CAN´t of the points with the arrow keys

Similar Questions

• I can't scroll my podcasts more since the update to iTunes 12.4. I can only use the arrow keys to go through my podcasts, and then take it all down.

  I have a MacBook Pro and update to the latest iOS and iTunes. I can't scroll in my podcasts to choose which episodes to synchronize. I can only use the arrow keys to navigate, but then while he list of podcasts on the left, it moves also down from the bar on the list of episodes, so by the time I spend the first 7 or 8 I can't see the episodes more to choose which to add/remove.

  Same here, very frustrating.

  I found if you go in your library > Podcast, then control click on the podcast, you can select Add to the device, which works, but is in no way acceptable.

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• I can move me is no longer an object with the arrow keys

  Sure I have inadvertently option disabled to select an object and move it with the arrow keys on my keyboard, but can understand what I did--or how to enable this option again.

  Illustrator CC

  iMAC 27 "end 2013

  10.9.5 OS

  Found the answer in another thread. Somehow my keyboard Increments area was changed to a small extent (. 00002 ") that I could not see the object move, nor does the X & coordinated change. I didn't change this preference to. 00002 ", but it is now fixed.

• direct selection - move the anchor points with the arrow keys of the keyboard

  Hello

  I use Illustrator CC.  I just use the image tracking tool to create a version vector of my company logo.  It worked pretty well, but now I'm just trying to clean it up a bit.  I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.

  I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way.  I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct.  I don't see anything else to do.

  Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?

  Thanks in advance,
  Paul

  General Prefs, area keyboard Increments. Have something you need.

  Then use Nudge (up, down, left, right arrow).

• How can I move a symbol with the arrow keys in canvas htlm5 CC animate?

  I'm going through a 'Hero' with the arrow keys, but do not know how addEventListener 'allure '.

  Code would be nice...

  As a general rule, if you want to do something in HTML5 Canvas in Animate, and the Code Snippets Panel doesn't have an example of what you want to do, do a Google search for "createjs whatever you want to do." Search for "createjs-keyboard listeners" showed so far include:

  ilike2Flash: keyboard events in EaselJS

  It seems that the keys are trapped by the browser, and so you will have to use the window listeners to see when someone pressed a key. The code example does what you ask for. It is written in HTML, but the Javascript part of the example should work in the Actions of Animate Panel.

• LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

  If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

  I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

  It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

  Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

  I'm hoping someone will have a suggestion that will clear up this problem.

  As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

  Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

  Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

  You can consider the issue closed.

  Thank you for trying to reproduce the failure.

• Why the screem has increased so I can't see the arrow back?

  Why is the screen view area increased?

  Hello

  He could have an automatic update, corrupted graphics driver, etc.

  There are a number of things to try:

  see if changing the resolution of the screen, without updating the drivers graphics, work

  otherwise:

  go to your graphics card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and if an update that caused it to change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• I can't drag the arrow to change my screen resolution. He moves only from high to low-nothing in between.

  I can't drag the arrow to change the resolution on my new laptop. He moves only from the highest to lowest - nothing in between.

  Hi Eileen,.

  Thanks for posting the question in the Microsoft Community!

  You can use only the highest and most low screen resolutions available and nothing in between.

  What is brand and model monitor?

  The resolution, you can use is based on the resolution that your monitor supports. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768 pixels and can work well with different resolutions. LCD monitors, also called flat screens and screens of portable computers often support higher resolutions and better suited to a specific resolution.

  The website can provide more information:

  Change your screen resolution

  http://Windows.Microsoft.com/en-in/Windows7/change-your-screen-resolution

  If you need additional help, let us know and we would be happy to help you.

   

• How can I move precisely image in the monitor by using the arrow keys?

  I am currently using first 13 items on my desktop Windows 10. When I use the special effects of culture, I am able to precisely position the top, down, left and right limiters by typing in a decimal percentages. It works very well, especially when you try to manually move the limiter in the monitor by holding down the left mouse button and dragging. Enter the percentage allows the adjustment takes place easily.

  However, I was unable to find a similar positioning tool for when I want to move the image in the monitor. The only way I know to move the image currently is holding down the left mouse button and dragging the image. What would be the most direct and intuitive way (for me) to precisely move the image, once you left mouse clicked on the clip to show the white frame with its 8 small white squares, simply hold the CTRL key, and then use the 4 arrows to position the image. However, holding the CTRL key and pressing the keys 4 arrow do not work, or not keeping the Alt key and pressing the key 4 arrow, nor does not hold down Shift Ctrl, shift, or Ctrl Alt Shift For me, it would help greatly to a precise positioning, if I could hold the CTRL key and press the arrow key should be.

  Anyone happen to know how to position an image in the monitor otherwise than by holding down the left mouse button and dragging the image where you want?

  Thank you

  With the clip selected on your calendar, click effects applied on the right side of the interface.

  In the effects Panel, open the path properties. Here you can define the Position and the scale and Rotation of your clip. You can also effects and keyframe animated trajectories.

• Artifacts when moving object with the help of the arrow keys.

  Hi all

  hope this is the right place to post this question.

  I want to write simple arkanoid game in Flash (AC3). I managed to write code that moves my paddle with the arrow keys. The code looks like this:

  function OnNewFrame(event:Event):void
  { 
      if (input.IsLeftHeld)
      {
          if (paddle.x > 0)
          {
              paddle.x -= 10;
          }
      }
      else
      if (input.IsRightHeld)
      {
          if (paddle.x < stage.stageWidth - paddle.width)
          {
              paddle.x += 10;
          }
      }
  }
  

  It works, but the result is ugly. The animation is not smooth, there are moments when the paddle stops for a moment. Also when the speed of translation is high (this is 10) you can see that paddle flashes at the ends, it resembles the unique problem of buffering. You can see both of these effects here: http://www.flash-game-design.com/flash-tutorials/movOb.html , identified flicker is less visible due to the amount of small translation.

  How to solve this problem? How can I enable double buffering (or maybe it is enabled by default)?  Any help will be appreciated.

  PS Sorry for the bad English

  Hello! I think you went backwards... First - in order to achieve the best visual transitions - you will not use travel speed at all. Second - you must pay attention to the establishment of the frame rate of the Flash document. Vivid games usually run at 60 frames per second. So I made a sample for you. Try it, it: http://cdn.dmldevelopment.com/plugins/tests/paddle/paddle.html . You can use arrow keys plus a key space to see how smooth the transition is. And you can download the source code here: https://rapidshare.com/files/3779443821/paddle.zip . Please let me know if I helped you. See you soon!

• Cannot change font size with the help of the arrow keys

  I can't change my fontsize by using the arrows in front of the box, or the arrow keys on my keyboard. (see image below)

  I tried searching the forum and other sites but found nothing...

  I am able to change the line spacing with the arrowkeys. I have change the standard font, other type of documents (web or print), if it's all caps or small caps, etc..

  It is probably something small, but can't find it...

  Thanks in advance!

  

  I think Jan means the small up and down arrows next to the font size in the user interface.

  Try to restore your InDesign preferences. Here is a tutorial: http://pfl.com/trb

• Problem with the arrow keys in some tools

  Then, as most of you know, you can use the arrows on your keyboard to change the radius of rounding of certain tools, add or remove segments of the spiral shape, etc. A tap should adjust your settings of the tool into thin slices. But in my case when I press the arrow key, it makes big changes. The same thing is 'C', 'X', 'F', 'V '. So I can't use these tools properly. Does anyone know how to deal with this problem? Thanks in advance!

  If you use a Wacom tablet, then you are a victim of the Wacom/Illustrator bug. As far as I know there is no solution yet. The only solution is to temporarily use a conventional mouse.

• I can't use the "Enter" key to take me to a Web site, I typed in the navigation bar - I have to use the mouse to click on the arrow 'go. ' Why? How can I fix it?

  I can't use the "Enter" key to take me to a Web site, I typed in the navigation bar - I have to use the mouse to click on the arrow 'go. ' Why? How can I fix it?

  An extension, probably "AVG Safe"

• When I restart and press f8 to go into safe mode, I can't scroll to the top I use the arrow keys, but she will not go up

  It shows the possibility to go in safe mode, but I can not just ride to select

  Try using the arrow keys on the numeric keypad (key '2' and '8'), but for those to work, your "Num Lock" must be disabled.  (Press the NumLock key, until the light Verr off Num).

  If this does not work and you are able to boot into normal mode, you can configure so that it starts in safe mode using "msconfig":
  Start-> Run-> "msconfig".
  Start msconfig, click on:
  Win.ini (tab)-> and then place a check mark in front of "/ SAFEBOOT"-> click on 'OK '.
  Restart your computer.
  He will then start safe mode.

  HTH,
  JW