Can't access mailserver when the LAN!

Similar Questions

• Can't access google when the computer is started to the top

  I get a page that covers the entire screen which is red and won't let me see the google search box

  I sent a response which says that it has been corrected, but when I turned off the computer and restarted the screen was covered with the same red box.
  There is a box that appears saying compatible Audit Add ons, but it goes and comes very quickly, with nothing to stop it or click it.
  Help
  Mike

  Try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

• QuickVPN connected, but I can't do anything on the LAN ping

  Hi all

  I try to use QuickVPN to connect to my corporate network. Yesterday I was to the point where QuickVPN actually connected and I could connect to the router from inside IP. But I can't see, or ping all computers on the LAN to company. Manual of the router says '' customer QuickVPN may access only the default LAN hosts. ''. Are the computers of the default of the company LAN LAN hosts?

  I added the router (RV220W) to the existing company LAN to test QuickVPN. The company LAN has a Small Business Server as a DHCP server and another router as the default gateway. The company LAN the subnet 192.168.1.0/24*, the cisco wan router has the subnet 192.168.103.0/24 and my VPN client is connected to a hotspot wifi with the same wan and LAN 192.168.3.0/24. The LAN of the cisco router address is 192.168.1.1.

  * I know now, 192.168.1.0/24 is the worst possible choice for a net business, but I didn't when I installed the Small Business Server. I'll try to change it to something like 10.123.45.0/24 later.

  Thanks in advance
  Mike

  

  Hello

  You can reach a PC in the LAN of RV220, because the default gateway is not RV220.

  This is what happens: the PC with fast VPN (for example IP: 192.168.103.10) is ping a PC with IP 192.168.1.10, via the VPN tunnel. Once the request arrives at the 192.168.1.10 PC, this PC sends the response to its default gateway (because don't have a direct connection to the 192.168.103.X network). If the default gateway is RV220, he'll know that the response should be returned via the VPN tunnel to the customer, but if it's another machine, it will just drop the package.

  In this case this another router (default gateway) must be configured with a static route, saying that subnet 192.168.103.x has as default gateway - 192.168.1.1 (RV220).

  As long as the IP address of the VPN machine fast is the same, it's ok. But if you move this PC to another local network, you will have again the problem.

  So if you plan to change the LAN IP of the fast VPN machine, I recommend using instead the Shrew VPN, where you can configure virtual IP on the client, that does not need to change.

  Kind regards

  Bismuth

• My school (Washington State University - site Angel) appears as "Untrusted" and I can't access any of the content, how do I get around this?

  I get an error "this connection is untrusted" when I connect to the website of my school and therefore can not access all of the content, that I need for my class. It is a new problem, I just had to reinstall Mozilla when I upgraded my hard drive, it worked two days ago, but not today. Does anyone know why this would happen, or how I can get around this? The only option that is imparted to me is of ' get out me of here! "which is the exact opposite of what I need to do.

  Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  Find out why the site is not approved, then click on "Technical Details to expand this section.
  If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

  You can see more details like the intermediate certificates that are used in the details pane.

  If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

  Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.

• can't access itunes on the laptop. the display shows "the"itunes"folder is a locked disk or you don't have permission in writing for this folder.

  can't access itunes from the laptop.

  Hello

  • Have you been able to access this file before?
  • What were the changes made before the issue occur?
  • Does happen with Itunes only?
  You can check this link:
  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders
   
  You can also try to access itunes through c:\program files and the itunes folder and check.

• Sometimes, without apparent reason, I can't access one of the tiles on my desk.

  * Original title: using Windows 8

  Sometimes, without apparent reason, I can't access one of the tiles on my desk. The tiles will work initially, I can go on Chrome or word, etc. or access any tile on my desk, but then without apparent reason, that it stop and I won't be able to access any more tiles. By clicking on them, doesn't matter.  Similarly I can't log in, unless I press CTRL + ALT + DELETE and then go on logout. But I can't connect the regular channel. Another problem is that if I try to go on my documents, I get a message saying "cannot open this file". It says that the file being deleted or moved, and then the small downstairs for my documents icon disappears. If I turn my computer and turn it back resets itself and I will be able to use the tiles on the desktop and access my documents, etc. But then after a while for no apparent reason it happens again, and I won't be able to access the tiles on the desktop, etc..

  Sorry, if this is insane, or if I'm missing something really obvious here. I probably didn't explain the issue very well and I don't know that much about computers. But it is obviously a question and I was wondering if there was a way to solve this problem.  Thank you.

  (Moved from files, folders and online storage)

  Hello

  See if this helps you improve performance to stop the new power switch again problems.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• My phone does not light and I need pictures that are saved to this topic. I can't access it using the computer what can I do?

  My phone is a Nokia N95 and he simply ceased to work recently, no idea why, but I have important pictures saved on the phone that I can't access because of the phone is not not on computer do not recognize the connection. Is there a way I can get these pics off my phone? I am really in need here and just reach out for information or ideas anyone may have regarding my dilemma.

  Hi cindyheeremans,

  Unless your phone is turned ON, you will not be able to access photos from the phone. I suggest you to contact Nokia for more support.

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection.

  Original title: Weird problem.

  My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?

  Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it.  At this point, I suspect something mischievous because restoration of return must be a guaranteed fix.  If it worked on Friday, it should work if restore you backup on Friday.

  I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.

  Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).

  I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.

• I've transferred my CS 6 to a new computer applications and now can't access Illustrator, only the trial version of the creative cloud. How can I access to software that I own?

  I bought a new Mac Pro, transferred my CS software on it from my old Mac Pro, now I can't access Illustrator, only the version of cloud of the trial. How can I use the software that I already bought?

  Just to clarify, in the case where this help anyone. I transferred more SC around 6 to help Apple migration assistant, and the only program in the suite that could not be accessed except through the trial version of cloud was the Illustrator. After that more than an hour on the Adobe support chat, turns out that I needed to follow the guests to buy cloud version, then type the serial number of my CS software at some point in the process. There you go.

• No lights when the LAN cable is connected by Satellite A30-141

  I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

  any help would be much appreciated

  Hello

  I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

  In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

• After Anyconnect I can't access to asa and LAN

  Dear all,

  My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?

  Office 192.168.10.0/24

  192.168.11.0/24 VPN

  How can I solve this problem?

  ASA Version 9.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XXXXXXXXXX
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd encrypted XXXXXXXXXX
  names of
  192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP address 192.168.10.254 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
  !
  boot system Disk0: / asa923 - k8.bin
  passive FTP mode
  clock timezone 8 HKST
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Name-Server 8.8.8.8
  Server name 8.8.4.4
  permit same-security-traffic intra-interface
  network of the VPN_Pool object
  subnet 192.168.11.0 255.255.255.240
  network of the NETWORK_OBJ_192.168.10.0_24 object
  192.168.10.0 subnet 255.255.255.0
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm-731 - 101.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  interface NAT (outside, outside) dynamic source VPN_Pool
  NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
  !
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Activate Server http XXXXX
  http 192.168.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  Terminal registration
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint Anyconnect_Self_Signed_Cert
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  name of the object CN = 115.160.145.114, CN = ciscoasa
  Configure CRL
  trustpool crypto ca policy
  string encryption ca Anyconnect_Self_Signed_Cert certificates
  certificate 5c7d4156
  308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
  0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
  09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
  5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
  636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
  0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
  af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
  78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
  454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
  60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
  4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
  d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
  ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
  8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
  03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
  2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
  772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
  affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
  c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
  be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
  5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
  2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
  597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 5d7d4156
  308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
  05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
  130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
  73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
  3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
  18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
  864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
  01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
  a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
  050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
  b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
  d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
  c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
  f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
  bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
  0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
  05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
  45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
  052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
  a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
  7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
  a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
  74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
  d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
  364bc8ba 4543297a a17735a0
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign

  dhcpd 192.168.10.254 dns 8.8.8.8
  dhcpd rental 43200
  !
  dhcpd address 192.168.10.1 - 192.168.10.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP AAA server. BBB. CCC. Source DDD outside prefer
  SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
  AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  internal DefaultRAGroup_2 group strategy
  attributes of Group Policy DefaultRAGroup_2
  DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
  Ikev2 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  internal GroupPolicy_Anyconnect group strategy
  attributes of Group Policy GroupPolicy_Anyconnect
  WINS server no
  value of server DNS 8.8.8.8 8.8.4.4
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  Split-tunnel-policy tunnelall
  IPv6-split-tunnel-policy excludespecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
  by default no
  activate dns split-tunnel-all
  IPv6 address pools no
  WebVPN
  AnyConnect value Anyconnect_client_profile type user profiles
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  attributes of username XXXXXXX
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  attributes global-tunnel-group DefaultRAGroup
  address pool VPN-pool
  Group Policy - by default-DefaultRAGroup_2
  IPSec-attributes tunnel-group DefaultRAGroup
  IKEv1 pre-shared key XXXXXXXXX
  tunnel-group DefaultRAGroup ppp-attributes
  ms-chap-v2 authentication
  tunnel-group Anyconnect type remote access
  tunnel-group Anyconnect General attributes
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_Anyconnect
  NAT - to-public-ip assigned inside
  tunnel-group Anyconnect webvpn-attributes
  enable Anyconnect group-alias
  tunnel-group Anyconnect ppp-attributes
  ms-chap-v2 authentication
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  service-policy-international policy global
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:24991680b66624113beb31d230c593bb
  : end

  Hi cwhlaw2009,

  You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

  It may be useful

  -Randy-

• BlackBerry Smartphones I changed my password for the computer, no I can't access it from the phone

  Please, can someone help me? I changed my password of e-mail of the PC, and now I can't access my BB. When I enter the "E-mail accounts" menu in the phone, I have two categories here: BIS and BES (I have a simple number, not a business Edition), and I can't access the BIS category, it is inactive. I can access only BES, but I don't need. Can someone help me?...

  Hello

  Please give iansantos a break here... Somewhere, I think that they don't speak ROMANIAN or know that little question - this is new to me too... but thank you for sharing this to others volunteers and participants in this community to find.

  Instead, what he interpreted (and, indeed I agree) of your original message was that you had to edit your stored inside the BIS, email existing credentials (once you have changed the to your mail server). And, there are several ways to do this, with the method you registered as being just one of them... so there thought your goal as being to get BIS re-configured with your new email credentials and you provided another method to do this.

  Now, with your 2nd post, are better understood what was your original desire, we now know that our interpretation of your original goal was wrong. But, once again, give iansantos a break... like you, he's human.

  Good luck!

• Apple Watch 2 cannot access Siri when the phone is charging

  My iPhone is plugged in my Apple Watch says that it cannot connect to Siri 6 simple feet further. Has anyone else experienced this problem and/or been able to solve it?

  Hello

  The following steps may help:

  • On your iPhone, go to: settings > Siri - disable, pause for a few moments, and then reactivate the Siri.
  • If it does not immediately help, then restart both devices.
    • The two put together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • If the problem persists, then disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

  Hi all
  I have a laptop Toshiba Equium A60 which now extends for less than a year.
  I am running WinXp Sp2

  Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

  I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

  Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

  It works well in Safe mode and doesn't crash.

  I updated the driver but and it's always the same.

  I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

  When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

  This could be a problem with my cable?
  Help, please... Any ideas?

  Thank you for the charges,
  Shay

  Hello

  If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.