  Hi @PhilJ1,

  Please try these steps, it should help, How to open the applications of a developer not identified in OS X Lion mountain.

  Thank you.

• HP Laser Jet Pro 200 color MFP m276nw

  How do I change of printer cartridges?

  Here is a link that will help and guide you to replace the toner cartridge.

  http://support.HP.com/us-en/document/c03416779

  Let me know if you get it to work successfully, thank you.

• Jet Pro 200 M276mw MFP laser: laser jet pro 200 MFP report print fax confirmation

  How can I configure the MFP to print a confirmation report after each outgoing fax (date/time / #pages/recipient/etc)?

  Hello

  The printer click Fax, and then click the Fax Menu.

  Click Fax reports, and then click Fax of Confirmation and replace value "on Fax Send'.

  If you want the confirmation to include a thumbnail of the 1st page you can set as on "include first Page."

  Kind regards

  Shlomi

• Laser jet pro 200 M276NW MFP: enlarge a picture on multiple pages

  I need (copy) and enlarge an image and make it so the image will be printed on additional pages instead of print on one page only, and ending up with only part of the picture. Is there a way to do this?

  Hello

  You will need to scan, save the picture, blow up and print, it will be printed on multiple sheets.

  Kind regards.

• I'm working on an evaluation version (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  I train on a trial version 2015 (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  It has changed a lot since CS6 DW is released in 2012.  Often people read the tutorials that have been written for this version and do not understand that it is more relevant for DW CC.  Below of the links that describe in detail the changes in each version.

  List of deprecated features:

  http://helpx.Adobe.com/Dreamweaver/using/the-new-modernized-Dreamweaver-cc.html

  New features in CS6 12.2

  2013.html http://helpx.adobe.com/Dreamweaver/using/Whats-New-Dreamweaver-Creative-Cloud-Release-Feb-

  New features in CC 13.0

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-CC-2013.html

  New features in CC 13.1

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-131.html

  New features in CC 13.2

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-13-2.html

  New features of CC June 2014

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-2014.html

  What's new in October 20141 CC & February releases

  https://helpx.Adobe.com/Dreamweaver/using/whats-new-2014-1.html

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  Nancy O.

• HP Laser Jet Pro M251 nw: HP Laser Jet Pro M251 nw do not print Green

  I use a HP Laser Jet Pro M251 with Mac OS more recent Sierra 10.12. I tried to print a document in color from Excel and others a good percentage of the document should be printed in green. Instead of green, a very light, in some cases the struggles of the naked eye to see light YTYPE prints instead of GREEN. I then ran a test of the printer color page of the utility application of HP and there is no green anywhere on the page.

  All of my cartridges are 80% full or higher and I use the same newspaper, I am using since I bought the printer a few years ago. Indeed, nothing in my usual routine (for example all consumables and accessories) has changed. So, for the most part, my printer is not good for color printing.

  If anyone has had this problem and, more importantly, knows how to fix? I don't want to buy a new printer, but if I do, and if this problem is not easily corrected, I will not buy another HP. I'll check Consumer Reports to get advice on a new laser printer. I really liked this good printer and have, until today, thought it was an absolutely fantastic printer.

  Please help if you can. Thank you for your useful answers.

  RG

  RG

  Just a tip, I discovered the problem. It turns out that the Cyan cartridge was not good.