Can VMware View - I connect with Microsoft RDP?

Similar Questions

• Login to view server does not accept connections from Microsoft RDP

  Hello everyone and thank you for taking the time to help me in my attempt to jump into the world of the VM.

  I managed to get everything up and running with little trouble, but I'm a bit confused on the subject of clients.

  I understand that the PCoIP connection method is preferred... but I want to better understand the methods of connection and keep soft things as possible.  Being as I'd like to be able to connect to the pool by using the customer view and Microsoft's RDP client provided with windows, but I meet an obstacle.

  My office pool was initially set PCoIP preferred, but allowing users to substitute... I could not connect via the view client no problem for my pool of offices not persistent, but not with the Microsoft RDP client using the address of the connection manager.  If I put the IP address of one of the XP VM in the pool I can connect via RDP, but not via the connection manager.

  I get the pool to be favorite RDP that allows the user override... no change.

  So I'm confused as to how it works... is the connection broker/manager only work with the client of the view, or I would be able to connect anyway?

  Am I missing some setting?  I did my setup based on the 'evaluation' guide, then maybe there's a checkbox miss me.

  The pool works seamlessly with VMware view client but not MS RDP. Pointers on where to find would be greatly appreciated.

  Here is my config of pools:

  Number of workstations (at a minimum): 10

  Number of workstations (maximum): 10

  Number of workstations (available): 2

  Stop commissioning error: Yes

  VM naming pattern: NPVM

  Tags: all the

  What VM is not in use: do nothing

  Turn off and remove the virtual machine after the first use: No.

  Automatic disconnection after disconnection: never

  Allow users to reset their desktop: false

  Allow multiple sessions per user: No.

  By default the display protocol: Microsoft RDP

  Allow users to override the default protocol: True

  Quality of Adobe Flash: do not control

  Adobe Flash limitation: disabled

  Josh

  Chicagojsh001 wrote:

  ITTech2002, in your response you said

  «No need to use the MS RDP Client directly, but it is a good work-around if necessary.»

  You say that you cannot connect to the pool of offices with the help of MS RDP, rather you need to connect to PCs by IP address rather than the broker for connections are so?

  View client appealed to RDP and PCOIP according to which selected protocol.  The display client uses the broker for connections to allocate your session, provide the usb redirection and map printers.   So in a sense, you can use RDP with the broker for connections with no problems, but there must be through the client view.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• I can't ipwebcamto to connect with my computer

  I can't IPwebcam to connect with my computer

  Hi, Robert,.

  See if this helps:

  How to connect to an IP camera

  http://www.ehow.com/how_5598641_connect-IP-camera.html

  http://androidflip.com/how-to-use-Android-webcam-PC-USB-wireless/

• What version of VMware View is compatible with vSphere 5.1?

  Greetings,

  I checked the compatibility tables and I watched that indicated that no version of VMware View was compatible with vSphere 5.1.

  Tom

  You will have to wait until VMware releases a hotfix or an update that is compatible with vSphere 5.1. Usually short gap between the release of vSphere and a compatible version of the view.

  André

• Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

  When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

  I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

  Can you suggest anything?

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  The above information on the problem is explained in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• VMware VIew 5.3 with SQL 2008 R2 Express

  Hello world!

  I'm about to deploy VMware View 5.3.

  I'll use a linked clone pool with 100 workstations.

  Can I use SQL 2008 R2 Express X 64 for the composer?

  Y at - there any restrictions I can find in the future?

  Oh, I give bad link VMware View the database to screen sizing & #187; myvirtualcloud.net . Yes, he should be allowed to use Express even for 100 clones, but only for the View Composer database. AFAIK it is recommended not to use SQL Express for vCenter database if you want to run more than 50 virtual machines, BUT it is old recommendation and with the current SQL Express limited 10 GB and 1 CPU or 4 cores, you can also use it to vCenter database I think.

• Installation of the SDK to allow VMWare View to connect to VC - how?

  Hello

  I installed the server VMWare View connection, but when I try to add my VC, I get a connection error. I checked the firewall ports and traffic becomes to my VC so I don't think that's the problem. I checked the event log on the server VMWare View connection and try to connect to http:// < virtualcenter >: < port > /SDK

  I guess this way tells me that I need to install the SDK. I downloaded it, but the installation instructions are not clear, and I find nothing in the installation guide for VMWare View to help me.

  Can someone advise or give me a detailed guide on what do I do?

  There is nothing to install. The URL... / sdk will give a 404 error, it is not used as-is. For example, I've seen configured to point to the VC:

  Server address: vc.mpryor.int

  User name: administrator

  Password: *.

  Connect using SSL: true

  This will save the URL https://vc.mpryor.int:443 / sdk in ADAM and use it. Navigation it will give me a 404 error, but I assure you that I'm using without problem.  You must have a network issue - check firewall, proxy server (for the machine, not your user account) and DNS.

• Problem in installing VMware View Server connection

  Hello

  As the first step to install the VMware View Manager, I tried to install the connection to the VMware View server on a virtual machine to Windows 2003 Server SP2. This machine is added to a domain under our Windows Active Directory. I can connect to the machine using user accounts that are on the directory to active directory. My problem is that when I try to install the view connection server, I get an error message indicating

  "The computer is a member of a domain, but no server connection was found. Please make sure that the computer is properly connected to a domain and that a domain controller is available before to perform this installation again'.

  Because I can log into the machine using accounts in active directory, I assume that the computer is properly connected in the field. I also confirmed that there is a domain controller in active directory. I tried to do the installation under an account that has administrative privileges for the object active directory, but also a local administrator account. Could someone suggest where I could go wrong?

  Thanks in advance

  Concerning

  Varun

  You have validated that DNS and WINS are configured correctly on the server you are trying to intall the broker for connections on?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Firefox and safari... can not establish a connection with the server of http sites

  Hi I have a mcbook pro loaded with OSX X Yosemite 10.10.3. For some time on safari and firefox I can access https sites only and get an error message "Unable to connect", then then specifically line "Firefox can't establish a connection to the server www.seek.co.nz.

  On the same network, I have an iMac OSX X Yosemite 10.10.5 running and can access http sites that my laptop will not. I compared the network settings and they are identical, I disabled the extension and erased the caches, but always without success. Any siggestions?

  Hello. Take a look at this article, maybe this will help you. OS X Yosemite: If you can't connect to the Internet

• My hard drive crashed and I can't get in touch with Microsoft because they want a product id and the number I have is not working. Help!

  I've had my laptop for several years and a week ago, the hard drive crashed. So, although I had all my photos and movies and other saved, I lost Vista. This wouldn't be a problem if I could find the disks that came with the computer at the beginning, but I've moved several times in recent years (college) and I can't find them. Anyway, I'm now trying to get in touch with Microsoft to get a new drive, but they won't talk to you unless you can provide a product key.

  There is a product key on the back of my laptop, but their system apparently doesn't like it and so they're going to make me pay $ 50 just to send someone. Someone knows how to bypass the product key thing, so I can get a customer support?

  Thank you
  Chandra

  Hello

  as vista came preinstalled Microsoft do not offer FREE support for this issue of yours. That is why the price of $50.

  and they ask for a product ID, not a product key that you mentioned; but who has the same result; no free support

  Product ID is completely different from the product key

  your support is the manufacturer of your laptop; but feel free to ask questions on these Forums

  to reinstall vista:

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Installation of VMWare view client issues with 64 bit Win8

  Hello

  I am trying to install VMware view client to access my VDI but I get the error message below... tried to install different products VMware, that nothing has worked... pls help.

  

  Its best you post your question in the following forums:

  Welcome | VMware Communities

• I can't view the oracle with sysdba password

  Hi all
  
  I run "select PASSWORD from dba_users" and the result is empty. I have 11g r2. Is it possible to display user password?
  
  Thank you
  
  NY

  You can still view hashed password by directly accessing the table used by http://hrivera99.blogspot.com/2011/01/where-is-password-column-from-dbausers.html view DBA_USERS.

• If I install Thunderbird for iOS on my ipad, can this version automatically connect with my version already installed Windows PC - sharing of addressbook, templates

  Hello

  Last fall, I installed Thunderbird for Windows on my PC. I'm very happy with it and plans to install the version for iOS on my ipad. I wonder if 2 versions would be able to communicate with each other. Specifically, they will be able to: share address books (I have an address book very large on my PC version and want the ipad version to access), models (have several designed on my PC that I wish I could share), share records of messages sent and received between the two versions, etc. Is this possible? Please let me know. Thank you!

  -Ludivina.

  Mozilla.org doesn't have any version of Thunderbird and Firefox for iOS due to Apple restrictions on JavaScript and browser engines that can be used.

  Development of Thunderbird is a lot less now because it is not yet a version of Tb for Android when Mozilla has of Android versions of Firefox since Firefox 4.0.

  Mozilla has that Thunderbird/Firefox for Windows, Linux and Mac OSX desktop. Firefox Mobile for Android and the Firefox OS for phones.

• How can I view and connect my PS2 (play station) on Qosmio LCD?

  Hello

  I bought a Qosmio F25 and I tried to connect my PS2 to view it on the LCD screen. I connected the PS2 for the Composite video cable and I tried all channels on television but did not display channel?

  I did the right thing, or miss me something?

  (P.S. I tried to treat the PS as a box and tried to use the media center to configure and analyze for the channel but apparently sandbox model must be inserted and that's where I stopped)

  Appreciate your quick support

  Thank you!

  You have installed on your machine Qosmioplayer?
  Have you tried to scan all channels on Qosmioplayer?

  The TV or VCR signal is the same as on PS2. Admittedly somehow.