E1550 - cannot access drive USB with Ubuntu

Similar Questions

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

• Cannot access a USB flash drive (' f: removable drive ")

  I can't access the USB drive (removable F :) drive.  When I open 'My computer' drive F: is not even.  How to fix this?  (I have Vista. Yes, the disc is fine.)

  Hello

  You meet other USB problems on this system. The drive works on the other
  computers?

  Check with the help of the player.

  This can help regardless of the brand:

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your
  computer, as well as all USB devices that you previously used. Run Options and check
  the 1st three choices to see if there are here. Try to remove all instances and restart
  then connect the player.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• E1550 cannot access hard drive NTFS.

  I had already posted about problems with the E1550 is not able to recognize NTFS formatted hard drives.  After several attempts and reformats I was finally able to run and has been able to back up my hard drive NTFS system files.

  Now, little more than a week later I set up to run my backup to run again and once more the E1550 not access the hard drive.  The same as he had previously recognized and allowed me to save in.

  Twhat he E1550 sees that there is a hard disk there, but all he says is «detection...» ', this does not change.

  I need this to be fixed and remains fixed.  If he's going to do every time I turn on the drive to make weekly backups, then I need to get another router wireless.

  Thank you

  I had to call tech support and the Department of advanced technology does a remote to connect to my network.  After a lot of control and looking around, they discovered that two of the hidden system files that the E1550 creates hard disk were corrupted.  Once these two files have been deleted the E1550 completed the connection and makes accessible drive.

• Cannot access the usb Gizmo.

  Original title: bo

  It cannot access usb Gizmo! Crucial storage device. Window 7 it shows in Device Manager, but do not have access to the device. I used this drive for 4 years, I need the data on it.

  Hello Bobby.

  Thanks for posting your query in Microsoft Community.

  • Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

  I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  Disable USB selective suspend framework. This method prevents your power off USB device.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Cannot access files locked with access TrueSuite Manager

  I have files with Access Manager TrueSuite locked. My Windows bug and now I cannot access these files locked.
  When you try to unlock, I get the error and I can not read these documents.

  Thank you.
  Excuse my bad English.

  I found this document:

  Useful information about the file protection with AuthenTec fingerprint software
  http://APS2.toshiba-tro.de/KB0/TSB9C02RC0001R01.htm

  Eventually, you will not be able to unprotect the files again
  But try this backup data to the external HARD drive or somewhere else.
  Then reinstall this software and import data from external source.
  Then try to unlock this new

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• Cannot access the internet with WRT54G hung Hughsnet Satellite HN9000 modem

  I tried to configure my router to work with my Hughesnet HN9000 satellite modem WRT54G and my desktop tray.  I have a Gateway PC and am using Windows XP. I had worked in the past but came out the router for a few months when my portable wireless is dead. Now, I can not the desktop computer to access the internet with the router in place so I can set it up. The cables are all plugged in right. Cable from the modem to the internet port on the router and the Router 1 port Ethernet cable or 4 for desktop.  I cycled all over and outside. I can access the internet fine if I have the modem connected directly to my computer so I know that I have an internet connection. Hughsnet says it's the router. Because it is out of warranty, I can't get any help from Lynksis. I ran the set up disk Lynksis. I suspect that error messages I receive it has something to do with the IP address. But if I can't access the internet how can I do anything with the IP address of the router?  I'm not very experienced when it comes to the routers and network settings. Anyone has any comments that could help. I should be able to figure it all out if I can get just the router connected to the internet. . Thank you...

  Thanks, I found the problem. The Ehernet cable plug was defective. It would work on the Satellite modem, but not the router because of the localities of diffétent and different stress on the card. Changed the cable and everything works fine now.  Thank you.

• Cannot access some websites with any browser

  I can't access some websites with any browser

  What happened with a few sites, but who is really upsetting me is https://simply. freetax.com

  I tried IE, Mozilla and Opera

  In each one I click on the link then it takes forever for what it is loading and when it does it is one of the many messages of error according to the site.

  It is not my ISP or router is blocking the site because I can access it from any of the other 4 computers in this House. It seems that the problem is limited to my desktop unit. I tried to disable my firewall and antivirus. I erased from history. I have no idea where to go next.

  Help, please

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may occur if there is a change in the configuration and network settings.

  See methods below to solve the problem.

  Method 1

  Try running the Fix - It from the link below. He will try to correct the most common problems with the network.

  https://support.Microsoft.com/en-us/KB/299357?WA=wsignin1.0

  If the problem persists, check the method below.

  Method 2

  Try resetting your Internet Explorer and see the link below. He starts the internet explore to the default state.

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Also re - activate the Add-ons.

  Check if it helps.

  Method 3

  Web connection issues are frequently a corrupt DNS cache. Flushing the cache is an easy solution to many of these problems.

  Here's how to fix this corrupt DNS cache.

  1 click Start.

  2. type cmd in the search bar.

  3. right click on cmd and select run as administrator.

  4. in the command window, type the following, and then press ENTER:

  ipconfig/flushdns

  5. you will see the following confirmation:

  Windows IP Configuration properly empty the Cache of DNS resolution

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Air 1131AG - cannot access the unit with http

  I just bought two 1131AG and am not able to access the unit with Internet Explorer.

  The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either.

  The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong.

  I also have access to the consoles.

  Thanks in advance.

  Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention).

  Convert a standalone Lightweight Access Point

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version".

  Good luck.

  Please rate when useful and/or there is. Thank you.

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Satellite L20-100 cannot access a USB Flash drive

  I recently bought Toshiba Satellite L20-100
  I installed a USB in Kingston datatraveler flash drive and windows recognized it without problem.
  but when I open my computer there is no icon for the reader (it works on another computer well).
  the drive is recognized in Device Manager, but it is not given a drive letter.
  When I open disk management and try to give it a drive letter it still does not show on my computer even after a reboot.

  Although I can access the disk management flash drive and can open, copy & paste the files & to her.
  same problem happened with a card reader.
  other USB devices like cable modem & mouse work well

  What is the solution

  Hello

  Is it possible that the USB is not formatted? Try changing the file system on the USB key.
  You can also try to change the drive letter because the letter assigned automatically sometimes gives some conflicts with other readers.

  Second possibility:
  You can try to clean all the USB stored device settings and let Windows refresh their.

  Create a file with Notepad containing the following lines and save it as a BOOKMARK. REG
  -cut after this line-
  REGEDIT4

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Environment]

  "DEVMGR_SHOW_NONPRESENT_DEVICES" = "1".
  -cut before this line-

  Double click on FIX. REG and say yes to the merge into registry question.

  Unplug ALL USB device.
  Open the Device Manager.
  View, show hidden devices.
  Uninstall all devices under USB controllers.
  Uninstall all devices in hard drives that you know are not present.
  Uninstall all devices in storage Volumes. Say no to all reboot prompts until you are finished.
  In addition, if a storage Volume doesn't uninstall, ignore her and move on to the next.
  If you have a yellow? with unknown devices, uninstall all of the entries there as well.

• I messed up my permissions and cannot access my usb drive. How can I go back to the previous settings?

  I found that my permissions said anyone can access the drive and I tried to change that. Now, I can't access the drive. I thought I had administrative priveliges but only found that the administrator has disabled after the fact... me dumb. Help please. Thank you very much. SrLoren

  You can use any admin account to take possession of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Cannot access photos taken with camera assistant

  I used the camera wizard to extract the photos from my camera digital polaroid i835.  In the past I could simply access it through my computer by selective USB key on which the device has been connected, select the photos and copy and then sticking them to my pictures in My Documents.  For some reason any today there was a problem so I used the camera Assistant.  He did copy the folder marked polaroid in my images, but when I try to access it, the folder opens and the pictures begin to appear and then I get the error message that the application must close and then "send the error message' or 'do not send' I even tried to access it through safe mode by using the command prompt , but even if the files are listed using dir / p, when I try copy 154.le jpg (or polaroid 154.le jpg because he seems to be appointed) I get the message "file not found".  If I try to attach a photo of this file to an e-mail message, the email app everything stops.  If I try to open a photo from this folder in the paint, then paint stops. I spent four and a half hours trying to solve this problem. Unfortunately the wizard removed the files from my camera before I realized what was going on and that I could stop it to do.  I think that the pictures are on my computer in the folder.  I just can't access. In addition, the folder on my flash drive with old pictures recorded by copy and paste of this camera now allows the same error and I can't access those not more, although I already have.  What could be wrong?

  Thank you, Sharon Bach

  Personally, I think I would delete the problem of
  the disk hard drive... looks like they are corrupt for me.

  Maybe you can recover files from flash drive
  with the following free software:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery
  http://www.Piriform.com/Recuva

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  If you try it... Please let us know the result.

  Good luck...

• Cannot access the USB storage

  I had an E3200 for over a year and all is well. I have a 128G USB plugged into the usb port and had no problem sharing the content with any user connected to the router. In the last 2 days I started to have access to the USB problem. When my WIN8.1 came, I saw notification saying: "unable to cnnect to all network drives" and I can't go to the USB. The other function of the router is fine (each user can access the internet without problem). I tried to check using the administration interface. But 192.168.1.1 has not returned the admin login (via IE or Chrome).

  I put off and then power on the router, I can only get to the admin and saw no problem with the USB Stoarage and I was also able to get the USB content on my file Explorer.  It remained OK when I was using my laptop (maybe 1 or 2 hours). But the next time I turn on my laptop, I had the problem once again (impossible to get to the USB drive and 192.168.1,1 are not returns login prompt).  Power off and power on the E3200 will do again. Any suggestions on how I can know what is the problem?

  To help us isolate the situation, try to access your files using other laptops. If all devices are affected, it would be better if check you if the firmware is up to date. If this is the case, you can try to re-flashing the firmware.

  To download the updated instructions and the latest firmware, go to this link, http://support.linksys.com/en-apac/support/routers/E3200.

  It is recommended to do a factory reset after properly updating the firmware. Reconfigure the router and observe its performance.