Error during the processing of purchase DF-BPA-09

Similar Questions

• Media Center does not download information Guide - error during the processing of the data

  Media Center displays an error saying I need to look at the log of update, but I can't find the update log. Try to download the Information Guide to hand does nothing.

  Of your last log its connection and download the guide, so there is no connectivity problem as stated above.

  Try clearing the guide and the tuner configuration data and set up once again and then check if the guide updates correctly:

  1. close Windows Media Center if it is open.

  2. go to Start , type services.msc in the search box and press ENTER.

  3. look for the following services and check the status field, if they are started and then right click on them and chose to Stop:

  ·         Windows Media Center Receiver Service

  ·         The Windows Media Center Scheduler service

  4 open tasks now CTRL and SHIFT Manager, and then press the ESC key.

  5. click on the processes tab, then click on Show processes from all users .

  6. in the list, click the name of the Image to sort by name, and then look for the following:

  ·         ehmsas.exe

  ·         ehrecvr.exe

  ·         ehsched.exe

  ·         Ehshell.exe

  ·         ehtray.exe

  ·         mcGlidHost.exe

  7. in the case of imperfections, right click and choose end process.

  8. go to start, in the search box, type the following path: C:\ProgramData\Microsoft\eHome

  9. find and delete the file mcepgX-X - X.db and X-mcepgX-X file

  After that it's over, go through the configuration of the original tuner once again and check if the guide updates correctly.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PSE9: Get all of a sudden the error during the processing of RAW camps files

  I am factory PSE9 and went to process several RAW files today as I have done several times in the past.  However, all of a sudden today even though the settings are always set to MAX JPEG I get prompted to save each file as a PhotoShop file.  Then all of a sudden he started to process all files automatically as in the past, but once I get the following error for each individual image file.

  Start the processing of multiple files

  File: 'C:\Users\desktop1\Desktop\2011_08_20_Early_Morning_Garden\_MG_0992.CR2. '
  Error: Parameters for the command 'Save' is not currently in effect. (- 25923)

  I made no changes to the PSE9 and as said have done this several times previously.

  Any help would be greatly appreciated.

  Thank you

  You might have set gross of camera to open the files in 16 bits/channel.

  Raw from the camera and at the bottom of the dialog box to open camera raw

  Choose 8-bit/channel under the bit depth and click OK and then try

  process multiple files.

  MTSTUNER

• I get an error during the in-app purchase

  Hello! I am Huy. The Japan student. I get an error when buying in-App error "your purchase could not completed, support contact Itunes Support at www.apple.com/support/itunes/ww/.

  I'm afraid to have to do what the message - says contact Apple directly.

  We are just other users like you, and we can not help with this problem.

• "There was an error during the processing of a page.  There was a problem reading this document (109).

  Hi all

  I am tech support on site and some of my users receive the error message above (same error code, message varies).  I tried several fixes to note here: Adobe help

  Any help is greatly appreciated!

  Windows 7 Pro 64 b.  Adobe Acrobat Pro 10.1.12

  Download Assistant

  After hitting ctrl + OK (discovered this trick after reading these great forums!) I get this new error:

  

  I'm a bit of a loss compared with Sabian. What exactly users trying to do when they get the message? It almost seems that they are only trying to launch Acrobat and there is a problem. In this case, a repair is necessary. However, I'm back to not understand what they're trying to do, in the operating system or Acrobat, and where the problem may be resulting to be located.

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• An error occurred during the processing of the report. (rsProcessingAborted)

  I get this error in SharePoint 2007.  I used Visual Studio 2005 (compatibility issues) to create a report.  I get this error when I try to run the report in Bus portal for Dynamics GP.  I can see and run in Visual Studio without errors.

  Here is what I get:

  • A mistake has during the processing of the report. (rsProcessingAborted)
    • Cannot create a connection to data source 'RIC_PIName '. (rsErrorOpeningConnection)
      • For more information about this error navigate to the report server on the local server, or enable remote errors

  Hello

  It is not a community forum for issues of Sharepoint.

  Find as appropriate (forum Legacy} on the left side of this page and ask your question on this forum.)

  http://social.technet.Microsoft.com/forums/SharePoint/en-us/home?category=SharePoint

  Don

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "The installation process has encountered an error during the installation of the shared technologies."

  Basically, whenever I try to download Adobe Premiere elements 11 on my Windows Vista computer, to halfway through a message appears saying that "the installation process has encountered an error during the installation of the shared technologies. If please restart your system and try again. »

  Whenever I insert the disc, I select the trial version, in case I have download the full version and it allows me to use my serial code.

  Someone said the destination folder could not contain more then 250 characters, then I changed its position of "C:\Program Files\Adobe\" in "C:\". ", but he still came up with the same message!

  I downloaded the new Adobe Reader 10, but this makes no difference to the process... no matter what I tried he always comes up with the same message.

  I also activate my antivirus software during the installation of Adobe Premiere Elements. Again, this is not do the trick. And I restarted my computer and tried to download it and not download more than once!

  Each time the same message comes back, and I have no idea how to fix... Its not my memory challenge which is a problem, because I currently have 50 GB free on my OS C:\ drive.

  I also have QuickTime version 7.6.9, which is apparently necessary?

  If you know something that I have not tried that can work, or the problem causing this and a solution to the problem, please can you let know me, thanks!

  Refer to this:

  Troubleshoot installation | Photoshop Elements, Elements first. Windows

  Mylenium

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• 513 CAPI2 event; Cryptographic services failed during the processing of the OnIdentity() call in the object of the System Writer

  * Original title: 513 CAPI2 event

  Hello.  We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:

  Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object.
  Details:
  TraverseDir: Impossible to push the subdirectory.

  System error:
  Unspecified error

  Here are the details:

  -
  -
   
    513
    0
    2
    0
    0
    0 x 80000000000000
   
    1039076
   
   
    Application
    KFI - SBS.kfi.local
   
   
  -
    Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
   
   

  We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2.  What else can be done so that we can solve the problem of System Writer.  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• An order has been cancelled or stopped during the processing of multiple files

  I use Photoshop elements 13. I'll save the files from my camera on my desk. Upload photos, edit them, and then while trying to save the changes, I get an error message: "an order has been cancelled or stopped during the processing of multiple files. Continue with the next file or stop? "How I lost my job. a large part

  I was not able to find much about this error online then consulted for relief in this case.
  
  

  Thank you in advance!

  Partial solution.

  The problem occurs when the application is in the State 'restore down' (the middle between ____ and the X button). If I have the maximized application files do not delete.

  Just an info.

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar