WRT610N: portable computers cannot connect to the 5 Ghz wireless network!

Similar Questions

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.

• Computers cannot connect to the server mirgae

  Hello

  I have the following problem.

  We have install a Mirage 4.0 Server and installed the Mirage-Agent to 10 customers.

  Eight of them are working properly. The other two cannot connect to the server. I figured out the they do not have a UUID in the BIOS.

  Mirage-server log appears in the event log, as the uuid = ffffffff-ffff-ffff-ffff-ffffffffffff on both computers.

  How can I make unique to the mirage computers?

  And how the mirage will create the AgentID?

  Thanks for your help?

  Sebastian

  Mirage uses the BIOS UUID and serial number to identify an endpoint. When one of them is absent, the other is usually sufficient.

• Xbox/PC cannot connect to the 5 GHz network (E4200 v2)

  My network is detectable, but my machines will not connect (they were already connected).  They can connect to the 2.4 gHz network, but not the 5 (I use 5 for the streaming of media and gameplay).  Windows 7 says it's unable to connect.

  Please help a n00b networking.

  According to the scenario, try the following combination of steps:

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] then go to the wireless network mode tab keep as mixed,

  For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

  Second, update the drivers for the card wireless laptop and Xbox, then check the connectivity status.

• Cannot connect to the nintendo wii wireless router

  Original title: WiFi

  IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.

  Hello
  You try to connect the nintendo Wii to router or laptop?
  
  Try this:

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '.

  3. click 'Connection settings', and then select a connection that marked 'None '.

  4. Select "Wireless connection" and "Access Point search."

  5. choose what access point to connect to, then click on 'OK '.

  Manual installation

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.

  3. choose "Wireless connection" and "Manual Configuration".

  4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.

  5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.

  6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.

  7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.

  8. choose 'Save' and 'OK '. Select 'OK' to test the connection.

  If this does not work, contact nintendo for best support.

  Online connection support

  http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp

  Troubleshooting wireless router

  http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Cannot connect officejet 6500 to a wireless network on a MacMini

  Product: HP OfficeJet 6500 E710n-z

  Firmware version: CIP1FN1126AR

  Operating system: Mac OS 10.6.8

  Error message: unable to connect to the network. MAC address filtering can be enabled on your wireless router...

  Analytical diagnosis:... No filtering: FAILURE

  Here's the implementation. My MacMini is connected directly to the Internet. I turned on Internet Sharing in OS X to share ethernet connection of the MacMini to the Internet through an integrated Wi - Fi AirPort card from the MacMini. Other devices such as iPhones are able to see the connection network and access after I provide the right WEP password.

  The HP printer see the Wi - Fi, but after that I provide the correct WEP password, it still does not connect and tells me that I must have active filtering by MAC address. The HP is still unable to connect wireless even when I disable firewall in Mac OS x.

  I cannot find any setting in Mac OS X to enter the MAC address of the printer.

  I would like to be able to use wireless printers features, but can't because I can't clear the checkpoint.

  Help, please.

  I was able to get the printer and the computer communicate wirelessly by following these steps:

  1. connect the printer directly to the computer via an ethernet cable.

  2. open the Utility from HP (version 5.0.1) application > click the settings > in group settings of the printer , click additional settings > click Open built-in Web server .

  3. once the built-in Web server opens, click on the network tab, and then click the Advanced Options link in the group Wireless (802.11) in the left navigation sidebar.

  4.1 Network Interface onvalue.

  4.2 under network name, set RITS at the same entrance shown in System Preferences > sharing > Internet sharing > AirPort Options > network name field.
  4.3 under network settings, select Infrastructure.

  4.4 Select WEP encryption.

  4.5 authentication sharedvalue.

  4.6. Enter the appropriate WEP key WEP key and confirm the WEP key fields.

  4.7 click the apply button to save the changes.

  5. unplug the printer from the computer by disconnecting the ethernet cable.

  6 re - activate sharing Internet on your Mac if necessary (i.e. If you disabled in step 4.2 to get the SSID name).

  After having done that, I am now able to print documents from my MacMini to my HP OfficeJet wireless. I have not tested other functions of the printer to see if I can scan, fax or set up ePrint AirPrint, but at least for basic printing I can do wireless (for now).

  That will suffice until I can buy a dedicated wireless as an AirPort Extreme router.

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• Connect to the printer via wireless network

  I have a hp photosmart 7760 connected to my main PC, which is connected to my home network.  This PC is Windows XP.  I just bought a new laptop running vista 64-bit.

  When I try to connect, it tells me that I have not install the correct driver.  I downloaded and installed the driver 64 bit vista from the internet, but it still does not work.

  What is work?     Now, I wonder if I need to install this driver on my main PC... and if yes, which ruin my ability to print from this PC?

  A big thank you to anyone who can help me.

  I tried the procedure described in the thread in my previous post and it works like a charm!

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF