can someone tell me what are these boxes and why they keep appearing? I need to restart my computer to get rid of them?

Similar Questions

• Can someone tell me what are these two programs and what they're doing, Microsoft Visual C++ Redistributable, and AMD USB Audio Driver filter?

  Can someone tell me what are these two programs and what they do?

  1 Microsoft Visual C ++ 2005 Redistributable 2. AMD USB Driver Audio Filter (Advanced MICRO Devices Inc.

  .

  Hello

  Here's the explanation for details, requested clarification on the following programs.
   
  1 Microsoft Visual C++ 2005 Redistributable
   
  Most common programs are written in a program called C and C++, which is widely used by developers and they are a source of standard libraries what software use to support and to perform their designated functions.
  
  When software is installed in the computer, he needs help / support of software of Visual C++, in order to avoid a software to download the copy of its source or support a coding Windows has integrated the software and download and storage space a s it updated to make it available to the software and to avoid unnecessary.
  It is strongly recommended that you keep your C++ updating so that no Microsoft software or third party to download an individual component each time.
   
  http://www.Microsoft.com/downloads/details.aspx?displaylang=%20%20%20EN&FamilyID=766a6af7-ec73-40ff-B072-9112bab119c2#AdditionalInfo
   
  2. filter driver Audio USB AMD (Advanced MICRO Devices Inc.
   
  It is possible that you are using a product from AMD (card mother or specific device) and this particular software can be a pilot allowing filters update USB ensure operation smooth and full and for a device and its properties.
   
  Please let us know if you are facing problems with the software above, to receive the appropriate troubleshooting steps.

• Hello can someone tell me what are these unwanted emails

  < image edited by host >

  Published by: Image published by host >

  It's a phishing attack. Hackers try to obtain your personal information. Send it to [email protected] , and then delete.

• Whenever I turn on my computer there is always an icon of "ready to install update" showing. What are these updates and why so many?

  "When I turn off my computer, I have an icon of" ready to install update "in the upper right of the button 'disable' located between the"stand by"and"restart"buttons. In the past, I would occasionally get one of these notices, but now they happen whenever I'm on the computer. What are these updates and why they are so common and if they pose a threat to my computer?

  Hi Michael,

  Try the following.

  Step 1: Check if there is lack of updates.

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. (If any).

  Step 2: reset Windows Update components and then install updates. Visit the following link and click on Fixit.

  How to reset the Windows Update components?

• Task Scheduler... What are these tasks and that they planned?

  Initially, MSE does scan automatically as I had planned that he... .and then there is two days, he stopped. I have switched between the options [run while you are logged in, but not using it]... and makes no diff.

  Then... I looked around and stumbled upon Task Scheduler (that I used to twist a lot during my years XP) and was stunned to see 15 tasks scheduled to run on different times and different triggers... indefinitely. I don't know any of them, and I did not had everything, or the other. I noticed that I slowed down when he was running. Then I disabled all.

  48 hours later, my PC doesn't seem different (I expect event catastrophic/s)... MSE is still running is not on calendar (which is quite ok with me, because I decided that I would really rather run it when I want).

  Question: What are these tasks and why they operate indefinitely?... .and that at the request of their? And why disabling does not seem to matter? MSE is responsible for any of them?

  BTW, registration of WMC would prevent Autostart MSE? (Because on the two failed retirements, WMC has arrived to save)

  Hi Coolnewyorker,

  Your question on "that them regular '-the answer is Microsoft.

  Scheduled tasks, include the restoration of the system, Defragmenter to Windows, Windows troubleshooting, Windows Customer Experience. You will also find tasks to check the health of your PC. It's to name a few.

  With regard to disabling them does not make any difference, you might find that not much, if anything, is actually scheduled for work when you really are on your PC. In many cases, most schedules run at about 02:00 or, in the case of everything Microsoft has planned on my machine, it does not at all simply because my system is stopped when the majority of demand is demand - or at least it used to be. Systematically, I went through them and changed the time when I was online so that information to Microsoft are downloaded - for example files that are created when the PC crashes etc.

  About MSE, as most of the applications that run on a schedule, there is a strong dependence on the PC being idle for many minutes before the start of the schedule. If you are running another program, such as WMC in record, the system is not idle, it's registration; so, Yes, WMC record could affect the operation of MSE. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  Hello

  1. don't you make changes on the computer before the show?
  2. using Internet Explorer or another third party browser on the computer?
  3. have you installed Verizon software on your new machine?
  4. what operating system you are using on the computer?

  
  If you use Internet Explorer on the computer, then you can see the steps in the link and check.

  Why is my Internet connection so slow?
  

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Also check out the link for more information.
  How to increase the speed of navigation: 7 ways to work faster on slow connections
  http://www.Microsoft.com/atwork/remotely/connections.aspx

   

• Hi, I want to export my movie on DVD clips, burning them like AVCHD, movies are made on the basis of an iphone 6 1080 p 60. I want to keep the best possible quality. Can someone tell me what that best project settings I should use? Thank you very much.

  Hi, I want to export my movie on DVD clips, burning them like AVCHD, movies are made on the basis of an iphone 6 1080 p 60. I want to keep the best possible quality. Can someone tell me what that best project settings I should use? Thank you very much.

  Johnny

  Thanks for the reply to my comments to complete Responses to your subject.

  Factors in your planning...

  First elements 13/13.1 does not support Windows XP, Windows Vista or Mac OS 10.7.

  First items 10, 11 or 12/12.1 on a Windows computer is 64-bit application when it is run on Windows 7, 8 or 8.1 64-bit computer. Otherwise, it's a 32-bit application. This has implications on important it resources, particularly for your biggest projects in Premiere Elements.

  Video mobile phone registered with a variable rate is a consideration for any version of Premiere Elements. If your cell phone video shows with audio out of sync and you use the hand brake to correct this condition, you should get good quality of the handbrake H.264.mp4 (just make sure that the export rate is comparable to that of the original in addition to changing the frequency of images to a number (use same as source) and selecting constant for this frame rate).

  If any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files to help!

  I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!

  Hi Shawnmehringer,

  Thanks for posting in the Microsoft Community.

  It would be useful that you can answer these questions to help you further.

  1. have you installed Microsoft Fixit Center on your system?

  2 are. what codec fix you referring?

  3. which files are disabled and you try to activate again?

  If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.

  Microsoft Fix it Center Forums

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• Can someone tell me what I'm doing wrong when you create a native extension for iPad? (Very detailed)

  My company is developing a game for iPhone and iPad using Flash cs5.5 and Air3.0

  The customer requires that certain features be supported - these things as GameCenter, rating, etc... which none are currently supported by flash for the iOS.

  However, they provide us with a bunch of xCode example files on how they want things to work.

  My idea was to bridge the gap in functionality by creating a native extension using the xcode source that was given to me, giving me the required functionality.

  But first, I need to truly CREATE a native extension, even just a base echo/hello everyone... I followed all the steps of various guides and tutorials and I have managed to create an ipa and put it on my iPad 2 to test, but when the program starts, nothing happens, I find myself with a black screen. When I comment on the lines of code that initialize the extension, it fires just fine.

  (and Yes, I even tried to put things in try blocks where there was a mistake - no luck)

  So I hope that someone can read through the process of what I do below and point out what I am doing wrong, or what Miss me.

  What I use:

  Mini Mac running OS x 10.7.2 - this is used to run xCode 4.1 build 4B 110

  PC - Windows 7 home 64 bit - running Flash CS5.5 (version 11.5.1.3469) with the 3.0 SDK inside AIR. I also have the sdk 3.0 air in a separate file for the command-line running. (This is my primary development platform)

  The PC has flash builder installed, but I've never really used it, and I don't know how to use it... everything that has been built to date has been done using Flash CS5.5

  So, here's what I did.

  The first thing we do is to create a library static .a on mac.

  I open xcode and create a new project.

  • Select iOS framework and library, then select "Cocoa touch static library.
  • Give it a name, in this case "EchoExtension" and put it in a folder.
  • I then delete the file EchoExtension.h as all the samples I've seen so far do not use.
  • I then add 'FlashRuntimeExtension.h' to the project of the AIR3.0 sdk frameworks folder on my PC
  • I remove everything in my folder ".m", and then, next to several different examples and tutorials, type the following code:

  //

  EchoExtension.m

  EchoExtension

  //

  #include "FlashRuntimeExtensions.h".

  Echo FREObject (FREContext ctx, void * funcData, uint32_t argc, {FREObject argv)

  return argv [0];

  }

  //----------- Extention intializer and finalizer ----------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -

  A native context instance is created

  void ContextInitializer (void * extData, const uint8_t * ctxType, FREContext ctx, uint32_t * numFunctionsToTest, const FRENamedFunction * functionsToSet) {}

  Configure the number of functions in this extention

  for ease of reference, set the number of function that will use this extension.

  int FunctionCount = 1;

  set the number of function pointer reference that will use this extention.

  * numFunctionsToTest = FunctionCount;

  create an array to store all the functions that we will use.

  FRENamedFunction * func = (FRENamedFunction *) malloc (sizeof (FRENamedFunction) * FunctionCount);

  create a table for each function entry

  Func [0] .name = (const uint8_t *) "echo"; the name of the function

  Func [0] .functionData = NULL;                    the data type

  Func [0] .function = & echo;             the reference to the real function

  Save the array to a pointer.

  * functionsToSet = func;

  }

  A native context instance is deleted

  void ContextFinalizer (FREContext ctx) {}

  return;

  }

  Initialization of each extension function

  void ExtInitializer (void * extDataToSet, ctxInitializerToSet FREContextInitializer *, FREContextFinalizer * ctxFinalizerToSet) {}

  * extDataToSet = NULL;

  * ctxInitializerToSet = & ContextInitializer;

  * ctxFinalizerToSet = & ContextFinalizer;

  }

  Called when the extension is unloaded

  void ExtFinalizer (void * extData) {}

  return;

  }

  • I'll then 'product', 'building' and it creates libEchoExtension.a
  • I'm copying this .to file on my PC.

  I am now finished with this abandoned mac of God (* shudder *)
  Back on my PC, I create a folder for my test project. For all the intentions a purposes, we will call this "D:\src\EchoExtension" then I create 2 folders, one called "lib" and one called "app". Lib, it's where I'm going to create the actionscript source for my extension.

  • In my lib folder, I create a new fla in flash cs5.5, called "EchoExtension.fla".
  • I create my lib folder, the following:
    • com\extensions\EchoExtension\EchoExtension.as
    • a folder named 'Build' in which I place my libEchoExtension.a file.
  • I have in my EchoExtension.as file, place the following code:

  package com.extensions.EchoExtension

  {

  import flash.events.EventDispatcher;

  import flash.events.IEventDispatcher;

  import flash.external.ExtensionContext;

  SerializableAttribute public class EchoExtension extends EventDispatcher

  {

  protected var _extensionContext:ExtensionContext;

  /**

  * Constructor.

  */

  public void EchoExtension()

  {

  Super();

  Initialize the extension.

  _extensionContext = ExtensionContext.createExtensionContext ("com.extensions.EchoExtension", "main");

  }

  public void echo(Prompt:String):String

  {

  Return _extensionContext.call ("echo") as String;

  }

  }

  }

  • In my main fla, on the first layer of the time line, I put just the following code to make sure that did get file included when I publish the swc.

  import com.extensions.EchoExtension.EchoExtension;

  var ext:EchoExtension = new EchoExtension();

  Stop();

  • I then opened upwards from my fla publication settings, disable the swf - which I don't need, and check the swc and ensure it generates in my generation folder.  «. "/ Build/EchoExtension.swc.
  • I also updated the player Air 3.0 (which I can do because I managed integrated AIR 3.0 along side my AIR 2.6 and can build both without any problem)
  • I then publish the swc. So far so good. No problems.
  • I then made a copy of the CFC and rename it to EchoExtension.swc.zip, how I extracted the library.swf file and place it in the folder of my generation.
  • I then create extension.xml in case of generation that contains the following code:

  " < extension xmlns =" http://ns.Adobe.com/air/extension/2.5 ">

  com.extensions.EchoExtension < id > < /ID >

  < versionNumber > 1 < / versionNumber >

  <>platforms

  < platform name 'iPhone-ARMS' = >

  < applicationDeployment >

  < nativeLibrary > libEchoExtension.a < / nativeLibrary >

  < initializer > ExtInitializer < / initializer >

  < finalizer > ExtFinalizer < / finalizer >

  < / applicationDeployment >

  < / platform >

  < / platforms >

  < / extension >

  • Now, at this point, I'm a little suspicious, because I build for the iPad2... the platform is iPhone... I thought that may be a problem and at some point I have tested the same build on the iPhone4 and had the same results. I also tested using the name of the platform of the iPad-ARM and got the same results... So I don't think that's the problem, but I'm not sure.
  • Now, to make things easier, I created a batch file called "buildane.bat" in my file generation. That's what I use to create my .ane file and it contains the following command line:

  D:\SDKs\AirSDK30\bin\adt-Paquet - target ane EchoExtension.ane extension.xml - CFC EchoExtension.swc - iPhone-ARM library.swf libEchoExtension.a platform

  • I then open a command prompt and run buildane.bat and Ottoman. My donkey is created. My generation file now has the following files in it:
    • buildane.bat
    • EchoExtension.ane
    • EchoExtension.swc
    • EchoExtension.swc.zip
    • extension. XML
    • libEchoExtension.a
    • Library.swf

  Now that I have my swc, donkey and it's time to create my sample application that will be used to test my new extension.

  • I go back to my D:\src\EchoExtension folder and go to the folder app ealier, I created.
  • I then create a new flash project called EchoExtensionTester.fla
  • I open the action script settings, paths to library and add the CFC I created in my D:\src\EchoExtension\lib\build file to my project.
  • On my stage, I create a field called text txtInput, a field of dynamic text named txtEcho, and a couple of buttons called btnClear, btnRuntime and btnEcho
  • I open the first layer of the timeline, and place the following code:

  imports of base.

  import flash.desktop.NativeApplication;

  import flash.events.MouseEvent;

  import flash.text.TextField;

  import the extension of our swc.

  import com.extensions.EchoExtension.EchoExtension;

  the value of our input text to the need the softkeyboard field

  txtInput.needsSoftKeyboard = true;

  Add event handlers to our buttons.

  btnEcho.addEventListener (MouseEvent.CLICK, btnEcho_Click);

  btnClear.addEventListener (MouseEvent.CLICK, btnClear_Click);

  btnRunTime.addEventListener (MouseEvent.CLICK, btnRunTime_Click);

  create our variable expansion.

  var ext:EchoExtension;

  Try

  {

  initialize our extension of echo.

  Ext = new EchoExtension();

  } catch (error) {}

  txtEcho.text = 'Error when trying to create new EchoExtension:\n\n' + e;

  }

  Stop();

  Delete the text echo field

  function btnClear_Click(e:MouseEvent):void

  {

  txtEcho.text = "";

  }

  just to test, put the latest version of the air runtime in our text field, so we can make sure we run air 3.0

  function btnRunTime_Click(e:MouseEvent):void

  {

  txtEcho.text += "\nRuntime version =" + NativeApplication.nativeApplication.runtimeVersion; ".

  }

  call the extension, passing all that is in the text input field and get back and place it in our text echo field

  function btnEcho_Click(e:MouseEvent):void

  {

  txtEcho.text += "\n";

  Try

  {

  txtEcho.text += ext.echo (txtInput.text);

  } catch (error) {}

  txtEcho.text += "\nError call ext.echo:"+ e;»

  }

  }

  • I save the project, Open Air for the parameters of the iOS, then perform the following settings: (Yes, I know... I'll have to use adt to perform the build, but I need to first create the swf file)
    • File: EchoExtensionTester.ipa
    • AppName: EchoExtensionTester
    • Version 1.0
    • Landscape
    • Full screen on
    • Auto orientation is disabled
    • GPU rendering
    • device: iPad and iPhone
    • RES: high
    • Deployment: I use my certificate and profile provisionging that I use for my main project (that works) and defined for the test of the device.
  • I close the window and save again... but before I publish, I opened newly created "EchoExtensionTester - app.xml" which is located in my app folder.
  • I add the extensions <>< extensionID > com.extensions.EchoExtension < / extensionID > < / extensions > to the XML in the file so now it looks like this:

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < application xmlns =" http://ns.Adobe.com/air/application/3.0 ">

  <>Extensions

  < extensionID > com.extensions.EchoExtension < / extensionID >

  < / extensions >

  < id > EchoExtensionTester < /ID >

  < versionNumber > 1.0 < / versionNumber >

  < file_name > EchoExtensionTester < / name of the file >

  < description / >

  <!-to locate the description, use the following format for the description element. < description > < text XML: lang = "fr" > App English description goes here < / text > < text XML: lang = "fr" > French App description goes here < / text > < XML text: lang = "ja" > Japanese App description goes here < / text > < / description >->

  < name > EchoExtensionTester < / name >

  <!-to locate the name, use the following format for the name element. < name > < text XML: lang = "fr" > insert here the name App English < / text > < text XML: lang = "fr" > insert here the French App name < / text > < XML text: lang = "ja" > insert here the Japanese App name < / text > < / name >->

  < copyright / >

  < initialWindow >

  < content > EchoExtensionTester.swf < / content >

  standard < systemChrome > < / systemChrome >

  < clear > false < / transparent >

  < visible > true < / visible >

  true < fullscreen > < / full screen >

  landscape of < aspectRatio > < / aspectRatio >

  GPU < renderMode > < / renderMode >

  < maximizable > true < / maximizable >

  < minimizable > true < / minimizable >

  < resizable > true < / resizable >

  < autoOrients > false < / autoOrients >

  < / initialWindow >

  < icon / >

  < customUpdateUI > false < / customUpdateUI >

  < allowBrowserInvocation > false < / allowBrowserInvocation >

  < iPhone >

  < InfoAdditions >

  <! [CDATA [< key > UIDeviceFamily < / key > < table > < String > 1 < / string > < string > 2 < / string > < / array >]] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  < / application >

  • I save the changes to the xml file and return to Flash. I then publish.
  • The swf file is created as it should be, but then I get the error message:

  Error creating files.

  A native implementation extension 'com.extensions.EchoExtension' required by the application is not found for the target platform.

  • Now, while it is a pain in the rear, I again, this was going to happen because in my reading tutorials and samples, they have all said that you use adt to build the ipa... but that is fine... all I wanted anyway, was the swf, which I now have in my app folder.
  • I close flash because I no longer need and I create a new batch file: (Note: I have change the name of the cert, profile and password for this post)

  CLS

  "D:\SDKs\AirSDK30\bin\adt" - package - target the ipa-ad-hoc - stores pkcs12 - keystore "D:\src\mycert.p12" - storepass MYPASSWORD-putting into service-profile "D:\src\myprovfile.mobileprovision" "EchoExtensionTester.ipa" "EchoExtensionTester - app.xml" "EchoExtensionTester.swf" - extdir... / lib/Build

  Set dummy = p

  ECHO done

  • I then open a command window in my app folder and run build.bat.
  • I wait about 2 minutes...
  • ...
  • ...
  • YAY! My ipa file was created without error reported so far... Time to copy this bad boy to the iPad and see what happens.
  • I opened iTunes, drag "EchoExtensionTester.ipa" to the applications, then synchronize my device...
  • ...
  • YAY! iTunes installed ipa on the device... and there is a white icon bright and shiney for Echo Extension tester...
  • I open the app... and...
  • nothing.
  • I'm waiting for
  • still nothing.
  • I go to the bathroom.
  • I'll be back... still nothing... just a black screen.
  • I press the home button on the iPad, the app minimized, I restore it... nothing... black screen.

  management of human resources. Time to do some trial and error to see if I can figure out what the distribution.

  • As a test, I opened my fla and I comment out the following lines:
    • Ext = new EchoExtension();
    • txtEcho.text += ext.echo (txtInput.text);
  • I then rebuild the swf... get the same error (don't care)... I then rebuild the ipa using the batch file... and reinstall it on the device when it is made.
  • Exactly the same thing...
  • I opened the xml file... and remove the < extensionID > com.extensions.EchoExtension < / extensionID > line, save and re - run the batch file again... Wait for the ipa ends, then run it on the device.
  • I start the program on the iPad and it starts perfectly... with the exception of the commented line of code actually create and call the extension, everything works as it should. The runtime on the device reports as 3.0.0.4080
  • A test, I opened the .fla save and uncomment the 2 lines, I commented out above... keep the xml file extensionID, I re - publish the ipa... of course, this time, it actually creates the flash API, because the id of the extension is not in the xml file.
  • I put the file API with the extension in place on the ipad code... The fire and make the txtInput text and press the button of the echo. I get the following error:
    • Error calling ext.echo: TypeError: Error #1009
  • I suspect it's because I failed to include the extension in the descriptor... but when I build it with the extensionid in the xml file, I just get a black screen. I'm 99% sure that the context of the extension in the ext object is null (because that's what happens when I run Flash debug without extension lines in the xml)

  And here I am stuck.

  Can someone tell me what I am doing wrong or what I forgot to do?

  Thank you.

  Hi can check you if the CFC of the native extension is linked as external?

  Next image can help locate and change the link type of CFC.

  

  The issue that many people face here (i.e. extension works fast/interpreter mode and only when they are packed in standard mode) occurs only when the SWC of the NE is not linked externally.

  I hope this helps.

  Kind regards

  Mathyas blabla

  IOS of the AIR

• Can someone tell me what is the difference between a default playback device and a default communication device?

  original title: sound settings are very complex. Can someone tell me what is the difference between a default playback device and a default communication device?

  In fact, I use the recording software to record songs instead of downloading. Some recorders record their own drivers and they work fine. But sometimes, they do not respond. The DD Realtek Audio Manager is sick with something. People suffer a lot using this. My questions are endless. Some of them are:

  • What is "Realtek Digital Output?
  • Save devices-part of sound cards?
  • What are animals like 'Audio CD' and 'Stereo Mix' displayed on the DD Realtek Audio Manager?

  I'm sorry for not being specific, but I need a very good idea of how to deal with the settings of the sound in windows 7. And one thing, I have no microphone plugged but always Realtek HD Audio Manager detects? Why?

  Hi SandiKollol,

  A communication device can mean different things, but mostly it is used to allow voice communications on the internet.

  A playback device plays his return, such as your speakers or headphones.

  I hope this helps.

• Can someone tell me what it is? If you want a frame announcement to your image, it is error to come: line: 600-&gt; if (win.panels [pI] [mid] .menu. var1.enabled == enable)

  Can someone tell me what it is? If you want a frame announcement to your image, it is error to come: line: 600-> if (win.panels [pI] [mid] .menu. var1.enabled == enable)

  Concerning

  Johahoussein n

  Hi houssein

  What version of Photoshop are you using?

  See if this thread can help you 21 error under filter/rendering/image

  Concerning

  ~ Assani

• Can someone tell me what file hosting imac needs moding/etc. to validate the edition number. Lightroom 6

  Can someone tell me what file hosting imac needs moding/etc. to validate the edition number. Lightroom 6

  Log in as an administrator to change the hosts file in Mac OS.

  In a window of Finder, select go > go to folder.

  Type/etc

  Select the hosts file and open it with a text editor.

  Save the hosts file: Choose file > save as, save the file as hosts.backup, and then click OK.

  Look for the original hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and remove these entries.

  Save and close to overwrite the file.

• I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

  I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

  Click on your name here: Greenfox

  I still see a lot of old debates on your part - AJ

• Can someone tell me what is happening with my Satellite A30?

  Can someone tell me what is the problem with my computer laptop satellite A30 514 is? The problem is that my laptop is very easy get hot and the fan never stop turning after 15 minutes and I continue to use the laptop about 1 hour, I guess that the laptop GET overheat auto power off.
  Help me to know what is the problem.
  Thank you.

  HI Yves,

  It sounds like overheating to me. This is usually caused by a build-up of dust in the cPU-heatsink which keeps air from cooling fans to pass through. You can try to use a hose of vacuum cleaner against the bars of suction air suction debris.

  Kind regards

• my iPhone 6 more the camera back suddenly blurry when I took photos. can someone tell me what to do?

  my iPhone 6 more the camera back suddenly blurry when I took photos. can someone tell me what to do?

  Check your serial number here: https://www.apple.com/support/iphone6plus-isightcamera/

  -AJ