Can satellite S70T-A016 - work on the 5 GHz wireless?

Similar Questions

• Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• East - the Pavilion 20 it be upgraded to the 5 GHz wireless card?

  The HP Pavilion 20 can be improved to support the 5 GHz wireless card?

  HP Pavilion 20-b010 all-in-One desktop computer
  http://support.HP.com/us-en/document/c03524659

  This computer has an integrated Ralink RT-5390 mini-map PCIe wireless.
  http://www.MediaTek.com/en/products/connectivity/WiFi/PC/PCIe/rt5390/
  This card is the only ONE BAND (2.4 GHz), supporting IEEE 802. 11 b, g and n

  IF you wish for the 5 GHz band,
  THEN BOTH devices must support the new IEEE 802.11ac Standard Dual-Band.

  FIRST, a wireless (WAP) access port or Wireless Router on your home network must be Dual-Band (IEEE 802.11ac).

  IF this equipment is provided (for rent) your provider of wireless Internet (ISP).
  THEN, you will need to work with them for this upgrade (may have fees $$).
  IF you have your wireless router, THEN it must support IEEE 802.11ac for the 5 GHz band.

  SECONDLY, your HP Pavilion 20-b010 all-in-One will require a new (replacement) wireless card and MAY require the replacement of the antenna (dual-band).

  The AC-7260 Intel Dual-Band with Bluetooth 4.0 is a topic highly IEEE 802.11ac compliant PCIe minicards.
  IF you only had previously not supported Bluetooth, THEN this additional feature is a BONUS.
  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

  UPGRADE and MAINTENANCE GUIDE
  for computer all-in-one HP Pavilion 20-b010
  http://h10032.www1.HP.com/CTG/manual/c03598525.PDF

• Can satellite R630-13U - I recover the password of the BIOS?

  Hello, toshiba the entire community, I write from Spain, Seville.

  My question is this. How can I reset or remove the bios password?

  Informcion my laptop:
  Model: R630-13U Satellite

  You can do it yourself. Only the Toshiba service can do for you.

  Contact the nearest service Toshiba and ask for help.

• Can satellite L350 - 20G - I put the CPU?

  Just got a Satellite L350 - 20G with a Celeron T1600 and I was wondering if anyone new what processors are compatible with what I think the upgrade? I was thinking the Intel Pentium Dual T3400, but is there something faster?

  Thank you

  Hello!

  Just a question: why do you think an upgrade of CPU so just got this laptop? Why you didn t buy a laptop with Pentium processor?

  In any case, an upgrade of the CPU is not supported and you will lose the warranty. In addition, I think that the BIOS and motherboard do not work with the other CPU.
  If n t believe you, see this article:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Good bye

• Re: Can Satellite L30-106 - I switch the RAM to 2 GB?

  Hello
  I want to upgrade the Ram in my Toshiba L30-106 running Vista. The vehicle currently has 2 * 512 MB modules. In the specifications it says it can handle maximum 2 GB of Ram. Is this correct?

  Can I upgrade using 1 * 2 GB or 2 * 1 GB modules? Dual channel RAM will make a significant difference?

  I can say I should use modules DDR2-533 PC4200. I'll use Kingston, but they have Toshiba modules (start with KTT) and regular ones (KVV). It is important that I use?

  Claus

  Yes, you can upgrade the Satellite L30 to 2 GB.
  In addition, you should buy modules with 1 GB because so you can use dual channel mode. This makes the theoretical specifications a little faster.

  For the upgrade, you can buy RAM DDR2-533.
  The part number for a 1 GB module is PA3411U-1M1G

• Can satellite L300-11 - I replace the CPU for the Core 2 Duo T7100?

  I have laptop Toshiba L300-11F. It integrates CPU INTEL CELERON CPU 550 @ 2 GHz, socket 479P. Can I replace this processor on the socketP478 of core2duo T7100 and know if it will work on 800 MGz?

  Hello

  I doubt that you could use this new processor.
  One main thing is important; the chipset of the motherboard must support the new processor. If the chipset will not support the new processor then you can not use it.
  In addition, you can use a CPU with a different outlet

  As indicated in your ad, the new processor supports different socket and therefore it will not match with the motherboard.

• Satellite A300 HDD work with the PS3

  Hello
  My cell phone charger does not work and I want to improve my ps3.
  The fact of the hd in the work of the a300 with ps3. If so how I get out?
  Cheers, Matty

  Hello

  PS3 uses HARD drive 2.5 SATA.
  I've also got PS3 and updated the 500 GB HARD drive.
  I used a SATA 2.5 HARD drive with 5400 RPM

  I guess the A300 uses SATA HDD too but I'm not sure about the speed

  So generally you can use this disk in the PS3

• Can V5 591 G work without the built-in battery?

  Hi, guys!

  My laptop is connected when I use it and my personal experience, the guidelines of the Acer in the user manual and this link here http://acer.custhelp.com/app/answers/detail/a_id/2384/~/how-to-charge-and-care-for-your-acer-battery on how to extend the life of the battery, this can severely affect it, so it should better be deleted.

  Unfortunately, the battery of my model is not easily removable like on my previous laptop, so I would like to know, if I open the bottom cover and remove the baterry, will this void my warranty and will laptop funtion without the battery?

  It will work without the battery probably fine, but leave the battery in a drawer does not really the battery in good shape. If you leave it outside, you must challenge once in a while and let drain a little and recharge. I put a new in the drawer for about a year and a half and it degraded just sitting there.

  There is also the part of power failure. Without battery, the power goes off and the laptop just dies instantly. Not only you lose any possibly work, but it can cause system problems and sometimes damage the laptop.

  Modern power management circuit will prevent "overcharge" the battery, even if we let him load 24/7. He that is detrimental to the battery recharges 100%, let it drain completely or nearly completely then recharge to 100% several times. This puts a lot of wear and tear on cells.

  Try to keep your load between 20% and 80%, while making only a FULL load + discharge cycle once in a great while. This preserves the overall longevity of the ability of the battery to hold a charge. In addition, the cooler you keep the laptop, the better for the battery as well.

• Can satellite A300-15J - I exchange the faulty card?

  I think I can have exposed my soundcard of the A300 to too high voltage to the 3.5 mm jack. There is no device for playback/record listed (only connexant HD) and a hardware scan detects any device (Vista). I have a system dual boot, and the same thing happens if I boot into Win 7.

  When I tried to start this morning there is a static sound from the speakers and white screen. A new round of power started the laptop with no sound coming from the speakers.

  Anyone know if there is a replaceable module of its edge, or if the sound is integrated on the motherboard? Is it profitable to repair a Board if the sound is integrated? Is it possible that there is just a fuse or a discreet component damaged? I think that there is no provision in the BIOS or any device management utility.

  > I think I have exposed my soundcard of the A300 to too high voltage to the 3.5 mm jack.
  Out of curiosity, but what did you do exactly? I mean, how it is possible to damage the sound card via this port?

  In any case, I m not 100% sure, but I think that sound card is onboard, and you will not be able to exchange it. I m afraid entire motherboard must be replaced. That's the big problem now, and I don't really know what should be the best solution for you. If possible try to contact an expert for electronics and explain the situation.

  And there is another problem: where to get the sound module? It is not so easy for machines to find such components.

• Can't open at work after the OS update to 10.11.3

  I tried to update my Early 2011 MacBook Pro to 10.11.3 and after opening would not work, at the beginning he said my copy was cancelled (it wasn't in the earlier operating system).  I couldn't make it work so I returned to the earlier operating system - in my case 10.8.5.

  Has anyone else had a similar problem?

  Thank you.

  What version of Aperture you have installed?

  Opening 3.6 works perfectly fine for me on El Capitan 10.11.3.

• How to connect my model 15-j053cl with the 5 GHz wireless signal

  my new 15-j053cl can't see 5 GHz Wireless ssid.

  Hello

  The Intel Centrino Wireless - N 2230 is a single gang adapter and works on the 2.4 GHz ONLY band. It doesn't have Bluetooth.

  He also mentioned its specs:

  http://www.Intel.com.au/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

  Hope this is what explains why.

  Kind regards.

• WiFi connections: Laptop HP cannot find the 5 GHz wireless signal?

  Hello, this is my first post I just bought my first laptop and my first wireless router and have been setting them up.

  Laptop: HP touch laptop Pavilion 15 15-n088ca with windows (fully updated) 8.1

  Router: D-Link Dual Band AC1000-band 2.5 GHz & 5 GHz DIR - 810L

  I configured the router and worked out the kinks and updated the software.  My laptop detects and connects with the 2.5 GHz Band anywhere in the House.  My laptop does not even find or see the 5 GHz Band.  However my Galaxy Tablet concludes the two bands and can connect at once, thought the 5 GHz seems weaker.

  I noticed that my Galaxy tablet is much more WiFi networks that my laptop (that are in the houses around the street).

  I have need help troubleshooting and problem solving.  I think that my laptop would find the 5 Ghz band and be able to connect. So I hope that it is a software or driver problem and just a setting that needs to be adjusted.  Any help would be appreciated.  I don't know much about the WiFi drivers, but I'm a survivor of Vista, so I should be able to solve this problem.

  I don't know even what kind of program is running the WiFi software on my laptop? Or where to find it?

  Thank you

  Hello:

  Welcome to the HP consumer's Support Forum.

  I'm sorry that I'll have to disappoint you on your first post, but according to the specifications of the product on the link below your laptop comes with a single wireless card band (2.4 GHz) with bluetooth.

  http://support.HP.com/us-en/document/c03940371

  I can tell this by the description of the WLAN card.

  He is listed as a 1 x 1 802.11b/g/n WLAN.

  Whenever you see a closed wlan b/g/n card, it's a map of the only band (2.4 GHz).

  A dual-band card would be qualified bird a/b/g/n or a/g/n.

  When I look at the parts list for your laptop on the link below, the last listed item is the wireless card there.

  Atheros AR9485 wireless 802.11b/g/n 1 x 1 adapter

  http://PartSurfer.HP.com/search.aspx?SearchText=F0Q62UA

  Googling the specifications of the card, I found that will confirm what I wrote above.

  http://reviews.CNET.com/adapters-NICs/Atheros-ar9485-802-11/4507-3380_7-35558446.html

  So there is nothing wrong with the wireless card or router.

• WRT610N: portable computers cannot connect to the 5 Ghz wireless network!

  Hello

  I have a Linksys WRT610N (material v1) router, and I have configured settings wireless for the range of 5 Ghz and 2.4 Ghz

  wireless network, but the problem is that my laptop (wifi compatible n) detects the 2.4 Ghz network, but is NOT the

  5 Ghz network.  I have no idea what the problem could be :-(

  Here is my setup :

  (5 Ghz) wireless network settings :

  network mode: only wireless-n

  network name (SSID): WRT610WiFi-N

  channel width: auto (20 or 40 Mhz)

  broad channel: auto (DFS)

  standard channel: auto (DFS)

  SSID broadcast: enabled

  (2.4 Ghz) wireless network settings :

  network mode: Wireless - g only

  network name (SSID): WRT610WiFi-G

  channel width: only 20 Mhz

  broad channel: auto

  standard channel: auto

  SSID broadcast: enabled

  Security on the two mode is 'WPA2-personal' and "WPA-TKIP or WPA2-AES" encryption

  But my laptop do the WRT610WiFi-G and not the other :-(

  Currently, I am a bit disappointed as you can understand, but I hope someone here can

  give me a solution for this problem...

  Best regards

  Chris.

  Fix. Should be a/b/g/n

• The 5 GHz wireless router connection

  I have 2 laptops (Inspiron 1525 and 1545) and I was wondering if I can connect to my dual band 5 GHZ router with this?  I don't see the SSID in my area wireless on my computer.

  My laptop are compatible with a connection to 5 GHz?  If not, is there an adapter for it, how much, and it is easy to do?

  Alex,

  A wireless USB adapter 5.0 GHz network is the fastest and easiest way. You can buy a card to install the appliance. The adapter inside the probable has 2 sons

  Rick