How can I get a supervisor password prompt to appear so I can configure the BIOS?
I have a T60 that will not allow the configuration of the BIOS. It is locked and says to see the administrator.
When I press F1 to access the bios a poweron password prompt appears. I press on enter (cause no password) and I am stuck in the BIOS. But it won't let me edit anything (read-only). How to enable the configuration?
The power on password prompt is the same as the supervisor password, or vice versa if you wish. Have you tried to enter the password for the supervisor to the command prompt?
Tags: ThinkPad Notebooks
Similar Questions
-
Sam S300 - how to get full Supervisor Password Prompt to enter BIOS?
Have a Satellite PRO S300 (PSSB0A - 06500T), who is with Stop 7B BSOD-ing and I go into the solid part of the BIOS so I can reset the boot order to allow me to re - install Win XP.
ESC - F1 puts me right in the small part of Page 1 of the ACPI BIOS configuration. I know the supervisor password! So, how do to a password prompt that will allow me in the two pages of the configuration of the BIOS.
I tried F12 at startup to enter the boot options on the Toshiba splash screen, but it does not work.
I think you hold a key in the market. Try holding the "INS" key to get the supervisor password to appear prompt.
-
I have sony vaio E P14 with windows 8, but I can't go to the bios affecting somehow I try F1 F2 ESC LED more keys but always pass the windows how can pass the bios?
Shut down the computer, tap on help key on the upper right corner of the keyboard, which will turn on the computer and gives the boot options. Not easy, but it is documented.
-
How doe I get my addministator password as I have lost
How doe I get my addministator password I forget my laptop of the education of the sons
Keep passwords secure - Microsoft on passwords strategy
http://support.Microsoft.com/kb/189126What to do if you forget your Windows password:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-passWOrd
-
How can set the background color of the status bar?
Quote from the old forum:
Comments: comments How can set the background color of the status bar? Posted the: July 17, 2008 02:56 How can set the background color of the status bar?
Using this code for the status bar:
LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER)
{
int _backgroundColour = Color.LIGHTGREEN;
public void paint (Graphics g)
{
g.setBackgroundColor (Color.RED);
g.Clear ();
Super.Paint (g);
}
};Font defaultfont = Font.getDefault ();
Police smallfont = defaultfont.derive (Font.PLAIN, 12);statusField.setFont (smallfont);
setStatus (statusField);When I ran the code you have above, my status background color was red. Is not what you see? If so, please provide the BlackBerry model and software version that you are testing. You can find this under Options.
Or if you try to do something else, please provide details.
I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).
To do this in version 4.1, first call getColor and save the current color. Then call setColor, setting the color to the color you want to use for the background. After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this). This must fill in the field with your specified color.
To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.
-
How can position the keyboard to the bottom of the screen?
How can position the keyboard to the bottom of the screen? Please see screenshot below, the keyboard is not at the bottom of the screen.
Press and hold the keyboard at the bottom right of the keyboard icon. A window pop up that will have two options - Split and the Dock. Click on the option to dock alongside re your keyboard at the bottom of the screen.
See you soon,.
GB
-
How can I enter BIOS compaq610 screen and set the date, time
How can I enter BIOS compaq610 screen and set the date, time
Hello
See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.
Kind regards
DP - K
-
Pavilion 11-n008tu: How can I enter Bios on Pavilion 11-n008tu?
How can I enter Bios tried to type f9, f10, and esc on reboot, but always just goes to the login screen without visibly through the startup script. I want to start a cleaning hard drive so can send mobile recyclers
Hello
Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.
Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu. If this is the case, select f10 to open the bios menu.
Kind regards
DP - K
-
How can identify the real space in my SGPT123 Tablet?
Hello
How can identify the real space in my Xperia Tablet? I can see only 10.0 GB, if suppose has 16 GB, where's the rest?
A space is medical, the Android operating system and recovery Partition.
-
Title: original passport / BIOS
Does not start with Passport attached to the USB port... Said to eliminate "USB boot" from the BIOS. How can I access BIOS? The support fellow WD told me to push "F10" at the start, but it just sent me multiple choice starter.
Depends on the brand and model of your system. When the initial screen, you should see similar instructions to "Press F1 to enter setup". F1 is just one example. It might be F2 or DEL or any other key. You disable and then boot from a usb device. The problem should be solved.
-
Something's happened awhile and when I create a folder which appears the first column is the column 'Date modified '. By default, how can return the first column 'Name' without having to move it manually every time?
Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_4
http://Windows.Microsoft.com/en-us/Windows-Vista/folders-frequently-asked-questions
It will be useful.
-
How can see the motherboard serial number in windows 7
Salvation;
I need how can see the serial number of the motherboard in windows 7I look forward to help meThank you...You will most likely need remove the left side panel and look at the motherboard to determine the serial number.
-
How can I save BIOS Firmware on G60-243DX
How can I save BIOS Firmware on G60-243DX
does anyone know of a tool on the net.
My G60-243Dx has a F.33 BIOS. It cannot be that. latest version of the BIOS is F.32A.
I think that geek team at best buy, updated with incorrect firmware.
There is no available tools to save it... and I doubt that they flashed the BIOS of your laptop with the bad because the software will not Flash the BIOS, if it does not. As well, it probably doesn't work very well if it was the wrong version. HP site is sometimes behind the posting of updates... service centers probably have the latest versions.
-
Original title: Desktop
Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8 rather than having to go from the first layer redundant 'start-up '.
In fact, if anyone can tell if there's a free windback to an earlier version of Windows (7) who has not all layers unnecessary and icons, I would be really grateful
Your best bet is to switch to 8.1, that allows you to boot directly to the desktop, and then use a menu like debut8 to replace the old Start Menu and hide the side of the metro.
If your computer comes with Win Pro 8, you may be able to demotion, otherwise, you will need to buy 7. Before you buy 7, I would recommend go to the computer manufacturer's website and see if there are any Windows 7 drivers for your computer. You may lose certain functions - sound, network, video full resolution - if there is no driver.
The first option is easy and allows you to keep the improvements in performance and safety 8.
-
How can change the end of thick disk when a virtual machine has been placed on the disk?
After you have moved the virtual computer to another stage, chose the thin disk bad. Now, the virtual machine cannot start. the error message says that it must be thick for clustering. So, I need to change it back if possible. Then I moved it back and thick chosed. But, after that, I got a same error. So, after you move, the atatuse disk was not be changed. Is it a way not both directions? How can change the staus thin to thick?
Thank you!
George
Hello George,.
You can also convert virtual disks in eagerzeroedthick from the command line.
vmkfstools-j VMname.vmdk allows to convert a thin disk in eagerzeroedthick
vmkfstools k VMname.vmdk that will do it on a thick disk
It can also work for a thin disk, click with the right button on the vmdk in browser data store, and then click 'inflate '.
André
Maybe you are looking for
-
Want to stop Firefox to display the thumbnails of Web sites visited previously when click on new tab
Since I use my computer for work and personal activity, and I do a lot of online meetings, it's a distraction and not professional to have a bunch of Web site thumbnails appears if I happen to need to open a new window while sharing my screen. There
-
Thurderbird opens 3 instances each time I open it. Why?
Whenever I open Thunderbird, it opens 3 times then runs very slowly. I uninstalled and reinstalled, but the same thing happens. How can I fix it. He used to work perfectly
-
Why tell me that Bing is already installed, when it does not exist on my computer?
I removed the Bing on my computer because I don't like it much. Given that Google has become such a useless piece of junk, I decided to re - install Bing, but whenever I try, I get the following message.Quiote:Firefox could not install the plugin 'ht
-
Hello I just installed the latest update on my ipad mini2 (run the latest version of iOS7) and I can't start Skype more. It crashes just after opening. any ideas? This can be corrected? Kind regards.