OfficeJet 6835 e-all-in-one: by default copies the value 2?

Similar Questions

• HP Officejet 4500 Wireless all-in-One impossible to install the software

  Scan feature did not work. I use a 64 bit of Windows Dell 8.1 System. Troubleshooting said I had to download the full software. I downloaded from HP as shown with success. I uninstalled the old software HP, then restarted the computer. Then I tried to install the new full features software downloaded. The installation wizard appears, and the software files are checked. The software tries to find my device and soon comes up with a message saying that I need to download the full features software (again, that I am in a loop). Now I can't print because I uninstalled the software I used before I tried to fix the scan.  Help, please.

  Hello lstoneham,

  Welcome to the HP Forums.

  I see that you have a problem with the installation of the printer to your computer Windows 8.1.

  I have a few steps we can try to solve this problem of troubleshooting.

  I'll give you a series of documents and tools to use to remove the old software and drivers as well as the updated software and drivers via a download.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If you have the printer connected to the computer with a usb cable, please remove the USB from the printer and the computer and leave it disconnected until further notice.

  The first link, I will give you is for HP Officejet software and driver removal utility.  Please save the file to your desktop as it creates it's own icon.  It will be easy to find when the download is complete.  Double-click the new icon and follow the instructions.

  Once the uninstall is complete, reboot the computer.

  When the computer is powered on, please go and disable the firewall or anti anti-virus until the relocation is complete.

  The next step, we are going to do is download and register HP Officejet full feature and driver software on the desktop.  This will still create it's own icon.

  Double-click the new icon and follow the instructions for installation.  The installation will prompt you as to connect the usb cable (if this is the type of connection you want us) so please do not connect before hand.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem

• HP Officejet 4630 e-all-in-one: my password has the '=' character and it is not available in the keyboard options.

  I can not set the printer wireless because of the password issue (not ' =' on the keyboard). I also can't configure wired, because the ethernet cable may not be connected to the printer (as suggested on the web).

  Is there another way to use this printer?

  I had no problem before when my network used different network name and password. Given that the password has been changed, my printer is dead.

  Thank you

  Marija

  Hello

  The printer has a USB port, it's the lower left port just below the ports of the two phones.

  You would need a USB 2.0 for the printer, the printer connector is different from the one connected to the PC, t is the connector marked as B in the following image:

  

  Kind regards

  Shlomi

• I have an officejet pro L7580 all in one that I lost the cd and downloaded the full software.still didn't work?

  I have a new PC, windows 7 Pavilion p6000 series, but it says that my printer is compatible? I lost the installation cd of it he went then to the downloaded HP full version Web site, I see in my documents but do not know how to run or open properly. What I am doing wrong? I must say how disaponted with HP, I am because of him misleading communication error/problems and now they did not treat the 39.99 to guarantee of my printer and now say at the end? Can someone help me get my printer doesn't work, I really appreceite it. Thank you & God Bless

  Hello

  All the drivers are in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=2512008#N201

  As you already downloaded it, simply install them like install a program (double click or run as administrator).

  Kind regards.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• Printing error 0 x 00000709 when I try to make my new HP Officejet e-all-in-one printer default

  Print 0 printer error x 00000709 when I try to make my new HP Officejet e-all-in-one printer default.  I removed the old printer, uninstalled it, theinstalled HP Officejet (former was an HP Photosmart all-in-one).  I rebooted, everything I can think of.  I spent hours (overnight) through countless services for troubleshooting.  Can someone help me please?  Need of college courses

  . From Internet Explorer

  Original title: error printer print 0 x 00000709

  Hi PattiVan,

  It seems that you can not set HP Officejet 4620 as default printer, you get the error message: 0 x 00000709.
  
  What is a local printer or network printer?
   
  We will try the following methods and check if they helps us to solve the problem.

  Method 1: Try to change the default printer value in the registry key and check if it helps.
  

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  (a) click Start.

  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.
  
  Method 2: Try the steps from the link.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3: Let's connect on another user account and check if you can configure the printer as the default printer.

  If it works in a different user account, then the user account is damaged.

  
  

  Refer to this link and create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• I pressed the reset button default values during the installation on Officejet 4620 navigation all in one.

  I pressed the reset button default values during the installation on Officejet 4620 navigation all in one, now I can't connect to my wireless network. My router is a box of phone company that I do not have access to. Any help?

  Oh, sorry.  Make sure the USB cable is NOT connected when you run the software or it will assume that you want a USB installation.  It will ask you which type of installation desired and, of course, choose wireless.

  Later you will be asked to plug a USB cable.  Wait until he asked.

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.