can't see composite deployed under SOA - MDS connection

Similar Questions

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon

• Can not see the security headers when you connect the OSB header

  Hi all
  
  I have a proxy service which I enclose GOSA oracle/wss_username_token_service_policy policy
  
  I test the OSB project proxy service in the SOAP-ui and when I pass the user name and password in the security header, be invoked successfully. So far so good.
  
  the entrance of SOAP I'm passing to the proxy service is as below...
  
  ------------
  < soapenv:Envelope xmlns:soapenv = 'http://schemas.xmlsoap.org/soap/envelope/' xmlns:bpel = "http://xmlns.oracle.com/CESB_APP/HelloWorld/BPELProcess1" >
  < soapenv:Header >
  < soapenv:mustUnderstand wsse: Security = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
  < wsse: UsernameToken WSU: ID = "UsernameToken-4" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  WebLogic < wsse:Username > < / wsse:Username >
  < wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > eu1 < / wsse:Password >
  < / wsse: UsernameToken >
  < / wsse: Security >
  < / soapenv:Header >
  < soapenv:Body >
  < bpel:process >
  < bpel:input > String1gfhyg123 < / bpel:input >
  < / bpel:process >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  -----------------
  
  within the stream of messages of proxy service, I log the header as $header, but I don't see the username and password that I'm passing for a request in the log file, the header is seen empty element something like below...
  
  ------
  
  < soapenv:Header some names matter > < / soapenv:Header >
  
  -------
  
  In the PS transport configuration tab, I put 'Yes' to get all headers, even I can't see the user name and password.
  
  Help, please.
  
  Thank you.

  So I can't have the password in the message flow?

  Would you really? Will vulnerable OSB security and therefore only the user name and optional directors are included in $inbound.

  In addition, why the username and password are not observed in the $header?

  $header holds the SOAP headers, while the security headers are not part of the SOAP headers, and therefore, these are not included in $header.

  Kind regards
  Anuj

• Can't see schemas deployed in JDev - used UpdateMetaDataDP.xml

  Hello.
  I tried deploying a schema under $AIA_HOME/AIAMetadata/AIAComponents/ApplicationObjectLibrary/Ebiz/V1/schemas, but am not able to see the changes in JDeveloper. Here's the script that followed:
  
  1. accessed to/oracle/product/AIA30/aia_instances/AIA_DEV/bin and run the following command:
  source aiaenv.sh
  
  2. accessed to/oracle/product/AIA30/aia_instances/AIA_DEV/config
  
  3 update UpdateMetaDataDP.xml to add below please request it:
  < name = "" AIAComponents/ApplicationObjectLibrary/Ebiz/V1/schemas / * "/ >"
  
  4. advanced to/oracle/product/AIA30/Infrastructure/Install/AID and ran
  Ant f AIAInstallDriver.xml-DDeploymentPlan=$AIA_HOME/aia_instances/AIA_DEV/config/UpdateMetaDataDP.xml-DPropertiesFile=$AIA_HOME/aia_instances/AIA_DEV/config/AIAInstallProperties.xml
  
  Got the "BUILD SUCCESSFUL" message.
  
  I tried to run the command "Ant f $AIA_HOME/aia_instances/AIA_DEV/config/UpdateMetaDataDP.xml" mentioned in the developer's Guide, but who sent me the message "BUILD FAILED" unknown element: DeploymentPlan error (). So try step 4 above, which worked well.
  
  Can anyone advice if I missed some configurations or steps, due to which I am not able to see the changes in JDeveloper?
  
  Thank you
  Jyotideep Singh (JD)

  HI JD,

  No, there is no update process, this should automatically.

  Something evil below is, that if you want to update all the files under the Directory schema, then
  Instead of
  

  It should be
  

  Note the double *.

  Otherwise, this looks good to me.

  Thank you
  Manish
  www.oratutor.com

• Can't see job Console under Administration in the workspace

  I'm working on demodrive for version 11.1.1.3 on Windows 2008 server.
  I can't find job console application library and under navigation > administer.
  
  Please let me know how I can activate these options

  Hello

  I had the same problem on the reader Vlamis BIC2G-demo (VM-ware image) as well as on the Amazon Web Services-version (AWS) 11.1.2.
  It seems that the (virtual) server must be restarted, and after that, it depends on the sequence in which you start services.

  11.1.3 Vlamis VM-ware image:
  I knew that after the start of the database Oracle (1) and (2) you should start the EPMA Services and Manager of calculation if necessary before starting the actual applications, financial reports or planning. Let som time from the start to the top of the individual services (5-10 min.)

  11.1.2:
  I start on a new instance
  I can't the compact version of services until work begins.
  Thus, in the Menu 'Start' 'all programs', I choose Startup Services detailed bat file.
  After that, I start Services in the following order:
  1 oracle Database (and headset)
  2 another service Oracle that do not remember the name of. Checked in Ontario who. It's 'Oracle Process Manager (bi)'
  3 EPMA-services
  4 Calc Manager Services
  5 x other relevant services for your demonstration needs.

  Here also give some time between individual start-ups. (a few minutes)
  I recommend, and X-large example with 15 GB of RAM to run a demo full - at least for HFM/Financial reporting.

  I hope this helps.

  krgds

  Soren Blak

  Published by: user7320113 on 2012-02-08 22:41

• Why can't the PCI 6040E under devices and Interfaces

  Hello!

  I intend to use a PCI 6040 E connected to a BNC 2010 to measure 3 different voltages as an entry. I installed the mx of NOR-DAQ 9.7.5 on windows 7 (64-bit). My question is why I can't see my devices under the "devices and Interfaces? even by Labview, DAQ assistant, acquire the signal, anaolge of entry... I can't configure the devices of this error: no supported devices found.

  Any idea? Thank you

  You're going the wrong way.  The latest version of DAQmx that supports PCI-6040 is 9.5.1.  See this article for more information: OR-DAQmx and NOR-DAQ Driver Support: PCI/PXI devices.  And LabVIEW 2011 is the latest version of LabVIEW that supports DAQmx 9.5.1.

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• New hard drive in the PC and now can not see child PC in the Family Safety website

  Recently, we had to install a new hard drive in my son's PC.  I can confirm Family Safety is on his account, to block Web sites are blocked, delays are granted, and there is curfew in place.

  But when I connect to https://familysafety.microsoft.com I see my account on the PC, but I can't see me son under kids account.  I followed all the links, help is here.  I deleted and then re-created his account, the computer is approved, and I can see Family Safety is on his account, but I still don't see the PC as part of the children's section of https://familysafety.microsoft.com.

  Rohit:

  The wiki article was not a solution - but thank you.

  The problem is finally resolved when I could access MS FS through the settings on the PC.  It has a link to MS FS in settings FS (user) who has been for several weeks.  This must have been on the side of Microsoft since after accessing this link work then all the features of the FS.

  Jason

• BlackBerry smartphones can not see memory card when connected to USB

  At the same time whe connected to the USB port I could choose 'My Computer' and see the memory card but cannot be.  I can't see also it when it is connected to the Desktop Manager.  The device is connected and sync, but I have you will not access the memory card.  The only change I've made lately lazy tent.  It worked fine for awhile, but I deleted the application to try to recognize the card memory again.  On the BB, I can see all the photos and music on the map, the only problem is when connecting to my laptop.  I put in mass storage mode.  Any ideas?

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals

• User with REPOSITORY_EXPLORER can't see repository work

  ODI 11.1.1.7

  We have two repositories - a job, a performance - and a user who is assigned the REPOSITORY_EXPLORER role.

  She can't see a repository when creating the connection. It connects to the correct master.

  Must be missing something obvious, but I can't understand it.

  Thoughts?

  -John

  You must provide to connect to the profile. You can even put a restriction more log on to the profile (if you want to opt for natural gas) by removing the profile of the specific object methods.

  Thank you

  Chantal

• Cannot configure the BPM MDS connection in JDeveloper

  I am trying to set up a connection to MDS of BPM in Jdeveloper
  
  Here's how I do it:
  1. in BPM MDS Navigator set up the connection.
  2. click on add a connection to the wizard
  3. as I have no SOA MDS connection can't created, click Add to add the SOA MDS connection.
  4. in the MDS SOA, SOA MDS connection correctly connection wizard created.
  5. now, this created SOA MDS connection does not appear in the menu dropdown and I am not able to proceed further with the creation of BPM MDS connection.
  
  Tried to restart Jdeveloper and refreshing so this does not help, as the SOA MDS connection created is visible in the IDE connections palette but not is not in the drop-down for the configuration of connection MDS BPM.
  If you'd be grateful if someone can help on this.
  
  
  Thank you
  Wajid
  
  *****************************
  Resolution:
  
  Ensure that the Weblogic domain created had the possibility of BPM Suite verified.
  
  ****************************
  
  Published by: Carole Wajid on 22 September 2012 18:49

  So here is the solution

  The problem was with my weblogic domain , I did not create domain included Suite BPM[while the creation of the field made sure the BPM Suite is checked].

  Resoultion->
  Created a new domain with BPM Suite and it worked like a breeze.

  See you soon,.
  Wajid

• Problem setting BPM MDS connection

  Hello

  I'm trying to configure connection MDS in BPM.

  I configured a DB and SOA - MDS connection for the DEV_MDS scheme with success. But when you try to configure connection for BPM - MDS using the pre configured connection SOA - MDS, I get the error below.

  Test Failed: BPM-80104: error found.  Cause: An error occurred during the Migration of security role BPM.

  I'm missing something.

  JDev - 11.1.1.7 with SOA and BPM installed extensions.

  BPM Suite 11.1.1.7 installed on the server and the necessary schemas are created using the remote control.

  Ask members to help me in this

  Thank you

  SAI

  SOA-infra app is down, once it is up, connection is established successfully.

• Is it possible to deploy bundle SOA on the custom MDS that was added manually?

  Hello Experts,

  I want to know the following scenario is possible.

  (1) create the new SDM repository using the remote control.

  (2) save the MDS in soa-field.

  (3) add the new partition in the MDS.

  (4) deploy some bundle SOA with WSDL, XSD and so on.

  (5) implement composite new services included in the bundle SOA of the MDS.

  1 ~ 3) seems possible.

  But I don't know how in the specific MDS which is not SDM - soa.

  Please check the script and let me know something wrong or how to deploy an SOA in MDS custom bundle.

  Thanks in advance,

  BmW

  I also got a response from the Oracle and share it here.

  "There is no way to have the mds shared between multiple areas of Soa." "You would have to maintain separate but equal mds copies (I mean just like xsd/wsdl metadata, not composites).

• problem with deployment of SOA Composite

  Hello
  
  We have created a SOA project containing a composite SOA.
  
  When we try to deploy of Jdeveloper, was not getting deployed successfully. It was not showing any errors, and there is no error in compilation as well.
  
  The deployment is make failure showing the following message.
  
  [05: 37:32] problem in sending HTTP request on the server. Check the standard HTTP response code for 504
  [05: 37:32] archives sca_DelAtRiskProj_rev1.010.jar to soa_server1 deployment error [rws60045rems - vlan1.us.oracle.com:5002]
  [05: 37:32] HTTP error Code returned [504]
  [05: 37:32] no error message is returned by the server.
  [05: 37:32] # incomplete deployment. ####
  [05: 37:32] error deployment archive file:/slot/ems3763/oracle/soa/workspace/SandR_DelAtRisk/DelAtRiskProj/deploy/sca_DelAtRiskProj_rev1.010.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  The Jdev version we use is 11.1.1.1.0
  
  the SOA version we use is version 11g GA
  
  Please let us know, what could cause this error or if there is another way by which we can continue with the deployment process.
  
  Any input onthis is much appreciated.
  
  Thanks in advance for your time,
  Regnier

  Raj,
  To get this thing working, follow these steps:
  The customer jdev machine you ping your server, it will give you an IP address.

  Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.

• Enterprise BPM - can see the deployment

  Hi all
  
  
  
  I'm new to BPM and I am deploying bpm company and I hope that someone could help me
  
  I have installed and configured all the necessary elements (weblogic server, enterprise bpm, bpm studio) and I configured and I created a directory of bpm service, bpm field, etc. (using the Setup Wizard)
  
  I'm trying to deploy a sample proyect. I followed the guid of the admin and I deployed using process administrator-> projects, deploy etc (I used the smart option publish)
  
  How can I access my deployed application?
  
  I've accessed the application workspace (while I have administrator privileges and I can see all deployments using the admin account) and I don't see my deploy :(
  Am I missing or something wrong?
  
  Thanks in advance to all :)

  Hello

  In the web-based Administration tool, add a participant 'test '. Assign this participant all roles within your process.

  Connect to the workspace by using the new participant. If it does not try to start and stop the engine of the process Administration tool.

  Hope this helps,
  Dan