Cannot able to connect in fdm

Similar Questions

• Cannot able to connect in sys as sysdba

  Hi all
  
  I have an instance name is skydb and once there was a time I used when I created it.i has defined a password for the sys user and password created file.but right now I forgot the password of sys.again creating the password file using below command.

   orapwd file=orapwdskydb password=oracle entries=10

  but cannot not able to connect in sys as sysdba using this password "oracle."
  
  for your information the database now down.we also needs her.
  
  Help, please.
  Thank you very much in advance.
  
  Adam

  output block for

  ps - ef | grep pmon

• Cannot able to connect to Skype with my iPhone

  I can't able to connect Skype in my iPhone5s. I used my username and password in the iPhone 5 s. Is to show that we do not recognize your Skype I would like and the password, but every time I used the same user id and password in my laptop it is smoothly login. Fix the problem as soon as possible

  Can someone help me

• Cannot able to connect to xbox 360 glass smart iOS app.

  Original title: glass smart xbox

  I can't able to connect to xbox 360 glass smart iOS app.

  I activated the security of two steps on hotmail.

  I created the app password for log in glass smart app.

  his failure to connect.

  What is the solution without turning off validation in two steps.

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• Unable to connect to FDM Web after installation.

  Hi all
  
  I am not able to connect on FDM Web App gives me an error
  
  "Impossible to cast type COM interface ' LoadBalanceMgr.clsLoadBalanceClass' object type 'LoadBalanceMgr._clsLoadBalance'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{D37350A9-23E7-4827-98BF-B64C5596D8DD}' failed due to the following error: error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)).
  
  Also when adding Shared Services in the configuration of the authentication provider Hyperion FDM Load Balance I get the error "cannot create ActiveX component."
  
  Any help please
  
  Thank you

  Contol Panel > Add/Remove programs. Choose to uninstall the EPM system and don't check that the components of FDM.

  Restart the server

  Use installtool.cmd to re - install using the option ' install this release > choose components individually.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055

• Not able to connect to Hyperion 11.1.2.3 application of FDM

  Hi all

  I installed the Hyperion 11.1.2.3 on Windows 2008 server (64-bit) version. In one box, installed Essbase, Planning, HFM and FDM.

  Now the question is, I created FDM application then I can't access this application through FDM Web Client.

  It's Wired, it does not show a msg of error in the client web, but able to connect to the site of the customer to work bench.

  Anyone has any ideas please share?

  Thank you

  Mady

  I got to do this, so I'm closing this discussion.

  IE 10 does not support version Hyperion 11.1.2.3. We have IE 9 to access. I'm working on it.

  Since my laptop I can open application FDM its IE 8, IE 9 also it works very well.

  Thank you

  Mady

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• I am not able to connect on my user profile.

  I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

  Hello

  Maybe this will help you:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Renamed user AD not able to connect

  Hi guys

  I have a problem with a user with access to vFoglight through LDAP authentication. The user was renamed to AD. (name changed)

  After the name change, the user is not able to connect.

  In the audit trail, the user is first OK authenticated, and then in the same second there is a connection FAILURE.

  I tried to remove the user from the vFoglight, wait for a while and then try to connect again.

  I checked on the AD domain controller, and the user is authenticated OK

  What is a SQL question?

  Any ideas?

  Hi, Lars

  I hope you get a solution to your problem, but someone else might have the same problem,.

  I will be the top my solution to the problem that just had.

  We are in a process to rename all connections of users I have AD...

  And once a connection of users has been renamed to AD, the user could not log on.

  With no errors in the journal errror FMS or on our advertising servers.

  New users was created in correct Foglight, but when the user tried to log on, but still had a connection error.

  I found a solution that works for us.

  I found that when I turned on debugging on FMS, I got this error message in the error log:

  Cannot insert duplicate in the "dbo.sec_user_alias" object key The duplicate key value is (Michael dry).

  We run the Foglight database on a Microsoft SQL Server, so I looked in the sec_user_alias of the table,

  and even that I had deleted the former user in Foglight, the login name and the username was still in this table:

  userAlias username isdeleted

  str_xxx Michael dry F

  So I just update the table of user with this name:

  UPDATE sec_user_alias

  SET username = 'Michael dry - old'

  WHERE useralias = "str_xxx."

  and then I could connect with the new login user name,

  but all the settings for this user and config disappeared...

  And as I have not talked with Quest/Dell about this, I don't know if this is allowed to do.

  and I don't take any responsibility that it will work in your configuration.

  Best regards.

  Michael

  Update: I found this: Knowledge Article 85132 - 'LDAP user cannot connect after LDAP name changed"- https://support.quest.com/SolutionDetail.aspx?id=SOL85132

  Post edited by: Michael dry

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• vCenter + 3 guest - root - cannot complete the connection due to an incorrect username or password

  Hi guys,.

  It is the latest attempt to address this issue the nice way.

  We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)

  I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.

  Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)

  I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.

  Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...

  It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...

  Any feedback is greatly appreciated!

  Apparently, was my old brain!

  Just enter the password once again with a slight difference and it worked. @

• Cannot complete the connection due to an incorrect username or password

  Hello

  I installed a new free esxi 6.0 server. The installation is successful, but when I try to connect to the VMware vSphere client keeps giving me this error:

  Cannot complete the connection due to an incorrect username or password

  Username and password are correct

  Can someone help me?

  THX

  Just a guess. Are you a password with special characters without selecting the required keyboard layout (i.e. leaving us / English)?

  You are able to connect on the DCUI (console)?

  André

• Not able to connect with the Security Server

  Hello

  IM setting up a demo with view 6 environment, and when I try to connect locally on the servers of connection it works fine, but when I try to connect to the Security server fails with the image below.

  

  The Security server has 2 network cards, now in the DMZ and in production. I guess I should also be able to connect directly to the ip production, but the same error.

  We have disabled the firewall between dmz and prod for troubleshooting, but same problem.

  The image below is the Security Server, the addresses here are the ip 'internet', I guess it's true?

  

  The image below is the connection to server 1, the addresses here are internal, and is the FULL domain name, if it was "internet ip" instead?

  

  If I try on the spot to connect to the ip address of prod on security with internet server explorer, im able to connect, but when I select the office that it will fail "cannot display this page", then shows the 'internet' ip in the address field.

  I guess there is just something simple I've missed... hope you understand my question

  Thanks for the support.

  If you do not already have a look at this description of the display configuration, it covers remote access via security servers as well. Setting up remote access with a view PCoIP 4.6 and newer https://communities.VMware.com/docs/doc-14974

  I guess the fact that you can connect through the servers of connection that the URL you configured in the view administrator for servers in connection is a production local IP address/address?

  External security URL server is also an IP/address of DMZ / external can be solved?