Can Tecra M9 - I put the HARD drive?

Similar Questions

• Can satellite A100 - I put the HARD drive with 7200 RPM model?

  Hello

  I have a Satellite A100-044, I would spend my the 120 GB HARD drive to a more large (250 GB or 320 GB).

  A 7200 RPM would work on this subject? It seems Web compatibility sites they show 5400 RPM more, I would like to set up my laptop for recording/mastering so music wants a fast machine, I don't really mind if it consumes more energy...

  Any thoughts?

  Thank you
  Stone

  Hello!

  Of course, you can swap the HARD drive with a model more fast using 7200 RPM. But as you say, it takes a little more energy. The new HARD drive should be a little faster, especially access time should be lower.

  250 GB or 320 GB should be possible; you need a HARD drive with SATA interface.

  I hope I could help a bit.

  Good bye

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• Re: Can Satellite A100-172 - I put the HARD drive?

  Im just wondering what what can I put the HDD for my A100? The hard drive now is a 120 GB and its useless at this point due to a problem I had with it.
  I thought I'd go with this one, but I don't know about policy of hardware upgrades from Toshiba.

  http://NCIX.com/products/index.php?SKU=42252&VPN=ST9320423AS&manufacture=se agate

  Thank you

  Valentine's day

  Hello

  I agree with Akuma. You must take the HARD disk at 5400 RPM. It should be pretty fast and produces less heat. It is good for office and multimedia applications.

  I hope you enjoy with your new HARD drive. ;)

• Can satellite M70-337 - I put the HARD drive?

  Hi all,.

  I have a Satellite M70-337, the vehicle currently has 40 GB of hard drive. The laptop has served me well and I want to upgrade the hard drive 100 GB +, anyone has done this?

  If Yes please advise on the type of hard drive required and their availability. I have 2 GB of RAM and want to run Windows 7 on this computer.

  Hey mate,

  Of course you can upgrade the HARD drive why not? :)

  AFAIK Equium M70 already use hard drives with Serial ATA interface. This means that you must buy a 2.5 HARD drive with this interface.
  For example, a 120 GB model should work!

  In my view, it is irrelevant, what type (manufacturing) that you choose. There is no major differences, but I have good experiences with Western Digital.

• Satellite 1900-303: can I put the hard drive 120 GB

  I have a S1900-303 and I think to raise the 120 GB hard drive. What are the problems, if any, are that I meet and I can do froom the Toshiba startup disk or do I just install XP from a XP disc?

  Hello

  That I myself remember Satellite 1900-303 has been delivered with the 30 GB HARD drive.
  So, in my opinion, 120 GB HARD drive size is too big and I presume that the BIOS of the laptop will not recognize the HARD drive!

  I think you can use a 40 GB, 60 GB and a 80 GB HARD disk.

  PS: you must search the HARD disk with the IDE (ATA-5) increased!

  Good luck and have a nice day

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• How can I re name of the hard drive

  Hi I have the student version and Office 365 home installed on my mac - it is used via bootcamp and OSX. After each restart, I am prompted to activate my subscription, the password is not accepted as the software is already loaded on 2 machines. I must then connect to my account on the internet, disable the software online and then reactivate to access my desktop computer.

  Apparently, I need to rename the hard drive because there is a special character in the name of «-»

  How to rename the hard drive?

  Try the procedure to rename the hard drive

• How can I block access to the hard drive to windows when the computer is blocked?

  When I leave the computer on and 'blocked' option it accesses the hard drive and "work like crazy. Simple I want to block all the software to access the disk hard until I connect again.

  I want the computer to be available on the network, but does not.

  Thank you

  Sorry, but that is simply not possible.  Each computer doing something, if you're connected or not, each tick every millisecond it's on.  If you could freeze the process somehow, you would also freeze the processes and services that would allow you to access the network. Better, we advise to leave it alone, lock to prevent others from accessing and then do what you need to on the network.

• Put the hard drive Dell studio xps m1530?

  My dell studio 1537 laptop computer does not light so I bought a second hand xps m1530... the hard drive of the studio is suitable for the xps and it would work ok?

  The drive works at the hardware level - you will need to reinstall Windows and all your programs and restore your data, however.

• Recovery partition on Tecra M5 deleted from the HARD drive

  Hello
  I deleted by mistake the partition of my drive (about 2.3 GB, FAT32) recovery system hard.
  What should I do to create this return.
  It will affect the performance of my system, although I have recovery DVD created previously.
  Is it possible to create this partition recovery DVD or I need to consult with Toshiba.

  Hello

  Sorry, but your ad is a bit confusing to me. Can you please explain exactly what you want to do and how it looks like on the HARD disk partitions now?

  You have two partitions (C and D) up to now? Which partition is deleted now?

• How to access the files after you put the hard drive in the external case

  I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of money, "with no warranty.  When I try to access it using the security feature to take possession of the files, they always come to the top an unauthorized.

  Hi martinez_gerald,

  In addition to the suggestion of Chafflube, you can consult the following KB articles and check if it helps.

  1. What is the exact error message you get when you try to access the files?

  You can read the following article and check if it helps:

  Error access is denied"when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Also read the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I move files from the hard drive of your computer to external hard drive.

  Original title: can I add an external hard drive to transfer music from windows media to free up space on the top of the Tower

  with windows media player to manage two mp3 players, running out of space on the top of the Tower, can I transfer and store all the music files on an external hard drive of 1 TB and use windows media player with the external hard drive?

  Hi PaulDocherty,

  I suggest you follow the methods given and check if it helps.

  Method 1: Please run the synchronization in your Windows Media Player.

  Please visit the link below to make a synchronization in your Windows Media Player;

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Method 2: You can also try to copy and paste option.

  Please visit the link below to copy files to your files on an external hard drive;

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  I hope this helps.