Can not uninstall program called tv.addons.ag, and I get an error-NSIS error message?

Similar Questions

• When you uninstall a previous version of the player, I get an error message about the paths of transformation

  I tried to uninstall the version 8.1.2, and I get an error message to check that specified transform paths are valid. Some body please help. I could use the 90 MB of space, he resumes.

  My system is a laptop, vista 32-bit. No problem of security update is involved. I'm running version 10 and just want some memory back.

  If you feel you need to clear 90 MB. I suggest to get an additional storage medium (external HD,...). In any case, you can try the following:

  Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Uninstall the reader using Add/Remove programs

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• I tried to upgrade from Microsoft office 2003 and 2007, and I get this error message: Error 1606 could not access network location %AppData%.

  Now, I can not uninstall, repair Office 2003 or 2007. and my microsoft office 2003 documents are less error out when I try to open them.

  Hello Answerspls09,

  Thanks for providing the information.

  Solution:

  Check with the below weblink.
  __________________________________________________________________________________

  "You receive an"Error 1606"error message when you try to install or remove a program from Microsoft"

  http://support.Microsoft.com/kb/886549

  __________________________________________________________________________________

  ["Windows Installer Error 1606" error message when you try to launch help in Office 2000 programs]

  http://support.Microsoft.com/kb/313257
  __________________________________________________________________________________

  That should solve your problem.

  Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• I try to install Google Earth and its failure and I get an error message: 0 x 80070002, how can I fix?

  I try to install Google Earth on my Windows Vista Edition home premium and its failure and I get an error message: 0 x 80070002, how can I fix?

  The error message indicates "file not found" - which often means a bad download.

  Try another download of Google Earth - if the operation fails with the error message, then...

  There are a few things you can try to solve this problem: -.

  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type
  CHKDSK C: /R
  and press the Enter key
  We'll tell you that the drive is locked and the CHKDSK runs the next time he started - press Y and restart. The chkdsk command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto) - then run the SFC

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Try installation again
   

• I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.

  Hello

  Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.

  Download Adobe Creative Suite 5 products

  Thank you.

• I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  Please specify the version of Mac OS for reference. just in case if the procedure below did not work.

  N ° 1)

  1) click the icon of the Apple menu and select System Preferences, and then click Network.

  (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

  (3) then click on the Advanced button, then click proxies.

  (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".

  (5) then click on the Apply Now button.

  Then try to reinstall Adobe Creative cloud,

  Always the same?

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  
  

  
  

  
  

  
  

  
  

  
  

  ------------------------------------------------------------------------------------------ -
  

  No entry to Adobe? You can follow the procedure below:

  -----------------------------------------------------------------------------------------
  

  Please follow the steps below:

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  
  

  
  

  Step 2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  
  

  Step 3)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.

  
  

  Step 5)

  
  

  
  

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.