Can't the bios utility.

Similar Questions

• LSI Logic SCSI Ultra320 RAID Firmware and the BIOS utility. Cannot make the diskettes.

  I downloaded the pack sp29637 for Firmware LSI Logic Ultra320 SCSI RAID and the BIOS utility to my Workstation xw 8200. I'm doing a disk from the downloaded file. I runs the file, but when it tells me to put a floppy disk in the A: drive and I confirm, the window closes and the diskette is not made. Looks like the copy in the file program is corrupted.
  Does anyone have this already developed package files so I can copy them to a floppy disk?
  The files are supposed to be the following:

  Hi Sasi,

  Yes you are right. Then, I realized that I could open these files using Winzip or Winrar. I thank very you much for responding to my post.

• Brand new Aspire E11 (E3-111) brick by the BIOS utility official Acer - what now?

  Yesterday, I bought a new netbook for my girlfriend. I decided to make sure that the netbook is using the latest BIOS and latest drivers. So I downloaded the BIOS utility official support page (http://www.acer.cz/ac/en/US/content/drivers/5329;-;) Aspire 20E3-111%), extract BIOS_Acer_1.05_A_A.zip and launched BIOS_Acer_1.05_Windows\ZHJ_105.exe.

  The utility began to update the bios without asking (!), the system has been rebooted and I also saw a progressbar finishing 100%. Then I waited... nothing (battery was full and connected to the AC). Now, the netbook is dead. Power button does nothing.

  Is there something I can do before I go back?

  My broken netbook has been replaced by a new. You can be sure that I won't try updating the BIOS again ;-).

• Keyboard does not not on the desktop, but I can access the BIOS

  I have a desktop Compaq Presario SR1220NX w / XP SP3. Using the keyboard I can access the BIOS (F1), but it stops working when I get on the desktop. I tried 2 P/S, USB, wireless keyboards (they are all worked on other computers) and they do not work once I get on the desktop. When I press a key on the keyboard they make a thud. I have the latest version of the BIOS.

  I have reset the BIOS to its default settings, but it does not solve the problem.

  Any suggestions on how to solve this problem would be appreciated.

  Can you start in SafeMode (f8) on the blue HP screen?  If you can, then you might try to return to a well known system restore point.

• The BIOS utility 600th for linux (or boot back disk)?

  Hello

  I need to completely disable the IrDA and put ttyS0 Serial port (COM1). How?

  Assuming I need to the BIOS Configuration utility, but I found no linux version. Or BACK-version that fits on a floppy 1.44 ".

  ttyS0 was working well until I decided to update the kernel (bad idea!) A good point is that now I am able to monitor the status of the battery but ttyS0 dies which lead to situation that gammu smsd is not more work.

  Any help would be more than welcome!

  BR

  Miha-

  Problem solved. Booted from CD http:/miha.webhop.net/600E_BIOS_Configuration.iso

  and then sequence of commands:

  Disable imodem PS2

  disable the ir PS2

  disable the PS2 Sera

  Sera PS2 address 1 (= ttyS0 COM1)

  enable PS2 serums

  And restart. Now, serial port works again. Detective Conan.

• Can't the BIOS Setup

  I have a HP Envy 700-010xt

  I tried to add a secondary disk to start linux CentOS 7.0.

  I don't know what happened, but I tried to change e BIOS to select the CentOS as main boot drive.

  Now, when the computer comes on, the keyboard active briefly and then it crashes. The only thing I can do is press the power button to turn off the machine.

  I don't know how to get into all the BIOS at this point start menus. It blocks just whenever I turn it on.

  / Ellen Cassie

  Hello

  Try to clear the CMOS or pulling on the battery settings. Shut your PC down, pull the AC power cord and remove the Panel from the turn right to access internal components.

  Please see here for the location of the battery on the motherboard and the CMOS clearing instructions (riders). HP reverse the motherboard during the installation of the tower.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• How can I get a supervisor password prompt to appear so I can configure the BIOS?

  I have a T60 that will not allow the configuration of the BIOS. It is locked and says to see the administrator.

  When I press F1 to access the bios a poweron password prompt appears. I press on enter (cause no password) and I am stuck in the BIOS. But it won't let me edit anything (read-only). How to enable the configuration?

  The power on password prompt is the same as the supervisor password, or vice versa if you wish. Have you tried to enter the password for the supervisor to the command prompt?

• Can't do the BIOS update for Portégé R500 (PPR50E)

  I have a Portege R500 PPR50E with Vista Business pre-installed model. I am wanting to move to Windows 7 and so initially I want to update the BIOS of 1.5 to 1.6. I got the correct file from Toshiba (bios-20080325071859 containing P0058v160.exe), but when I try to run the application, it fails with "this computer is not supported.
  I checked several times that I downloaded the file for the R500.

  Can anyone help?

  Hello

  That s strange.
  Did you change something on you installed Vista?

  In different cases, the BIOS cannot be updated because some essential tools such as the common modules for Win XP has not been installed.
  If you are using vista you don't need common modules but I recommend reinstalling the VAP.
  Then you should try to rerun the update of the BIOS.

  Otherwise use the recovery disk and computer laptop back to factory settings.
  After the laptop has been set to the same State as on the first day of purchase, you can run the BIOS update.

• Can not enter the parameters of the BIOS on my Qosmio F30-112

  Dear lovers of Qosmio,

  Since I have updated Bios version 3.60 - winning, I'm not able to access my BIOS. I turn on my laptop while pressing ESC I get SYSTEM CHECK. Press [F1] to enter the bios. I press F1 , nothing happens, I pressed it several times the same thing. It's not like my Qsomio f30 - 112 made problems or anything else I want to be able to access my bios, who knows.

  Can you please help. by the way I tried 100 times > _

  Dear Hamid is very strange and at the same time stupid situation. I don't really know what the problem is here. Computers laptop Toshiba usually have 2 different BIOS versions. One is defined as Toshiba BIOS and secondly is Phoenix BIOS. Your Qosmio definitely has this version of the Toshiba BIOS and you can enter the BIOS settings using the keys F1 ESC.

  If possible try to call the service authorized in your country. If you can not enter the BIOS settings you need of some explanation expertise. If you will get some info useful please share it with us.

• Satellite A300 (PSAJ0E) - update after the BIOS, I can't start

  Hello

  I have an A30, and I tried a bios update to 4.2 which is the latest version for my model. BIOS update went well spent, that it prompted me to restart the laptop once the process is complete, but after this, I was not able to start. I made the screen where I can enter the BIOS Setup (that I can actually do and I am able to change the settings and save them) but after that the screen goes black and it crashes.

  At first, I thought I did something wrong and upgrade does not work well, then I started looking for the bios crisis recovery methods, I found this article:
  http://CRD.Y1.cc/
  After the steps, I managed to get my USB floppy drive works and, hopefully, flashing the BIOS, but it didn't help it would always hang at the same stage.

  My laptop has a warranty expired, so I can't fix it for free, and the service will probably cost me half of its price. Is there anything else I can do to get it fixed?

  I thought to Flash an older version of bios - perhaps the last 4.2 is not really compatible with my model, but I couldn't find everything... is it possible to get an older version of bios and give it a try with a floppy drive?

  Thank you
  Anton

  *@DCRM*
  You have a laptop A300D. It s a series different and, therefore, you couldn't t use the BIOS files designed for A300 series!
  This may damage the module ROM and mobo!
  You can find the latest version of the BIOS on the Toshiba European page of the driver... otherwise, you will need to contact the ASP in your country for assistance, or an older version of BIOS.

• Satellite A100-178: I can reinstall the older version of Bios?

  I updated my Bios as it was available (5.10). The update went well and I had no problem for it. Since then, I started to get a daily error messsage on digital USB card from Pinnacle. The error is something about the limitations of outdated peak current. The card still works OK after that I have reinstall. I would like to try it with the old version of the Bios and see if that also produced the error, but that is downloadable somewhere?

  I noticed the update made a program to copy backup, but where? I also tried to run the update process twice, so it may be that the backup copy has been crushed with the new version anyway.

  Thank you
  Petri

  Hello Petri

  With your laptop you can do what you want, but if I were you I won't play with BIOS if not necessary. I hope that you know very well that if you make a mistake, you can destroy the BIOS chip and in this case you have big problem because the repair will be very, very expensive.

  I'm sure that the BIOS updates are tested before you can download them and are perhaps better to look for other solutions as described in the previous announcement.

  Good luck and be careful!

• Satellite L455D-S5976 not found so I can't get the BIOS or downloads

  l455d-s5976 is not found on this site, so I can get the bios or downloads.
  I even put in the serial number and which did not either.
  Can not say that fills me full of promise that ill get the help I need.

  I want to update bios in the hope that it will solve my problem.
  My problem is the laptop overheating and closing, according to some investigations it seems that the fan does not pick up speed when it is hot. Fan works, just at lower speeds, strange thing, it seems to run a lot faster when I switch on the laptop and it starts.
  No idea if the bios update can help but its something that I want to try.

  This seems to be US model so try please find it on http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  Good bye

• HP 15 f024 wm Notebook: How can I downgrade the bios on my laptop HP 15-024wm?

  Hi, I just bought a laptop from HP 15 f024-wm.  It runs 8.1 64-bit Windows. Intel Pentium 3520 N.   The problem I have is that I've recently updated my bios to f.13 and now my keyboard skips letters. Everything was going well until I did this upgrade of bios, how can I downgrade to the original version? I tried the key windows + B thing and she does not see a black screen while my caps lock key blinks twice.  It drives me crazy... If anyone can help me I would appreciate it a lot. Thank you!

  Hi @vincentd1215 ,

  Thank you for visiting the Forums HP's Support and welcome. I understand you want to restore the default values of the BIOS. You can restore the BIOS with this document by selecting the reload the default BIOS settings or rollback. Restore default BIOS is necessary, if it does not give you the possibility of restoration.

  Hope this is what you need.

  Thank you.

• If the OEM license is tied to the BIOS, the BIOS can be updated without problems?

  I think to update my Vista 64 bit on windows 7 laptop.  I was reading the Ant on the differences between OEM and full, and in a post, it said that the OEM license is tied to the BIOS serial #.  Is it a serial number of the equipment of a firmware #.  What would happen if you fast a new BIOS revision?

  Thank you

  a preinstalled OEM SLP key should interact with the slic table in bios in order to activate itself. You can update the bios without negative consequences as long as you get the bios that is appropriate for your machine.

  An OEM system builder license does not use the slic table.

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Where can I download the HP utility that can be used on Mac Mountain Lion 10.8?

  I can access my printer but you don't have the HP utility. In 10.6 I could use the utility to calibrate the machine and make diagnoses. I don't want to get the machine by doing a full installation - I don't want to as the utility. Thank you!

  Hello

  You also can maintane the printer through the EWS page via your web browser, so you can do this from the HP utility.

  You can access the HP utility by adding a HP driver:

  • Under printing & scanning click on the button "+".
  • Select the CP1025.
  • Click on the dropdown next to the use.
  • Select the model of the printer default AirPrint option instead.
  • Click on Add.

  The driver should be fethed of Apple servers, then you can access it by clicking the print queue of the printer twice and selection of parameters, under the utility tab click the HP utility button.

  So, you can install the software on the HP site, the HP software for your printer includes the HP utility, other components such as HP product improvements can be ignored during its installation.