Cannot access a record with an ActionLink

Similar Questions

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• Cannot access files locked with access TrueSuite Manager

  I have files with Access Manager TrueSuite locked. My Windows bug and now I cannot access these files locked.
  When you try to unlock, I get the error and I can not read these documents.

  Thank you.
  Excuse my bad English.

  I found this document:

  Useful information about the file protection with AuthenTec fingerprint software
  http://APS2.toshiba-tro.de/KB0/TSB9C02RC0001R01.htm

  Eventually, you will not be able to unprotect the files again
  But try this backup data to the external HARD drive or somewhere else.
  Then reinstall this software and import data from external source.
  Then try to unlock this new

• Cannot access the internet with WRT54G hung Hughsnet Satellite HN9000 modem

  I tried to configure my router to work with my Hughesnet HN9000 satellite modem WRT54G and my desktop tray.  I have a Gateway PC and am using Windows XP. I had worked in the past but came out the router for a few months when my portable wireless is dead. Now, I can not the desktop computer to access the internet with the router in place so I can set it up. The cables are all plugged in right. Cable from the modem to the internet port on the router and the Router 1 port Ethernet cable or 4 for desktop.  I cycled all over and outside. I can access the internet fine if I have the modem connected directly to my computer so I know that I have an internet connection. Hughsnet says it's the router. Because it is out of warranty, I can't get any help from Lynksis. I ran the set up disk Lynksis. I suspect that error messages I receive it has something to do with the IP address. But if I can't access the internet how can I do anything with the IP address of the router?  I'm not very experienced when it comes to the routers and network settings. Anyone has any comments that could help. I should be able to figure it all out if I can get just the router connected to the internet. . Thank you...

  Thanks, I found the problem. The Ehernet cable plug was defective. It would work on the Satellite modem, but not the router because of the localities of diffétent and different stress on the card. Changed the cable and everything works fine now.  Thank you.

• Cannot access some websites with any browser

  I can't access some websites with any browser

  What happened with a few sites, but who is really upsetting me is https://simply. freetax.com

  I tried IE, Mozilla and Opera

  In each one I click on the link then it takes forever for what it is loading and when it does it is one of the many messages of error according to the site.

  It is not my ISP or router is blocking the site because I can access it from any of the other 4 computers in this House. It seems that the problem is limited to my desktop unit. I tried to disable my firewall and antivirus. I erased from history. I have no idea where to go next.

  Help, please

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may occur if there is a change in the configuration and network settings.

  See methods below to solve the problem.

  Method 1

  Try running the Fix - It from the link below. He will try to correct the most common problems with the network.

  https://support.Microsoft.com/en-us/KB/299357?WA=wsignin1.0

  If the problem persists, check the method below.

  Method 2

  Try resetting your Internet Explorer and see the link below. He starts the internet explore to the default state.

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Also re - activate the Add-ons.

  Check if it helps.

  Method 3

  Web connection issues are frequently a corrupt DNS cache. Flushing the cache is an easy solution to many of these problems.

  Here's how to fix this corrupt DNS cache.

  1 click Start.

  2. type cmd in the search bar.

  3. right click on cmd and select run as administrator.

  4. in the command window, type the following, and then press ENTER:

  ipconfig/flushdns

  5. you will see the following confirmation:

  Windows IP Configuration properly empty the Cache of DNS resolution

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Air 1131AG - cannot access the unit with http

  I just bought two 1131AG and am not able to access the unit with Internet Explorer.

  The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either.

  The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong.

  I also have access to the consoles.

  Thanks in advance.

  Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention).

  Convert a standalone Lightweight Access Point

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version".

  Good luck.

  Please rate when useful and/or there is. Thank you.

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Access to records with family safety filter?

  Is this possible with family safety parental controls / filter to block children to delete files, such as photos, videos, music, etc.?

  Hi Nathans77,

  We are happy to help you with your concern. I understand you want to prevent your children from delete files on your computer.

  Family safety doesn't have the function to set restrictions on the files, or prevent access to the files on your computer.

  What you can do is set the security properties of the files so it cannot be changed. You can also create another user account where your child can not access so that the files cannot be deleted. If you need help in the protection of your files are deleted, you can post it on the forum of Windows.

  Please let us know if you have any other questions.

  Thank you!

• Cannot access photos taken with camera assistant

  I used the camera wizard to extract the photos from my camera digital polaroid i835.  In the past I could simply access it through my computer by selective USB key on which the device has been connected, select the photos and copy and then sticking them to my pictures in My Documents.  For some reason any today there was a problem so I used the camera Assistant.  He did copy the folder marked polaroid in my images, but when I try to access it, the folder opens and the pictures begin to appear and then I get the error message that the application must close and then "send the error message' or 'do not send' I even tried to access it through safe mode by using the command prompt , but even if the files are listed using dir / p, when I try copy 154.le jpg (or polaroid 154.le jpg because he seems to be appointed) I get the message "file not found".  If I try to attach a photo of this file to an e-mail message, the email app everything stops.  If I try to open a photo from this folder in the paint, then paint stops. I spent four and a half hours trying to solve this problem. Unfortunately the wizard removed the files from my camera before I realized what was going on and that I could stop it to do.  I think that the pictures are on my computer in the folder.  I just can't access. In addition, the folder on my flash drive with old pictures recorded by copy and paste of this camera now allows the same error and I can't access those not more, although I already have.  What could be wrong?

  Thank you, Sharon Bach

  Personally, I think I would delete the problem of
  the disk hard drive... looks like they are corrupt for me.

  Maybe you can recover files from flash drive
  with the following free software:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery
  http://www.Piriform.com/Recuva

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  If you try it... Please let us know the result.

  Good luck...

• E1550 - cannot access drive USB with Ubuntu

  I forget probably something real obvious but after screwing around for two hours, I tell myself that I need help.

  I am running Ubuntu 14.04. I configured the router E1550 with an external drive that I formatted with the router utility. At this point, I don't have an internet connection that is connected to the router - I'm not sure I want at the moment. I want to do is to access, wireless, a disc that allows multiple users to backup their important files.

  I tried to use read/write disk anonymous access as well actions also create. The features seem to be set up ok but at this point I have no idea how to do to access the drive.

  I tried using the files of Ubuntu, then by selecting "browse network" then selecting "windows network. Alas, 'windows network' is an empty file without current disc.

  I tried to access the wireless router and also hard not wired - no joy.

  Maybe I'm not access the drive properly in Ubuntu? I need to mount the remote drive, rather than access it through windows network?

  Thank you for the pointers given!

  It seems that thatt I some eggs on my face here... I've done a re-boot of the computer and the shared disk is readily available.

  I don't know why this would be needed - maybe something went haywire, or has been corrupted, but now everything works... go figure...

  Thanks pinkyzeny... your suggestion did not help directly but indirectly, it leads to reset and that solved the problem!

• Cannot access my money with 20 years of information file

  Money request a password. After putting the correct password, a box with one? comes up says:

  "Money has detected that you did not close the file 'My money xyz' before leaving. Money now needs to verify the information contained in your file. If the file is large, this may take a few minutes. You want to do now? »

  When you click Yes, a work area appears then disappears and is replaced by

  "The e-mail address is incorrect. Please try again. »

  And then I'm back to start again. Please help me regain access to my account.

  I don't know what version of Money, you use, but try this.

  (1) starting the program, but don't kick punch in your Live ID & password
  2) click on the menu, the option to file Money/repair of files
  (3) navigate and select your file.

  The utility will require that you enter a new name/location for the file and it will create a new one with your data.  Take care of is not to overwrite your existing! I've used this several times in the past to solve a similar problem (I used the money for 15 years myself), but in either case, that it didn't work and I had to restore a backup of the file.  There is an option in the software to create backup copies every time the file is closed - you can turn on that (if it isn't already) to help prevent data loss.  Good luck!

• Cannot access the database with IP SCAN

  People,

  We have a RAC 11 GR 2 to 4 knots on EXADATA machine system. While we strive to connect with easy connect method as

  sqlplus system $ / password@node1-vip:1521 / ORCL

  It will correctly connect to the database. But while we use IP SCAN:

  sqlplus system $ / password@node-scan:1521 / ORCL

  It returns, ORA-12514: TNS does not currently of service requested in connect descriptor.

  However, the local settings and remote listener with correct values and nslookup return correct results. Please, advice on that.

  Kind regards

  Ali

  Local settings and remote listener were correct, that the listener SCAN was not record instances were. As a result, we removed and again fix the SCAN with grid services and then save instances with SCAN. So, it worked. Thanks to you two!

• Cannot access the apps with the license, I just bought

  Hello

  I just bought a license for teachers for the creative cloud, but I can't access apps.

  What I am doing wrong?

  Thank you!

  

  allow 1 day working pst for your order to be processed. It's Sunday am pst.

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html