can't configure my printer Brother MFC-495CW wireless

Similar Questions

• Printer Brother MFC-495CW will not work under Windows 7 64-bit

  I have installed the Brother MFC-495CW printer on my laptop and the printer does not print. It shows the printer either 'ready' but 'offline' on the screeen status monitor. I tried to reset the print spooler and reinstalled the printer software several times. What should I do to get this printer to work.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• Unable to connect to a printer Brother MFC - 240 c to Windows 7 computer network

  The computer of my network which is connected directly to the internet and my router is a computer running Windows Vista (32 bit). My computer is connected through the network to access the internet and the printer connected to the computer base. My computer was also under Vista and networking has worked well.

  I installed Windows 7 (64-bit, not by choice, done automatically) on my computer and now I can't connect to the printer on the Vista machine. I can access the internet (even if it is significantly slower than when I had vista) and on basic computer file sharing, but I can not configure the printer. The printer is a Brother MFC - 240 c
  If anyone can help it would be greatly appreciated.

  Thank you

  I'm assuming you get an error indicating that the print driver for 64-bit is not installed in the Vista machine.  You can either install a 64-bit driver that has the same name as the x 86 driver on the Win7 machine printing and reattempt the connection, install the 64-bit driver that has the same name on the Vista computer (for other 64-bit machines), but it's more difficult.

  Alternatively, you can set the machine to check Windows Update for a printer driver that has the same name as the 32-bit print driver.  If gpedit.mcs run for the version of Windows you have.
  Computer configuration
  Administrive models
  Printers
  Extend the point and print for windows update research connection

  If there is no matching driver name, you cannot make a RPC connection, but you can create an SMB connection.  Search for Local Port.  There are many posts on this.
  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• All-in-one printer, Brother MFC-9700

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  I have a new laptop that has a Windows 7 operating system.  It does not recognize my printer Brother MFC-9700.  I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system.  How can I determine that?

  In addition, I don't want to crush by current drivers that work with my old computers.  This download may be a driver separately on my printer?

  I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer.  Access to the laptop is via a wireless router only.

  Any suggestions/step by step directions about the conduct of a download would be useful.  I'm a Novice Senior.  Will be

  How do you know if you have Windows 32 or 64-bit

  Start > right click on computer

  Select Properties

  Under system, you will see listed Windows 32-bit or 64-bit

  32-bit applications can run on 64-bit systems, but not vice versa

  When you run older applications, you should consider the installation of XP Mode with Virtual PC for Windows 7 (free)

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  It's as easy as 1-2-3

  Update of Brother MFC-9700 downloads - I suggest that you always go here looking for drivers.  You want to maybe create a folder and make the backup copies of the software.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc9700_us

• All-in-one printer, Brother MFC-7840W print mixed fonts unexplained & print formats that appear in documents printed.

  I have problems printing with my Brother MFC 7840W.  The printer has been installed and uninstalled several times and drivers have.  I always have unexplained mixed fonts & print sizes that appear in printed documents.  It doesn't matter whether they are word documents or another program.  It is not the document!  This has been verified repeatedly.  Computer experts maintain that it is a matter of Vista.  Help!

  All-in-one printer, Brother MFC-7840W

  Hello

  • If it works well before?
  • If so, what were the changes made before the issue started?

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Why not print our model Printer Brother MFC-8885CW

  We tried for several days to get our brother model MFC-8885CW printer to print!  We use Windows 7 Pro. Edition if that helps any.  Please let us know how you worked your printer driver?  Sincerely, Bob and Connie Richards in Iowa City, Iowa.

  Hi Bob,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you cannot print using printer Brother MFC-8885CW.

  I would appreciate it if you could answer the following questions to help you best:

  1. what happens when you try to print?

  2. do you get an error message?

  3 did already worked on the computer?

  4 have have there been recent changes made on the computer before the show?

  I will certainly help you with this issue.

  Here are a few methods that you can try in order to solve the problem of the printer.

   

  Method 1: Run the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2: Update the printer drivers and check.

   

  Install the latest version of the drivers from the following link and check.

   

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc885cw_all

   

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

   

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Printer HP psc 1210xi range can be configured to print wireless?

  Hello Forum - anyone know if the printer mentioned above can be configured to print wireless or is it more cost effective to simply buy a new printer?       Run Windows XP thanks for any help-

  Perhaps you could get a wireless router that supports USB printers, but it would only print of this configuration, not scan.

  I recommend you to get a new wireless printer.

• try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer

  try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer

  Hi jande1,

  Please see the following link for the Brother's Web site:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/DLF/000000/003800/dlf003837.html?reg=us&dlid=dlf003837&dispforlist=1&OS=74&type2=1&prod=mfc255cw_all&c=us&lang=en&flang=40

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot make it work.

  How can I make my printer Brother HL - 5150 D work on Windows 7, he said: it is not compatible and I cannot get

  Microsoft has decided to change the "internals" of "device drivers" how to "interface" with Windows and devices.    If the material does not have a driver for Windows 7, it's a 'result' of the device 'manufacturer' is more "willing" to support the older device.  Microsoft does not have drivers for Microsoft not branded device.

• How can I configure Windows 8 to remember my wireless keys?

  How can I configure Windows 8 to remember my wireless keys?  I have 4 SSID in my house, and whenever I connect to either of these wireless networks I re - enter the wireless key, even if I have already connected to it several times before.  Windows 7 remembers them as do Apple products.  It's really annoying.  (Please do not recommend 3rd party stupid WiFi8 app - it is undesirable)

  Yes, I meant Windows Defender, I apologize.

  I solved my problem by taking the direction of the Intel PROSet/Wireless WiFi connection utility WiFi card. I have the system configured to allow the Intel tools manage the WiFi, but Intel for some reason any would forget that he had the credentials. When I put management back to Windows 8, the problems disappeared.

• Printer Brother MFC 210 unable to clean.

  Message on the screen-impossible to clean.

  Hello

  Check with the support of brother, their documentation online and drivers. OEM brother is responsible
  for the proper functioning of the printer and their drivers provided.

  Brother - MFC-210
  http://www.brother-USA.com/SiteSearch.aspx?SK=MFC%20210

  Brother - MFC-210 Support
  http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/colormfc/mfc210c_all.html?reg=us&c=us&lang=en&prod=mfc210c_all

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  If this does not help, then you should contact the Support of brother.

  Brother - Support
  http://www.brother-USA.com/support/

  =============================================

  These can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• printer Brother MFC-J6910DW loaded onto PC Dell 9300, shared on the network, running windows 7 on Toshiba Satellite laptop, it cannot find the printer cannot print. ,

  other home computers can find and print on the Brother MFC-J6910DW, but my Toshiba laptop cannot find or print. How can I fix? Not too much computer.

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that you can not print on a network share. I will try to help you with this question.

  (1) did you make any changes before the show?
  (2) you receive an error message/code?
  (3) what is a wired or a wireless printer?

  I can't print from my computer over the network. (For Windows®)
  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/FAQ/FAQ/000000/002600/000056/faq002656_003.html?reg=EU&c=eu_ot&lang=en&prod=mfcj6910dw_all&cat=114
   
   
  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
  We can't wait to hear back on your part.

• How can I configure to print wirelessly on a Mac

  Hi guys,.

  I recently bought the HP Laser jet P1102w.  I took the printer on location work and used for the first time.  It was a process of soimple of the printer and automatically downloaded and installed MAC software.

  As we were out of the office, us were not connected to the wireless network and was therefore not able to configure the printer to the netwrok.

  Now that we're back in the office, I want to set up the printer so that it can be used without wire of all devices connected to the network.

  I can't find how to do on MAC OS X 10.6.8.  I removed the printer from the Print & Scan utility and tried to install it again when you are connected to the network, however I am still only able to print when connected by USB.

  I understand that I can print via the device connected to the network, but rather would set it up to do all together with wireless.

  Please can you point me in the direction to find the instructions for set up?

  Any help is most appreciated.

  Hi @EI2014 ,

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Claire on the former network settings on the printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the Mac.

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• Can I use my printer Brother HL - 1230 on Windows 7

  We just bought a new Dell with Windows 7 hard drive.  Is it possible that I can use our printer brother HL-1230 with this set up?

  The site of the center of compatibility Windows 7 here:

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Brother%20HL-1230%20Laser%20Printer&v=Brother&uid=HL-1230ZU1&l=en-US&pf=4&pi=9&c=Printers%20%26%20Scanners&sc=Laser%20Printers&os=32-bit

  indicates that your printer is compatible with Windows 7. However, this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Brother-printer-driver-HL-1230-parallel-not/323e6eb5-5c8d-452A-9934-486d6d886fb1?page=1

  can be useful. A poster reports success using the Vista drivers from the Brother's Web site.

  Note: I recommend manually create a system restore point before proceeding if you decide to try.