Can't get my pilots of networks on windows 7

Similar Questions

• I can't get the XP computer recognize the Windows 7 network file share more wireless

  Problem file/network sharing wireless with a professional system XP and Windows 7

  I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network...  I have set up my network on the new computer and can see the files on my new XP computer, but I can't get the XP computer to recognize Windows 7 one.  What should I do?

  Hi Captive,

  
  Method 1:

  I suggest you to check if temporarily uninstall the antivirus software on the computer Windows XP allows you to connect properly.

  But don't forget to install the software after troubleshooting is done such that your computer will be at risk.

  Method 2:
  You can also check the settings of firewall on the windows XP computer. You can check if the ports are opened correctly for the network to connect. See the help link - below
  http://support.Microsoft.com/kb/283673

  Method 3:
  If the problem persists, you can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• How can I get my icon of network connectivity added to the notification (to the left of the date) area?

  original title: Hello, how can I get my icon of network connectivity added to the notification (to the left of the date) area?   Thank you, NT

  The icon disappeared after stopping at the wall accidentally. When I right click on the taskbar, go into the properties box and notification, network system icon is grayed out.

  Thanks for your help.

  Hi NT,

  You can read the following article and check if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  You can also consult the following articles and check.

  Show all icons in the notification area (system tray)

  Remove icons from the notification area (system tray)

  Hope this information is useful.

• How can I get the hybernation (at rest) for windows xp?

  How can I get the hybernation (at rest) for windows xp?

  Hi IreneHess,

  You can enable the Hibernate power options. Click Start-> settings-> Control Panel-> power-> Hibernate Options-> enable hibernation.

  I hope this helps.

• How can I get Dell inspiron N5110 to 10 Windows?

  Original title: window updates

  How can I get my dell inspiron N5110 in windows 7 be upgraded to window 10, Dell said it was not among the models he tested for Update window 10.

  Dell statement why would you want to force it?

  Without driver support Dell you would be silly to force an upgrade.

  But if you want too,

  Just buy a new hard drive or ssd and replace the existing one and keep it in case the 10 is not training.

  Download the iso and make it bootable on cd or flash drive and install win - 10 to the new disk.

  https://www.Microsoft.com/en-us/software-download/Windows10

• How can I get my screensaver that worked on windows xp to run on windows 7?

  Original title: How can I get my screensaver that worked on windows xp to run on windows 7 error: the version of this file is not compatible with the Windows version you are using. etc. I know that you saw the message before.

  computer brand new, no change. try to load my programs of hp simple save on my new computer.

  The msg is to tell you what is not compatible

  You can not copy/transfer a program from another PC

• How can I get the old search wizard on windows vista/windows 7?

  Original title: bringing research research assistant, new bad engine

  Dear all.

  I like Windows XP search assistant as if worked as an engine of 'real' research, for example, bing, google and search keywords.
  The current one is too basic to windows vista and windows 7 is rubbish and doesn't like the old.

  How can I get the old search wizard on windows vista/windows 7?  If I can't do it, how I'd get that to happen?

  Your

  Tom2020

  HI Tom2020,

  If you want to leave comments about the research, please do so at:

  Windows 7 comments

• Change from windows to mac, how can I get the programs I bought for windows?

  Change from windows to mac, how can I get the programs I bought for windows?

  HAV photoshop loose 11 for my windows computer but I have now bought a mac. I can do something to get the program, I have to convert it to mac?

  Hello

  Please see a product for another language or version of trading platform

  Hope that helps!

  Kind regards

  Sheena

• Can't get the Time Capsule network to see Airport Extreme?

  I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

  Any ideas would be very useful.

  The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

  First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

  If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.

• Help! I can't get on the internet - Pavilion a220n Windows XP

  Everything seems to be in working order, but when I click on Internet Explorer or Mozilla Firefox, I get the white screen that says: could not connect to the internet.  I got two new modems to Comcast, because they thought it might be a modem problem and had a tech out home Comcast to test new modems.  It determined his test that modems work correctly and my IP address is correct (after having released it renew).  It disables my firewall (Kaspersky), but still could not get on the internet.  It suggests that there is probably something simple that is wrong with the settings on my computer, but he can't do something, because he will be in trouble if he saw anything else with my computer.

  I go to the HP website and follow the directions under the "resolution of the cable, DSL or other broadband Internet connection problems (Windows 98, ME and XP)."  When I get to step 6, I type "netsh int ip reset c:\resetlog.txt" after the prompt on the black command screen.  I get answers "" could not load the programme of assistance following DLL: NAPMONTR. "» DLL", and" "could not load the programme of assistance following DLL: DOT3CFG."» DLL.  I leave command prompt and try to go on the internet and still can not.

  Then, I go to my network connections and select my Internet Protocol and select "obtain an IP address automatically" and "Obtain DNS server automatically", click OK, restart my computer, and then I still can't get online.

  I call HP and they help me without load me $59 from my computer is way past it's guaranteed.  My computer is about 5.5 years, but I have installed extra RAM on this subject, so he must have a slightly more useful life.

  Thanks in advance for any help.

  Message edited by Nincycle on 02/04/2009 13:41

  This analysis comes to check the integrity of files. I think that the missing DLL must be replaced by reinstalling the OS. You can use the recovery disks or boot from the recovery on the hard drive of the computer and select a standard recovery. He will leave intact files and reset all the files of the OS.

  http://support.HP.com/us-en/document/bph07145

• I removed the toolbars and you can't get back them. I use Windows 7 OS

  I can't get back my toolbars, and I don't have the option to choose "display". I clicked on each of them to remove to do a screen capture and thought I should be able to get back them when done, but I'm not finding something that will allow me to do.

  This has happened

  Don't know how many times

  == I removed the toolbars to print screen

  If you press the Alt key, the menu temporarily bar re - will appear, you can access the view menu to make the changes.

• Where can I get my refund of license of Windows Vista?

  Hello

  planning on buying a new satellite pro the next year and I'm not interested by using vista. going to put ubuntu on it. where can I get my refund windows license?

  Younes

  : D

  It seems you have misunderstood something. Nobody will not refund anything!
  Toshiba laptops are delivered with the Windows operating system; Start XP Vista now
  The OS comes with the laptop!

  If you have the laptop with the Microsoft Windows operating system branch, you can use the windows of this laptop for free. This means that you bought an OEM license (don t mix is a full license) which can be used on this laptop!

  You need t to use Windows, but you will get no refund!

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How can I get my woking of golf with windows 7 premium Simulator it was working very well with xp___

  HOW CAN I GET MY P3 PRO swing work with windows 7 it was working fine with xp

  Hey golfer.

  You should check whether the game is compatible with Windows 7 or not. Here is given is the link to verify the compatibility of all software\hardware.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If the game is not compatible, to work around the problem, you can try to install it in Windows XP compatibility mode and check if that helps.

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.
  2. Follow the instructions contained in the resolution of the problems.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  For more details follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get my settings to save a window opening in Middle normal and maximized.

  Original title: cannot get windows size to save.

  How can I get my settings to record with respect to the windows that open in normal and maximized parameters.

  I did the right click on Solution Explorer icons and maximized value, but they open into small windows.

  Thank you

  Here are some instructions I've done for people who have this error message and are sometimes a little nervous about editing the registry:

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\system\currentcontrolset\control\windows]
  "ErrorMode" =: 00000002

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fix13.reg

  After you save the file, close Notepad.

  Locate the file fix13.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fix13.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fix13.reg file when you are finished.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873