Can't get the sync to android to work - articles seem obsolete

Similar Questions

• I can't get the sound or video to work on Skype, where he had previously worked.

  I can't get the sound or video to work with Skype where, previously, he had worked very well.

  Hello

  Sign in to Skype and make a Test call.

  Who will give you the steps to solve the problems, or contact the Skype Support.

  https://support.Skype.com/en/

  See you soon.

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• How can I get the type of coverage to work

  type of coverage

  How can I get the type of coverage to work

  Hi Ted,

  Once you take the type of coverage, it's ready to go!

  You are in a place to type in information?

  Once it is aligned, it works like a regular keyboard.

  B Eddie

• I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  Never mind.  I thought about it all.  Thanks anyway.

• I can't get the module slide show at work... he gets to 'Preview Slide 20' then just crashes to the top... of ideas?

  I can't get the slide show module in LR to load... ' Get a preview of the slide 20 ', he just hangs up. Any ideas?

  Thank you... I had the assistance service Adobe restarted my computer... corrupt file!

  Sent from my iPad

• How can I get the sync'd calendar items for spread to others?

  I try to get all the calendars (Google, Outlook, Exchange, Backflip) to be sync would be w / each other. The phone's calendar sync w/the Exchange and w/the Google Calendar. But the elements that change and at the end upward into the phone then do not go in the Google Calendar and vice versa. I know this might be a feature (things from a personal calendar might be coordinated w/tips on a schedule of work on the agenda of the phone, without mixing the two.) But for me it is not a problem. Exchange calendars items both my Google can be mixed. Is there a way to get the items on the phone's calendar sync would be a single source for then sync the phone to a second source?

  DragonOne,

  Thanks for your solution of sharing with other members of the forum.

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• How can I get the key 'AT' function to work again. When you type in the e-mail address cannot be completed.

  as the title above says...

  Can you use the SHIFT key with other keys and get the alternative symbol? What about the #2, it work keys (just testing to see if it is the keyboard itself)?

• How can I get the Outlook Express t o work to send e-mails?

  When I went to send a link to a video Today Show, I could not send it via Outlook Express. How to make a server to help me send videos from Web sites?

  When I went to send a link to a video Today Show, I could not send it via Outlook Express. How to make a server to help me send videos from Web sites?

  To use Outlook Express, you must set up your account with it. You must know the names of the servers POP3 and SMTP from your ISP uses and perhaps a few other things. The best way to get the information you need is normally to look at on the web site of the ISP, but you can usually also call them and ask them.

• How can I get the addon "Colorful tabs" to work with the addon "classic restaurateur theme?

  I have the colourful tabs addon. But after the addition of the addon Classic theme restaurateur (to retrieve my tabs on the bottom), the color tabs addon does not work. My tabs are now all the same color work addon of the tabs colorful so that all tabs are different colors, so to say to which tab is the one that you use the right then the active tab puts a thin line on the tab bar of the same color as the active tab. So if you have 5 tabs open and they are all the diffierent colors, whether the tab your page in the Green, then you will see a thin green line on the screen (sort of like a horizontal border line). I can see a colored line (different from the color of all the tabs are now) under the tab bar. If I click on a different tab, change the color of the line. I can't tell what color my tab SHOULD be if it was just work, so I know that this addon is installed and working, but not to the poster for a reason any. Is it possible to fix this?

  I'm under Win 8.1 (64) and 30,0 FF. Thank you

  If you only use the extension of the CTR for the tabs at the bottom, then there are other ways like code in userChrome.css or an extension like tabs on background that might work better.

  • https://addons.Mozilla.org/firefox/addon/tabs-on-bottom/

  You can move the tabs on the lower position, just above the navigation area without the use of an extension cord with code to userChrome.css that basically, you just give the tab bar a higher value of - moz-box-ordinal-group (most toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #TabsToolbar{-moz-box-ordinal-group:10000!important}
  

  See:

  • [997353/questions/997353] How can I put the back below the navigation tabs?

• Can not get the XML save data to work

  I'm trying to store data in an XML file.

  I want to create and store this XML file, I copied this example directly from the documentation (http://developer.blackberry.com/cascades/documentation/device_platform/data_access/working_with_xml... but it does not work):

  // Create QVariantMap objects to contain the data for each employee
          QVariantMap firstEmployee;
  
          // Populate each object with data
          firstEmployee["firstName"] = QVariant("Mike");
          firstEmployee["lastName"] = QVariant("Chepesky");
          firstEmployee["number"] = QVariant("51649875");
  
          // Add each employee to a QVariantList
          QVariantList myEmployeeList = QVariantList() << QVariant(firstEmployee);
  
          // Add the employee list to a top-level QVariantMap, then wrap it in a QVariant
          QVariantMap topLevelEmployeeMap;
          topLevelEmployeeMap[".root"] = QVariant("employees");
          topLevelEmployeeMap["employee"] = QVariant(myEmployeeList);
          QVariant myData = QVariant(topLevelEmployeeMap);
  
          // Retrieve the working directory, and create a temporary .xml file in that
          // location
          QDir home = QDir::home();
          QTemporaryFile file2(home.absoluteFilePath("myXMLFile.xml"));
          qDebug() << "Came here";
          qDebug() << home.absoluteFilePath("myXMLFile.xml");
          // Open the file that was created
          if (file2.open()) {
              // Create an XmlDataAccess object and save the data to the file
              qDebug() << "I came in this if statement";
              XmlDataAccess xda;
              xda.save(myData, &file2);
          }
          else
              qDebug() << "I didn't come in this if statement";
  

  After having tried everything, I can't see the .xml file to display in the file Explorer. The print statement that prints the location... /data/ and the second print statement shows he's going in the case.

  I can not even an XML base to save, so I wonder if I'm doing something wrong.

  Thank you

  Hey there,

  Well, the thing is that she is using an object QTemporaryFile (file2) and according to the description of the class QTemporaryFile:

  ".... QTemporaryFile is used to create unique temporary files safely. The file itself is created by calling ( Open). The temporary file name is guaranteed to be unique (that is, you are guaranteed to not overwrite an existing file), and the file will be deleted eventually to the destruction of the object QTemporaryFile... »

  If the object of File2 is destroyed in your application, that would be your problem...  You check in the file while the application is running?  Otherwise, you must use QFile instead so that the file will still be there at the end of your app... etc. etc.

  https://developer.BlackBerry.com/Cascades/reference/QFile.html

• Can not get the States of relaxation for work in the widget of blank publication of Muse

  Hello

  I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

  I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

  Any help with this will be greatly appreciated!

  Tania

  

  Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

• Can not get the graphic import settings to work

  Hello

  I try to import a graphic by reference to a set DPI (222). The following code example graphic design is important, but don't know the DPI setting. You can see what the problem is? A few notes:

  -J' wrote an equivalent FDK and everything worked well, the same exact way.

  -The GetImportDefaultParams() fills a table of about 45 members and GetPropIndex() retrieves the unique index, which suggests that the parties are working

  -After experimentation, I conclude that parms [index]. PropIdent is still not defined, that seems odd.

  Thank you.

  var doc is app. ActiveDoc;

  var tl = new TextLoc();

  TL.obj = doc. FirstSelectedGraphicInDoc;

  If (!) TL.obj.ObjectValid) tl.obj is doc. MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  TL.offset = 0;

  var parms = GetImportDefaultParams();

  index = GetPropIndex (parms, Constants.FS_GraphicDpi);

  parms [index]. TypedVal = 222;

  index = GetPropIndex (parms, Constants.FS_FitGraphicInSelectedRect);

  parms [index]. TypedVal = false;

  var returnParms = new PropVals();

  doc. Import (tl, "C:\\temp\\delete\\222_dpi.jpg", parms, returnParms);

  Hi Russ,

  What exactly is your problem, I don't think that its really the value NULL of PropIdent?

  So I guess that your problem is, dpi is not defined.

  If I change one of them * DefaultParams(), I use this function:

  function SetPropVal (prop, propval, params)

  {

  var i = GetPropIndex (params, prop);

  If (i<>

  Returns false;

  If (typeof (propval) is 'number')

  params [i].propVal.ival = propval;

  If (typeof (propval) is 'chain')

  params [i].propVal.sval = propval;

  Returns true;

  }

  First parameter is the value of constant, the second the value to set, and the third the * DefaultParams.

  Hope this helps

  Markus

• CS5 synchronized color settings. How can I get the sync?

  My window of Photoshop CS5 for the States of color settings: synchronized. Your Creative Suite applications are not synchronized for consistent color.

  Question: How will I then get it synchronized?

  Chrissto @.

  Don't bother, just dismiss this dialog box. All means of "synchronization", it's that the same preset is applied to the color of each application settings. You can do it manually.

  But there is no particular reason to have the same color settings in all applications. Requirements will be probably different and my color settings are deliberately not synchronized (I wouldn't dream of ProPhoto RGB in Illustrator or InDesign, just as I would never policies CMYK, the value "preserve numbers" in Photoshop).