Can't burn CD in Windows 7 on WMP

Similar Questions

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Can not burn CD using window Explorer - I used to be able to! Dell XPS410 Windows XP

  I'm used to be able to burn files on CD - W and CD - RW using Windows Explorer.  Now, I can't.

  If I try to use Roxio Creator-Dell Edition to write files to a CD then I get the following error message:

  Waiting for device.

  Device of my being disconnected or can be used by another program

  Any ideas on where I should start?

  Any help would be appreciated!

  
  

• Media Player - can't burn DVDs its request to connect a burner?

  I can't burn DVDs of windows media player to drive in the drive, it says to connect a burner and restart?

  If you create a DVD for data backup purposes the following
  Freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://CDBurnerXP.se/

  (It's a free app
  to burn CDs and DVDs)

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

  If you create a video DVD to play in a free-standing DVD
  Player of the following freeware may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Good luck...

• When you use Windows Movie Maker, I can only burn a CD when I want to burn a DVD, why I can't burn a DVD Slideshow?

  I have pictures saved on my hard drive and I want to burn a DVD, but Microsoft Movie Maker will only burn to a CD.  How can I burn to a DVD?  I was told that it is possible.

  The only version of Windows XP that has a DVD option in Movie Maker
  is the "Windows XP Media Center Edition 2005"...

  If you want to burn a video DVD that will play in a free-standing DVD
  Drive on an XP system, you need DVD Authoring software.

  There are many choices in retail, but to get started the following freeware
  may be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.Digital-Digest.com/software/download.php?sid=1246&SSID=0&did=2
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  If you decide to go on the road to detail... This article may
  be useful: he compares 15 of the most popular applications.

  Best video 2011, magazine publishing and software comparisons
  http://video-editing-software-review.TopTenReviews.com/

  Good luck.

• How can I burn a cd from the windows cd burner?

  I found the files to the cd burner.  How can I burn from there on a disc?

  How to copy information to a CD in Windows XP

• Is there a way to convert a PowerPoint Windows so it can be burned to a DVD and play on a DVD player?

  I would like to convert a PowerPoint with the sound it can be burned onto a DVD that will play on a TV/DVD player.

  I would like to convert a PowerPoint with the sound it can be burned onto a DVD that will play on a TV/DVD player.

  ===================================
  The following article was written for Movie Maker 2 on
  XP, but maybe it gives you some useful suggestions.
   
  Movie Maker 2-
  Import Power Point presentations
  http://www.Papajohn.org/mm2-importing-PowerPoint.html

  Once you have converted to a video file .wmv... you can
  Windows DVD Maker to create a DVD-video.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• my laptop stop save my movies for windows and I can't burn a dvd eithier

  my laptop stop save my movies for windows and I can't burn a dvd eithier

  Hi handyman6810,

  Can you give us more details about your film, about saving?

  For your problem of DVD burning, you can also take a look at the article with information here.

  Thank you!

• I can't burn a CD with Windows Media Player.

  I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player.  My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc.  The same thing happens with itunes.  I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it.  I burned the disks before using Windows Media Player.    Help?

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I burn mp3 to a cd in windows media player

  How can I burn mp3 to a cd in windows media player

  How can I burn mp3 to a cd in windows media player

  ================================================
  If you want to burn a CD with MP3s instead of an Audio CD (music)
  you need to create a data CD. The following article explains how to:

  Windows Vista-
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  (Expand the following section: "Burn a data CD or data DVD")

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can I burn a dvd 2.3:1 using windows dvd create? __

  can I burn a dvd 2.3:1 using windows dvd create?

  I don't see how to make 16:9 and 4:3. If I had a divx file that was 2.3:1 How could I burn and keep proportions?

  Hi snmkelley,

  Windows DVD maker cannot accommodate proportions 16.9 and 4.3.

  For more information please visit the link below.

  http://blogs.msdn.com/deanro/archive/2006/11/14/Windows-DVD-Maker-and-aspect-ratios.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can't burn the CD to iTunes 9.1 on Windows 7

  I can't burn a CD from my library of iTunes songs.  When I try, I get a dialog box 'the drive to record not found '.  I also received a message that says "registry settings used by iTunes for the importers pilots and burning CDs and DVDs or missing (However, I can import songs into iTunes from a CD, but just can't burn it to a CD.).  Please reinstall iTunes.  When I run the Diagnostics CD Drive Test iTunes it says it's 'no disk in the lower filters, no disc in the upper filters '.  I am able to burn CDs with Windows Media Player, so I think the problem is with iTunes and not my computer.

  I re-downloaded iTunes several times, but this has not cured the problem. Now I would try to uninstall iTunes and then reinstalling iTunes... but I'm afraid that I might lose all my itunes Store purchased music if I uninstall itunes.  Am I wrong?

  Help!  Thank you.

  John Healey

  Hey John,

  GEAR licenses this is CD/DVD recording 'engine' for Apple computers for use in iTunes for Windows. This recording 'engine' is the code of the software which adds disk recording cababilities to their product.

  If you encounter registration problems, they can be linked to drivers GEAR being damaged or improperly installed. You can download the latest drivers of VEHICLES or better yet, make sure they are installed correctly. The following control for Windows x 86 guide/list will help you determine if they are installed correctly. In the first test, make sure that C:\windows\system32\gearaspi.dll is in the Windows\System32 directory. Simply copy and paste the driver in the Windows\system32 directory.

  To check that all drivers of GEARAspi is installed correctly please check the following points:

  On 32-bit systems, make sure that:

  * C:\windows\system32\gearaspi.dll is located in the Windows\System32 directory
  * GearAspiWDM.sys is located in the Windows\System32\Drivers directory

  On 64 - bit systems, verify that:

  * C:\windows\system32\gearaspi.dll (32-bit version) is in the Window\SysWOW64 directory
  * GEARAspi64.dll (64-bit version) is located in the Windows\System32 directory
  * GearAspiWDM.sys (64-bit version) is located in the Windows\System32\Drivers directory
   
  Next:

  In the Device Manager (Manager button on the Hardware tab in the Start Menu |) Settings | Control Panel | System) double click on DVD/CD-ROM drive drives entry. Double click on one of the listed CD/DVD recorders and go to the tab drivers press the Details of drivers and make sure GEARAspiWDM.sys is listed in the driver files and the digital signer is Microsoft Windows hardware compatibility. On the Details tab, select the upper filters of class of the pull down and make sure that GEARAspiWDM is listed.
   
  In system information (type msinfo32.exe in Start Menu |) Run...) Verify that there is an entry called gearaspiwdm in software environment. System drivers. The status of the driver should be OK, and it should be started.

  For your information:

  iTunes for Windows Vista or Windows 7: CD troubleshooting problems caused by device filters

  http://support.Apple.com/kb/HT2615

  Kind regards

  Savan - Microsoft technical support.

• I use Windows Live DVD Maker to create DVD movies to play on regular DVD players. But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  Projects of direct burning on Blu Ray?

  I use Windows Live DVD Maker to create DVD movies to play on regular DVD players.  But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

  I think that you need a more powerful software. A Google search for:
  "Blu - Ray Authoring Software" could be a place to start.

• How can I burn an ISO 9660 format disc in windows 7 &#62;

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  ========================================
  The free ImgBurn is perhaps what you are looking for.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (works on XP, Vista, 7) (to download... left click on the green)
  spot with the white arrow: "Click here to download")
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  Also... See the following screenshot:

  Find the 9660 option
  http://i47.Tinypic.com/2qiradw.jpg

  ImgBurn - create the file image from files/folders
  http://grok.LSU.edu/article.aspx?articleid=15771

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61