Can we use the output of a report as input for the other report?

Similar Questions

• Re: Can I use the other Satellite U400 series recovery disk

  I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
  later I got to know that Windows Xp is not Geninue one. :|

  I can still see one of the Partition 'D:' with folder HDDRecovery inside.

  So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

  In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

  Please one of you let me know if you have valuable contributions on this.

  suggestions are welcome!

  Thanks in advance.
  wassim :)

  Post edited by: Mikael

  Hello

  I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

  Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

  By the way; You can order the CD from recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Whenever I use default Firefox to view full screen that I can't get to without abandonment of the application because I can't use the other controls

  It never happened until a couple of days and I knowingly did nothing to put it. I also just now uninstalled and reinstalled Firefox but that did not help anything. My internet explore and all other applications work fine. Only in Firefox now automatically going to display full screen when I launch the application it and I don't know how to get out except by giving up using ctr + alt + delete

  Hello

  Try to push the F11 on the keyboard key. This should be a keyboard shortcut to enable / disable mode full-screen. I also give you a link on how to enable the mode full screen and turn off.

  How to make Firefox and Web sites to go full screen

  Let us know if this solve your problems or not.

  Blunder

• Can I use the Report Builder freely in a commercial project?

  Can I use the Report Builder freely in a commercial project?
  If this is not the case, can what kind of clearance I get?

  N ° you need a reports developer license which is part of Developer Suite. And you need a license for the deployment of your reporting environment.

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com

• Why can't I click on some parts of my screen only if you are using firefox. I can not use the upper part of my scroll bar, but can use the background. I cannot click on the top of all sites, but he can click on any part of the site.

  If you use firefox, I can't use my up arrow of the page or click on the upper part of the scroll bar to make it move. Can I use the middle and the bottom of the bar. Also, I can't click on some items that are on a certain part of a web page (upper part). When I use firefox to open my email the same thing. I can't click on the upper part of the page e-mail delete tab, check e-mail tab, etc. However, I can click on it when I use internet explore so I don't know if it of a firefox issue or not. Thank you

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• I can't use the oracle11g adrci to run a command

  TITLE:
  -------------------------------------------------------------------------------------------------
  I can't use the oracle11g adrci to run a command
  
  ENV:
  -------------------------------------------------------------------------------------------------
  oracle11g production (version 11.2.0.1.0 version of Red Hat Enterprise Linux AS 4 x86_64)
  
  The snapshot command
  -------------------------------------------------------------------------------------------------
  adrci > view home
  Houses of ADR:
  diag/rdbms/orcl/orcl
  adrci > see command
  DIA-48101: error occurred when attempting to read a file [block] [opt/oracle/diag/rdbms/orcl/orcl/metadata/ADR_CONTROL.ams] [0]
  DIA-27072: Message not found 27072. product = RDBMS. installation = DIA
  Linux error: 22: invalid argument
  Additional information: 4
  Additional information: 1
  Additional information:-1
  
  adrci > problem
  
  Home of ADR = / opt/oracle/diag/rdbms/orcl/orcl:
  *************************************************************************
  0 rows read
  
  adrci > view report hm_run hm_run_1
  DIA-48101: error occurred when attempting to read a file [block] [opt/oracle/diag/rdbms/orcl/orcl/metadata/HM_RUN.ams] [0]
  DIA-27072: Message not found 27072. product = RDBMS. installation = DIA
  Linux error: 22: invalid argument
  Additional information: 4
  Additional information: 1
  Additional information:-1
  
  Published by: user649619 on January 23, 2010 04:46

  user649619 wrote:
  TITLE:
  -------------------------------------------------------------------------------------------------
  I can't use the oracle11g adrci to run a command

  ENV:
  -------------------------------------------------------------------------------------------------
  oracle11g production (Release Red Hat Enterprise Linux AS release 4 x86_64 11.2.0.1.0)

  The snapshot command
  -------------------------------------------------------------------------------------------------
  adrci > view home
  Houses of ADR:
  diag/rdbms/orcl/orcl
  adrci > show control
  DIA-48101: error occurred when attempting to read a file [block] [opt/oracle/diag/rdbms/orcl/orcl/metadata/ADR_CONTROL.ams] [0]
  DIA-27072: Message not found 27072. product = RDBMS. installation = DIA
  Linux error: 22: invalid argument
  Additional information: 4
  Additional information: 1
  Additional information:-1

  adrci > show problem

  Home of ADR = / opt/oracle/diag/rdbms/orcl/orcl:
  *************************************************************************
  0 rows read

  adrci > show report hm_run hm_run_1
  DIA-48101: error occurred when attempting to read a file [block] [opt/oracle/diag/rdbms/orcl/orcl/metadata/HM_RUN.ams] [0]
  DIA-27072: Message not found 27072. product = RDBMS. installation = DIA
  Linux error: 22: invalid argument
  Additional information: 4
  Additional information: 1
  Additional information:-1

  Published by: user649619 on January 23, 2010 04:46

  DIA-48101: error occurred when attempting to read a file [%s] [s] [%s]
  Cause: There was an error when you try to play a file with file ADR interface.
  Action: Check the arguments specified in the playback interface.

  >

  HTH
  Aman...

• Why I can't use the procedure in the select statement

  Why I can't use the procedure in the select statement

  And you may not usa a SQL function if it has out parameters

  SQL> create function myfun(p1 in out number) return number is
    2  begin
    3  p1:=1;
    4  return 2;
    5  end;
    6  /
  
  SQL> select myfun(5) from dual;
  select myfun(5) from dual
         *
  ERRORE alla riga 1:
  ORA-06572: Function MYFUN has out arguments
  

  In fact, the problem is that an output parameter is passed 'ref' and not 'val '...

  Max

• How can I use the Variance in FR

  Hello
  
  How can I use the formula of variance in financial reports.
  
  I have in my grid 2rows
  
  
  ColumnA CloumnB Cloumnc
  1 2 4 10 total values
  2 values 1 2 3
  3
  
  Now I need to include a 3rd place called variance in the how I can do this.
  
  Please guide me the formula.
  
  Thank you
  I have w

  Hi, HV,.

  There is a default functions avilable in HFR to calecualate the Variance.

  To do this, you have to select the line formula or the formula column.
  in this column formla, you will be able to set these formulas

  Concerning
  Sri

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• If I buy a T-Mobile unlocked iphone7, can I use the sim card by carrier other than T-mobile on the iphone7? Because I travel abroad from time to time, I wonder if the unlocked Tmobile iphone7 accept any sim card when I am abroad

  If I buy a T-Mobile unlocked iphone7, can I use the sim card by carrier other than T-mobile on the iphone7? Because I travel abroad from time to time, I need to use another sim card when I'm outside of US. So if I order a T-mobile unlocked iphone7, he will accept my sim card from a foreign carrier? In addition, he will accept my 2nd sim card which is Sprint (my sprint sim card is not related to a device)?

  An unlocked iPhone for use with any compatible GSM carrier.

  Sprint is NOT a GSM carrier. They are a CDMA carrier.

• Can I use the iTunes on PCs using Windows 10 app or not? !

  Can I use the iTunes on PCs using Windows 10 app or not? !

  You can run the application iTunes, but not those obtained from the iTunes App Store.

  (144221)

• Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

  Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

  Yes, you can. No, it won't. Apple sells this as compatible with the iPad and iPhone adapter.

  And the phone does a little faster than with the phone adapter.

• Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Yes. You should not lose any data, but always have a backup. In this case, you have your internal drive as a backup.