Can't print or scan images after the installation of the Mavericks on iMac

Similar Questions

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Can I print data that I entered the health of Apple app

  Can I print data that I entered the health of Apple app?

  Yes! You will most likely have to screenshot data then hang your iPhone (including the charger) in your USB port in your computer. After that, you load your screen capture on your computer. Copy and paste into Microsoft word on your computer/laptop and then print! Then you have your printed data.

  I know this is a long process, but it works I tried. Please let me a good review!

  Thank you and goodbye!

  ~~~~~~~~~~~~~~~~~~~~~~~~~

  Best regards, @Jay.Arii

• can I print a mirror image of with a HP officejet 4620?

  Can I print a mirror image of using my HP Officejet 4620? If so, how?

  Hello

  It is not really a printer capability that allows you to mirror image printer, but even more the software which is the engine of the printer.

  What device/operating system are you using? If you are using Windows 7, you will find the mirror image option in the properties of printer below.

  Often the easiest is to use Microsoft paint to return your image in a mirror image and save the image to print later. In the painting, under the option do rotate, flip the image vertically or horizontally depending on the orientation of the original to get a mirror image.

  

• How can I keep a visible image at the end of the EP 13?

  When my videos ends EP 13, it becomes black. How can I keep a visible image at the end?

  crimpers

  So far my YouTube video playback are all ending with the game again screen with a bunch of photos to the videos that are not mine.

  I explore the concept of thumbnails of video in YouTube.

  Video thumbnails - YouTube help

  Which seems to imply that what you see before the play button is hit.

  I found the following

  How to pause youtube video embedded on the last picture? -Stack overflow

  But, still trying to understand how they actually follow through on the details of the discussion.

  RTA

• How can I get mini rear deck after the update to PS CC 2015?

  How can I get mini rear deck after the update to PS CC 2015?

  You can not. Mini Bridge used Flash and Flash is no longer supported in Photoshop.

• I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  If you see a blank white screen, see this link. If you see something else, please let us know what you see.

  Blank white screen. Sign in | Creative cloud Packer

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• My scanned image covers the whole window scanning functions.

  I can't highlight and so to finish the scan. The worst is that I tried all the buttons and screen size changes, but nothing works unless terminated the process of photoshop and start again... Any tips?

  Thank you

  Gotcha. Unfortunately, once you scan a photo Photoshop automatically wants to be the active program but her since you opened the software scan a menu of Photoshop, you can't do anything until you close the scanning software.

  The scanning software "should" do a separate window in your taskbar, but your screenshot, I see that it is not. You can see if there is an option in the configuration that will force the software to close after scanning of a picture or scanning software settings. If you have several images to digitize the sound is not ideal, but at least you won't be stuck.

  Another option is to see if you can alt - tab for the scanning interface. This would allow you to do the scanning interface the application enable then you could do something else or close.

  A third option is to double-click the Photoshop window. Because Photoshop becomes the request to activate it, you can resize all the interface that will allow you to click on the scanning software to make it active again. Before you start, that might actually be the best way to approach the problem of scanning. so do Photoshop slightly lower than the top of your screen and the value scan software then it will appear just above Photoshop. This way you can go back between the two programs without having to do a lot of image manipulation in Photoshop.

• I can't print ebay shipping labels after Firefox update

  After the last update Firefox to 22.0, I can no longer print on ebay or PayPal shipping labels. For ebay, I can print the invoice and PayPal, I can print paper of the total load. However, no pop-up window see when I go to print actual shipping labels.

  I did not change any settings after upgrading Firefox. In addition, I can print the labels on ebay and PayPal if I use internet explore (I prefer not to use).

  I've been printing of shipping labels on both sites for years on the same computer with the same OS (Vista). So the problem MUST be the update of Firefox.

  Anyone else encounter this problem and what would be the solution.

  Thank you very much. What you suggested, he has worked with all disabled. It seems to be an extension for Dragon Naturally Speaking. It seems like updating Firefox. All is well now. I really appreciate your help!

• I can't print from my computer to the HP 8500 printer. Printer is offline and cannot get online

  After a storm, my HP Officejet Pro 8500 A909n Series, I am not able to print from my computer to the printer.  I am able to copy and send a fax, but not able to do anything else.  I get a message that the printer is offline and what to do, but not be able to change it to online.   Help, I need advice and guidance

  Hello

  What operating system do you work?

  You can try the following methods

  Method 1:

  Problem: The printer is offline.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&LC=en&DLC=en&cc=us&site=null&product=3737195&key=null#N4586

  Method 2:

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

• HP Photosmart C4180 all-in-one: can't print or scan

  When I want to print or scan the message "cannot print or scan" and "Scanner failure" happens...»

  When I try to print the document will go to half way and then stops, same message arrives...

  If I want to download and print something good, the printer works!... but again if I try to scan something then it does not work...

  It happened all of a sudden, the printer and the computer have also worked well until this happened.

  I may be low on ink, two symbols like a candle flame, are at the bottom left screen, but a copy or scanning must always be possible even if faded, or...?

  Tried unplugging everything, but no luck...

  Can anyone help? Thank you..

  I am an employee of HP

  Since you said you the error message scanner failure, first try to make a copy and see if the belt scanner moves (moves the light) while copying.

  If the light does not move that it's hardware, you will need to service the printer please call hp tech support.

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• Redraw the images after the rotation of the device

  Hi, all)

  I need redesign my interphace after the rotation of the device...

  I have a method in myScreen,

  public LoginScreen()
  {
  scaleKoof = Display.getWidth () / 320.0f;
  Create the interface elements

  }

  If I coluld call it after rotating all might be good! How can I do?

  scaleRotation - all images are resized to my interpace...

  replace sublayout and check the dimensions, it is called after a rotation.