Can't remove used element Trash

Similar Questions

• Recorded TV causes Media Center to stop when the cursor is moved over the icon. Sometimes Blue Screen of Death. How can I remove the element from the list of recorded TV shows?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  "This problem that I've seen before - corrupted metadata in a recorded TV file causes MC to Issac when you click on" show in the list.
  And, it is useful to know that show is the cause.  :)
  Solution: Close Media Center.  Open an Explorer window and go to C:\Users\Public\Recorded TV.  Find the offending file, and either move it to another folder (unless it is a 'protected' program, you can always watch it in Media Player), or delete.
  The file name format is: showname_network_starttime(where starttime is presented as dd_mm_yyyy_hh_mm_ss (24hours). wtv)

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Network connections sharing ghost that I can't remove using vista and xp

  I just have this problem above. Old shared connections to the file systems on the laptop running xp that will not disappear. They also appear on another computer running xp on the same network but then xp enabled me to remove vista does not work. I've tried everything I can think of, but nothing works.

  Thank you for all that but...

  I was up at 02:00 and discovered that it was my fault all the time. No surprise there then.
  I had references to the readers that no longer exist that I forgot. Vista is not able to mark as not being more necessary, but allow recreation something with the same name and not necessarily the same content. The procedure to stop file sharing and then erases the link with the network of vista system request.
  I tried parts of your suggestions, but the references were external devices, I really expect Vista to hang on them in any case, they might still have been valid. I think there should also be a way to the administrator of killing existing or unwanted links to network locations.
  Thank you for your time.
  Peter

• How to remove the element in a scene without deleting the animation of this element

  Hello

  How can I remove an element in a scene (for example to 0:30) without deleting the animation of this element to (for example at 0:20)?

  I don't really know what to do.

  Benno

  Hello

  I have a little trouble to understand what you want. If you want that element disappears in your animation, you can switch the display in two keyframes on the right property before scoring 30 seconds. See below:

  

  You simply make a keyframe in the position "On" in the display property in the properties panel, then move on to an image and set a new keyframe on 'Off '. This will make invisible if you do not have to remove the animation. : )

  I hope this helps!

• After the installation of the first 14 Premier 11 elements elements is always on my desk. Can I remove 11?

  I just downloaded first elements 14. First elements 11 was already on my system Windows 10 and is always after the download. Can I remove the system? This will affect all existing video files? I selected to V14 format questioned after opening the first 14 elements, organize.

  You can remove PES 11 and which will not affect the files produced using PES 11.

  PES 11 withdrawal will cause no problem for the EP 14, either.

• Under my Adobe ID, I have several old versions of Photoshop Elements listed. How can I remove them?

  Under my Adobe ID, I have several old versions of Photoshop Elements listed. How can I remove them? I would like to give the software to someone who can use it. Thank you.

  Transfer (sale of your software) https://forums.adobe.com/thread/1355892

• How can I remove a dial of the watch is no longer used?

  How can I remove a dial of the watch is no longer used?  I have some that I would like to delete.

  Just played around and figured it out. Press the m slipped to customize the face, and then drag until the deletion.

• How can I remove a program which will not move to trash?

  How can I remove a program which will not move to trash?

  What program? If she has an uninstall program, which allows to remove it.

• How can I remove the bookmarks that are no longer used.

  I have a list of bookmarks on firefox. Many are more used.
  How can I remove the individual bookmarls of my list.
  Tried to highlight and delete them, but that does not work...

  You can right click and delete, select and use the key "Delete", or remove
  multiple bookmark click to the left of the favorite icon, and then add more with "Ctrl + click"
  or spread with "Shift + click" then delete.

  You can remove bookmarks as described for the deletion of history in

  http://KB.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items

  The reference to bookmarks won't in the details, because it is in the article above.

  http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

  You will be perhaps easier to delete bookmarks you don't want in the list of the bookmarks library. As noted in the article to bookmark sorting you can view and sort by additional columns, I recommend installing the extension "Show Parent Folder" link is in the article to bookmark, unfortunately that you can add the column is not sortable, but it provides valuable information.

• When I run Firefox the script Stumbleupon falls down how to fix this? And, as I really don't use it, how can I remove Stumbleupon please?

  I use Windows XP. I've recently updated to the latest Firefox. 'Stumbleupon' allows you to load, now a warning informs me that the "script" will not charge. can I fix? As I do not use 'Stumbleupon' anyway, how can I remove the option. I looked in the Control Panel Add/Remove and it isn't here. Thank you very much.

  • Click on "Tools" then "Add-ons".
  • When the add-on screen, click on "Extensions".
  • You can remove Stumbleupon here, but don't forget to restart Firefox

  Hope this helps

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• I need to use another email outside of outlook express, can I remove it?

  When I try to reply to an email in a Web page, he's trying to use outlook express.  I can't use it.  I have att and was created after 11, so I can't configure it with outlook.  I can simply remove outlook express?  He'll be back to att or gmail?  Help is a mess.  Oh yes and I run it on xp but I have a w7 as well.

  You can not remove Outlook Express because it is part of XP. The problem here is that Craigslist wants you to use a mail client and Webmail not. If the use of Gmail is good to you, see if that helps.
   
  How to set your default e-mail to Gmail
  http://www.ehow.com/how_5151392_set-default-email-gmail.html
   
  If you make the file Inbox.dbx Read Only, OE does not open yet. Perhaps it is another thing to try.
   
  In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx. Right-click | Properties and check the read-only attribute.

• IE 9 beta was not installing properly and now I can't use IE at all... How can I remove this version and reinstall IE 8? I tried MS site not avail__

  IE 9 beta was not installing properly and now I can't use IE at all... How can I remove this version and reinstall IE 8?

  I tried the MS site, nothing helps.

  back to the restore point and still have problems.

  internet access through backdoors on the emails.

  How to uninstall IE9 Beta?
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/7250c2d2-20e1-4F0A-8056-4a6abd9a0f9b

  If you still have questions, please ask the in Forum Internet Explorer
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Can't remove read only attribute even using the command "Attrib - r".

  I have my computer laptop configuration to dual boot Windows Vista and Windows 7.  I installed Windows 7 to see Vista, images, music files and videos Documents in its libraries.  These four files have become read recently that in Vista, and I can't remove the read-only attribute.  I tried to use the attrib command in command as suggusted in KB326549, but I get a message "access denied."  I want to be able to access these files from two operating systems so that I don't need to save the files on two hard disk partitions.  Any suggestions?  Thank you.

  Jon

  By default, you have only write access to folders and files located inside your user (c:\users\yourname) directory, some hidden folders, and any file that you created.

  The only time you need to write access to all files outside of this area is at this time do system administration or install a program.

  This can be done easily by running some tool or install the program you use "Administrator" by right-clicking on it and clicking Run as administrator, which allow the tool access to the system.

  It's the new way of doing things in Windows Vista - the system is locked, and only the programs you are running as an administrator or you request automatically the authorization are allowed to access your computer. This will prevent programs to access your computer without your knowledge.

  This command "Run As Administrator" is ideal to run on Windows Explorer and command control.exe (Panel).

  It is * NOT * recommended that you change the security settings to allow write access on the operating system created for files and folders, as this will significantly reduce the security of your system.

  So, in essence, it becomes a question of permissions/ownership.  Here's how to deal both:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product).  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!
  Lorien - MCSA/MCSE/network + / A +.