can't burn the CD w / WinMediaPlayer 11 more?

Similar Questions

• HP laptop Pavilion 14: Can't burn the disc

  Since the time, my burning device stop working. The only thing he can do is play CDs and DVDs, but I can't burn anything. I did a diag test. Here are the results:

  Failure ID: RLPB3T-74087MFPV61-6HPV03

  Product ID: F4G87LA #ABM

  Hi KennAyala,

  If you can read CD/DVD is not the player. Here is a link that might help.

  What kind of CD are you using to try to burn and what is the content of the documents that you want to burn?

  Let me know.

  Thank you.

• Satellite L500D - can only burn the recovery of 1st and 2nd disc

  I bought this 2nd hand computer laptop in the last two days with the factory default reset. However, I could only burn the 1st recovery disc 2 of 4 using Toshiba Recovery Disc Creator.

  I am running Vista Home Premium SP2 32-bit. I started at F8 factory reset "out of the box" settings that went well. I did where there was a small problem when the previous owner restored to factory settings.

  As he had SP1, I installed SP2. I upgraded the BIOS to 1.1 to 1.4, the latest. I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  Downloads from http://www.mytoshiba.com.au/support/notebooks/satellite/l500/pslk0a-00r009/download.

  I changed to another brand of DVD blank. I have checked and unchecked "Verify" in the Recovery Disc Creator. I also have the latest installed version of the Toshiba disc Creator software. I tried to burn discs 3 & 4 separately overall

  I get no error message, just as the taskbar progress 3rd disc ends never quite at the end. The former owner has never created a set of the factory restore disks. Any thoughts would be appreciated.

  Hello

  to be honest, I have not idea why t he does not burn it. I can offer you:

  1. use a high quality like Dvd - R verbatim media

  > I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  2 maybe, he won't burn with Toshiba disc creator software update. Restore back factory settings and try again with the old version of Toshiba disc creator.

• Can not burn the backup of the data on a DVD - RW on the Satellite A100-200

  Hello

  I did a lot of audio and data cd using Nero burning, but can not burn a dvr - rw data backup.

  Advice please.

  Satellite A100-200 and xp home

  What do you mean with data backup?
  And have you tried other DVD discs? I think your drive is compatible with the player so test drive of other manufacturers.

  On the Toshiba laptop I always use verbatim, and I never had any problems with it.

• I moved some files on a CD. Didn't burn the CD and I can't find the files on my computer more.

  original title: lost files

  I've marked a few files, then moved them to a cd.  The cd has no record and I can't find them on my hard drive more.  Help?

  Hello

  · What software did you use to burn the CD?

  · Did you receive an error message or error code when you tried to burn the CD?

  · Looking for files by the name and the location where you saved them?

  Try to search the files of the application preferences, you can check the link for the procedure below: to search for a file or a folder: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/find_c_search_where.mspx?mfr=true

• I can not burn the file on a dvd

  I want to save through recovery norton computer and put it on the record. Click on burn, but nothing happens

  Hello

  1. What is the format of the file you are trying to burn?
  2. don't you make changes on the computer before the show?
  3. you receive an error message?
  4. you try to burn using any third-party program?
  You can check the link to burn the files to DVD.
  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
  
  For the problem with the Norton recovery tool, you may need to contact Norton support.
  See the link for help.
  http://www.Symantec.com/Norton/support/index.jsp

• can't burn the CD to iTunes 9.1 on Windows 7

  I can't burn a CD from my library of iTunes songs.  When I try, I get a dialog box 'the drive to record not found '.  I also received a message that says "registry settings used by iTunes for the importers pilots and burning CDs and DVDs or missing (However, I can import songs into iTunes from a CD, but just can't burn it to a CD.).  Please reinstall iTunes.  When I run the Diagnostics CD Drive Test iTunes it says it's 'no disk in the lower filters, no disc in the upper filters '.  I am able to burn CDs with Windows Media Player, so I think the problem is with iTunes and not my computer.

  I re-downloaded iTunes several times, but this has not cured the problem. Now I would try to uninstall iTunes and then reinstalling iTunes... but I'm afraid that I might lose all my itunes Store purchased music if I uninstall itunes.  Am I wrong?

  Help!  Thank you.

  John Healey

  Hey John,

  GEAR licenses this is CD/DVD recording 'engine' for Apple computers for use in iTunes for Windows. This recording 'engine' is the code of the software which adds disk recording cababilities to their product.

  If you encounter registration problems, they can be linked to drivers GEAR being damaged or improperly installed. You can download the latest drivers of VEHICLES or better yet, make sure they are installed correctly. The following control for Windows x 86 guide/list will help you determine if they are installed correctly. In the first test, make sure that C:\windows\system32\gearaspi.dll is in the Windows\System32 directory. Simply copy and paste the driver in the Windows\system32 directory.

  To check that all drivers of GEARAspi is installed correctly please check the following points:

  On 32-bit systems, make sure that:

  * C:\windows\system32\gearaspi.dll is located in the Windows\System32 directory
  * GearAspiWDM.sys is located in the Windows\System32\Drivers directory

  On 64 - bit systems, verify that:

  * C:\windows\system32\gearaspi.dll (32-bit version) is in the Window\SysWOW64 directory
  * GEARAspi64.dll (64-bit version) is located in the Windows\System32 directory
  * GearAspiWDM.sys (64-bit version) is located in the Windows\System32\Drivers directory
   
  Next:

  In the Device Manager (Manager button on the Hardware tab in the Start Menu |) Settings | Control Panel | System) double click on DVD/CD-ROM drive drives entry. Double click on one of the listed CD/DVD recorders and go to the tab drivers press the Details of drivers and make sure GEARAspiWDM.sys is listed in the driver files and the digital signer is Microsoft Windows hardware compatibility. On the Details tab, select the upper filters of class of the pull down and make sure that GEARAspiWDM is listed.
   
  In system information (type msinfo32.exe in Start Menu |) Run...) Verify that there is an entry called gearaspiwdm in software environment. System drivers. The status of the driver should be OK, and it should be started.

  For your information:

  iTunes for Windows Vista or Windows 7: CD troubleshooting problems caused by device filters

  http://support.Apple.com/kb/HT2615

  Kind regards

  Savan - Microsoft technical support.

• Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

  Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

  Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi, Dorian,

  Thanks again for your response. Really, I apologize for the inconvenience caused to you.

  You can try these methods to solve the problem.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) press Windows key + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  If the problem persists, use method 2.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

  Thank you

• Toshiba 23WL56G: can't change the PC RGB mode settings more

  Hello
  I have a problem with my (older) 23WL56G: I changed some settings in PC RGB mode and cause of that I can't change the settings more (the image flashes and closes the menu seconds)

  Q: is der any method to reset the TV?
  There is no entry for this menu there is probably a code I can enter the menu? (or a combination of button that I push?)

  Thanks in advance

  Have you tried to reset the TV?
  Do this.
  GO to the system configuration menu, select TV point Reset and press OK to select.

• How can I replace the buttons of navigation with more obvious?

  
  

  Here is the web page: http://josephskibell.com/ . I just picked up this Web site to a friend and open in Dreamweaver, but the code is such that the square little navigation buttons existing, four at the top of the page do not appear in design mode (these change the images of the book).  The client wanted a few more 'obvious' buttons here because people don't understand that these small squares are buttons.  Arrows work best.  Can someone advise?

  Thank you

  You have download NEW navigator.png file in the folder on your server?

  It does not look like it.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• can't burn the CD after downloading Windows 10

  After downloading 10 Windows on my HP computer, I can no longer burn my playlist iTunes on a CD.  How can I fix this problem?

  The upgrade of Windows 7 to 10 (which is what I assume you did) can be very tricky.  From what I hear, Microsoft did a pretty good job except perhaps to update the drivers.  (In fairness to Microsoft, there are a lot of flavors to them and they can be very tricky).  Try to go to Device Manager and see if you can update your drivers, especially the Apple Mobile Support & CD drivers (for your particular brand).  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• How can I burn the documents and pictures to my CD/DVD combo drive

  I have a cd to format documents and some documents and saved pictures. They seem ready to burn, but I can understand how to burn them.  Windows Vista SP2. Power PC V311 Spec.

  I have a cd to format documents and some documents and saved pictures. They seem ready to burn, but I can understand how to burn them.  Windows Vista SP2. Power PC V311 Spec.

  ======================================
  Maybe the following articles provide some ideas
  How to burn a data CD. :

  Windows Vista - burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Windows Vista - burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Personally, I find the useful free software DeepBurner:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  DeepBurner Free
  http://www.DeepBurner.com/index.php?r=download
  (Free DeepBurner 1.9 2.67 MB)
  (name of the file to download: DeepBurner1.exe)
  (Windows XP/Vista/7)

  The following link might be worth a visit:

  How to burn CD/DVD with Deep Burner
  http://www.ehow.com/how_4494548_burn-CDDVD-deep-burner.html

• How can I delete songs from a cd to remove the cd so that I can re'burn the songs?

  I have made a mistake while burning a cd and can not reburn until I have erase the cd again.

  I have made a mistake while burning a cd and can not reburn until I have erase the cd again.

  If it is a CD - r, you can't delete anything. If it is a CD - RW, you can. Who is this?

  My advice is to use CD - r and not the CDRW. They are much cheaper and they are much more reliable. If you throw a now and then, it costs only a few cents.

• Can not burn the media "connect a burner and restart the player.

  I have a laptop Dell Latitude with windows 7 and WMP 12.  The two programs are underway.

  Until recently I could burn CDs without any problem.  Now, I get the message:

  connect a burner and restart player

  I tried troubleshooting and remove/reinstall the readers of DVD-CD-ROM as suggested by the previous discussions on this issue.  None worked.

  What to do next?

  Thanks to all those who can help you

  We went from music, Photos and videos for devices and drivers>

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Then try this one! R

• Can't burn the cd HELP!

  It leaves me to drag items to create the burn list. Items have a red circle that are attached to them. I made the cd of these same items, now it won't let me. Help, please.

  It leaves me to drag items to create the burn list.

  What is the "it" you refer to?