Can not keep the computer in mode 'sleep '.

Similar Questions

• can not place the computer in mode 'sleep', continues running

  Computer is going mode sleep an hour. It stops and starts after one second

  Hello

  Try to make adjustments in the power of the Plans by going to control panel.
  Else try to uninstall the graphics card and re - install the correct drivers.

  --

  Saurabh Yadav
  E-mail address is removed from the privacy * Saurabh Yadav * address email is removed from the privacy *.

• ZBook17: How can I keep my laptop switch mode 'sleep'

  How can I keep my computer to switch into mode 'sleep'. At the moment, the screen turns off in a minute about. I adjusted all the settings of power, but nothing seems to help.

  I regret that none of these steps seems to fix your problem, it's frustrating. Here are some more that you can try to see if the problem is resolved or changes in some way:

  1. Installation/update antivirus application and definitions, then run a virus in Windows scan check that no virus or malware
  2. Disabling hybrid sleep in Windows
  3. Disabling the requirement for password during the resumption of the mode standby
  4. Try a different power source

  If you need instructions on how to perform these tasks, see the following document:

  http://support.HP.com/us-en/document/c03383935#AbT2

  Thank you!

• I got the error 0x8000FFFF: catastrophic error on windows XP pack 3 service. How can I fix this? I can do everything, but can not get the computer to detect wireless networks?

  I used disc cleanup and bang this error came. I don't know how or why. I can't use internet somehow. Normally, I connect to the internet with our home wi - fi connection. But my computer now sees not all networks wireless at all. I made sure the wireless switch is on and my son checked all settings network... still nothing. I am quite at a loss to solve this problem and do not have money to take right now to a pro. Help please?

  I also got the problem devices following system infor...

  Atheros AR5007EGwireless AVG mini port network adapter driver pnpdevice I\D ROOT/GR_AVGFWMP\0002 error code by using the V & D charger

  Atheros AR81 32PCI-E FastEthernet Controller AVG miniport driver ROOT\GR_AVGWMP | ooo1 failure using the V & D charger

  iecont.dll missing file

  iecontic.dll missing file

  ieuinit.inf not available

  Proxy disabled

  Disabled Access Manager

  Thanks a lot if you can help. The computer is a netbook with a screen 10 inch aspire. It's an older version, but is running windows xp with service pack 3, I use a laptop plus old to communicate with you and will continue to do so, to read your tips, thank you again.

  E-mail address is removed from the privacy *.

  Hello Sharon,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• Is it better to put the computer in mode 'sleep' when using not for an hour or so?... or turn the system off

  Is it better to turn off the computer if only to use it for an hour or so?  orput it in 'sleep' mode I have Windows 7

  On Sunday, February 26, 2012 19:39:20 + 0000, Anthony.J wrote:

  Is it better to turn off the computer if only to use it for an hour or so?  orput it in 'sleep' mode I have Windows 7

  This question is asked on a regular basis and collects generally all kinds of
  fervent responses on both sides of the issue. Some people never
  turn off their computers, saying their deactivation can cause the
  material to fail early. Others turn them on and off several times
  every day, to save electricity.

  My opinion is that it doesn't matter much anyway, and you should
  do what suits you best. Personally, I turn on once a day, when I
  get up in the morning and turning off the power once a day, when I go to bed at
  night.

  Ken Blake, Microsoft MVP

• Why Firefox freeze and a box rectangular white happen on my Mac screen after the computer enters mode "sleep"?

  Why found frozen Firefox and a rectangular box on my MacPro screen after that the computer goes into screensaver mode and I come back to type it in again? I Force-Quit Firefox and restart my tabs from scratch.

  It got so annoying that I switched to Chrome for a while, but Chrome is a hoarder of power who wouldn't let me download at Amazon cover for books printed images as I write. I want to go back to Firefox, but the only way to prevent him from dying on me is to keep completely off the screen saver and sleep-ECOMAT modes. It started happening after I installed the new OS from Yosemite, then maybe it is a conflict of some sort.

  Here is a screenshot of the appearance of the white box on the Firefox screen frozen. Well, hmm. It seems that this image be download! Well!

  Anyone know what the problem is or how to fix it?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• WPA - PSK, BEFW11SA, can not connect the computer to the network

  When I enable security wireless mode WPS Pre - Shared Key, algorithm, TKIP, a 9-character key and key group og renewal 3600 and then configure the computer, the computer is not connected to internet, even if the connection is recognized.

  When I created my Linksys BEFW11SA with "Wireless security" disabled, my computer has no problem connecting to the internet.

  Somehow, I'm sure that the problem is related to the configuration of the WPS, but I don't know what to do.

  I run XP sp 3. Router firmware version is 1.50.11, which I think is the last update (1.50.13 in mentioned on the home page of Linksys, but the corresponding version notes give the 1.50.11 version) the router does not have common WPS - PSK option with XP, so I couldn't try to use WPA2 or other options.

  Can someone please help?

  / JanB

  You tried the WPA key on your router and still it dosent work, you tried to secure your network using the WEP password. If it isn't then you can try settings WEP key password on your router and check if you are getting connected to your network on your laptop or not.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Now let's see if you can locate your wireless network and try to connect...

• How to keep your computer in mode 'sleep'

  You want to put the computer in standby mode during the night.  Click sleep with only stay menu but will start in the mode "sleep" for a minute or so and then comes back on.  Why?  How do I so he could sleep till 02:00 anti-virus at startup?

  Hello

  You are not interested more trying to get your PC in mode 'sleep'?

  Try to get the information that I requested and also try this.

  1. click on start.
  2. click on Control Panel
  3. click on Click System
  4. click on Device Manager.
  5. click on the plus sign on NICs droping it down and right-click your network controller, click Properties.
  6. go in the tab power management, uncheck "allow this device to wake the computer".

  Do the same for the mouse and keyboard as well...

  Report if it helped to solve the problem!

  Thank you

• 7520 scanner can not find the computer

  I have recently upgraded with Microsoft system to the top grade, but not my scan on my HP PhotoSmart 7520 function cannot find my computer thaough connections seem to normall and print functions are normal.

  Before I read your announcement, I discovered that I needed a date and downloan again up. the update included the Scan Doctor running of tune. He even asked if I had recently move to 8.1 that I had done on Sunday 6/22.   When I said yes, he went in a programming mode.  The strange thing is that the HP Wizard program has been allowing me to run a crawl across the screen of the computer, but the unit still was not not find my computer by itself. I will say the the scan doctor porgram is a little tenacious program and he told me is not to use the USB connection.  He finds another option on the settings of wireless network that has an older connection and he told me to use this site to my wireless network settings.  After I did all of this beautiful work.  I regret just that I stayed until 02:00 trying to figure out the problem, when it comes down to it, the program of troubleshooting on the HP site does not offer many options and it is not helpful at all.  Your announcement repeated good number steps that I discovered on my own.  Thank you

  davekap

• Can not keep the correct time on my laptop Dell M4500

  Hi all

  I, ve problem with time on my Dell M4500 laptop a few months. I tried several solutions but not worked. time holds as long as the used laptop however wake up after sleep time shows right from the start of the commissioning (sometimes for seconds, sometimes for a few minutes) and sets then went back to a wrong value. I checked the weather it is time windows or time of bios, actually, it was the time of bios that changes after getting return of mode 'sleep' and windows after the bios later time, and if I want to correct then I have to restart, go to configuration, change time bios and then continue until the next time...

  I, ve tried the following:

  battery 1-i bios modified by a new Dell... unsolved problem
  2 - Dell has provided new motherboard with a new battery (verified) and the last update of the bios > problem unsolved
  3 went to services.msc and turned on/start/stop windows.time service > problem still there
  4 enabled auto-sync > problem unsolved

  y at - it an idea about this problem? in fact I ve called Microsoft but they replied that time BIOS cannot be changed or affected through Windows because windows does not have access to the bios time, however after change of motherboard (changed with a new one) is it a physical cause for this problem?
  any help? Thank you
  Saami

  1. click on the date and the time on the taskbar.

  2. click on change date and time settiings
  3. now check if you have set the correct time zone. If not, click on change the time zone to your local time location and click OK.
  4. now click on the internet time tab.
  5. click on change settings.
  6. then check it in as a "synchronize as internet time server.
  7. then click Update now.
  Try the following steps

• Example: HPcompaq mintower7900: can not start the computer

  Hi all

  I need help from anyone who helps, when I try to start my computer by pressing the power button, the first time it starts and all the fun of but only run it for the fun of a few seconds then stops. When I remove the battery, CMOS and RAM for about 5 minutes and then put back them. When I start it starts well. When I try to restart, it restarts fine, but when I turn it on turn off it starts and all the fun of but only run it for a few seconds the amusements stops and nothing is visible on the screen.

  I tried to replace the RAM and CMOS, but it always behaves in the same way. My computer is HP Compaq 7900 Mini-Tower Core 2 duo. I'll be happy if my problem is solved.

  Finally, I found the solution. The problem was the switch, when I changed the switch, the computer was fine to start normally.

• I want to install an OS but can not get the computer to let me install.

  I can't find a command prompt or in safe mode, any suggestions?

  Please check these previous discussions on how to install Windows 7/XP:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-install-a-full-version-of-Windows-7/8e616db0-7324-48f6-8317-eee706daa699

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/can-someone-explain-to-me-how-to-install-Windows/6325618f-8AB9-4E96-AC56-1e119983de25

• Internet stops whenever the computer goes to sleep.

  Original title: run a convenience store on the laptop to use internet every time I turn it on
   
  Whenever the computer is turned off, wakes up from his sleep or I close the cover and re - open, internet goes off and I can't get online. I have full WI - FI bars so I don't know what the problem is. I must restart the laptop or run a troubleshooter to get the internet working again. When I run a convenience store I get a message saying "the default gateway is not available - fixed ' with a small green tick next to it. I have to do this every single time and it's annoying me so, especially since it's a brand new laptop. I get no error message when I go on the internet just "the Web page is not available. The problem is not the WI - FI, as I had other laptop works well as well as many other WI - FI devices. Any help is very appreciated.

  Hello

  Thanks for posting the request in the Microsoft Community.

  According to the description, it looks like the connection Internet is lost when the computer "stops, wakes from sleep or when you close the lid and re - opens.

  This problem occurs if the computer enters sleep or hibernate until he finally notice the part of the system that controls the network-icon feature.

  Method 1:

  To work around this problem, use one of the following procedures:

  a. restart the computer.

  b. complete the Explorer.exe process and restart this process. To do this, follow these steps:

  i. open the Task Manager. To do this, press CTRL + SHIFT + ESC on the keyboard, click on more details to decompress.

  II. click on the processes tab.

  III. in the list of processes, click on explorer.exeand then click end process.

  IV. When you are prompted to confirm that you want to continue, click on end process.

  v. on the file menu, click new task (run...).

  VI. in the create new task dialog box, type %systemroot%\explorer.exe in the Open box, and then click OK.

  Method 2:

  Disable the power management feature in network adapters

  (a) Press Win + c on the keyboard to open the menu of charms.

  (b) Control Panel type on the charm of the research.

  (c) open the control panel.

  (d) open the network and sharing Center.

  (e) click on change settings card on the left side panel.

  (f) right click on the respective network adapter.

  (g) click on properties.

  (h) click the power management tab.

  (i) ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  (j) when you have disabled the boxes, click ok, and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Try the following steps and answer if you need help with this problem and we will be happy to help.

• Windows XP crashes and freezes. I receive Stop errors that say I can't restore the computer.

  I have a Windows xp that fails and frequently freezes when I restart my computer, it says it was a stop error that I can not restore the computer because its been there for months and I don't know when to return to I'm pretty certain that it was a virus, but whenever I go to scan the computer , it crashes can anyone help me with this problem?
  original title: help with freezes and freezes

  Hello
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian