Cannot access bios or UEFI in laptop upgraded

Similar Questions

• Cannot access BIOS laptop Aspire 7250

  Hi all, I have a laptop Acer Aspire 7250-0209 who cannot access the BIOS menu. When I turn on the laptop it just see the Acer boot screen and then immediately switch to a black screen with white text saying "no boot device - insert boot disk and press any key any." At first I thought that the HD was defective, so I replaced with a new HD but still its giving the same problem. Not only can I not load/start windows but there is no option to access the BIOS (even I tried pressing F2, F10, F12, delete). Please can someone enlighten me on what is possible for me to be able to access the BIOS and reinstall windows. Thank you

  short 2 pins on the right side

• Cannot access BIOS for Sony Vaio VPCEH25EN

  Hello to all members of the community...

  Well, I have here the computer sony vaio laptop VPCEH25EN I tried evrerthing watched several videos...

  but I can't get into the BIOS settings...

  tried every combination of keys f1 to f12 alt del and help button but I cannot get into the BIOS menu...

  I think that the bios is locked actually, I want to install windows 32 bit currently there windows 7 64 bit...

  I also installed winbcd and tried to boot from usb it but it says no operating system found that the USB is DΘmarrer on my other laptop and desktop...

  the assist button does not have the option in the BIOS it has just 3 options...

  Start the recovery Wirard

  Tools

  Output...

  even more, I installed windows 10 64-bit on it and reboot into recovery of advance and there is no option to disable UEFI...

  Please tell me how to access bios on this laptop...

  I finally fixed it... Sony is a lame!

• Cannot access BIOS on Satellite C875

  Hello

  I have a Sattelite C875 - 13L PSCBCE.
  I am running windows 8, and when I press the F2 key to start the computer, the computer starts Windows. I cannot access the Bios is only from windows 8 (settings > general...)
  I have another problem too, I can't turn off the option "open Panel - Power one. This option is enabled or not, the PC boots with the Panel open.

  Thank you very much for your answers.

  The complete stop next http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after to redo this laptop start and try to enter the BIOS settings.

• Cannot access BIOS after closing down and also can not use change PC settings either.

  Hello

  I am wanting to access BIOS so I can restart the computer with windows 7, since I had nothing else problems with windows 8.1. It messed up my registry and now I can't use one of the windows in all applications, just the office part. (Computer worked fine with windows 8 before that I "upgraded", if you can call it.) So either no access to change PC settings and the BIOS keys do not work when you press during loading. Help, please

  Hello

  Try the following.

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• Cannot access bios after installing the video card

  I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

  Hello:

  You may need to change some BIOS settings - even if you add an external video card...

  http://support.HP.com/us-en/document/c03653200

• Cannot access on the desktop, the laptop readers.

  I have two computers running Win 7 Ultimate. 1 desktop and 1 laptop. I'm running through a Netgear wireless router. Office is hard wired to the router via an ethernet connection. The laptop has a wireless connection. I also have a cable for color laser printer to the router via an ethernet connection.

  The laptop can see the desktop and can access the printer and some of the hard disks on the desktop. The laptop can detect and access G: and H: drives on the desktop but not C: D: E: and Z: drives. G: and H: drives are located on an external USB disk door. The other drives are connected internally to the desktop. Trying to access drives unaccessable to the desktop, I get the following error message.

  "Windows cannot access \\DESKTOP\Desktop C:.  You are not allowed to access \\DESKTOP\Desktop c. contact your network administrator to request access. »

  The office displays the icon of the laptop in the network, but I get the same error message when I try to access the laptop, but the laptop is overridden to desktop in the above error message. The error code is: 0 x 80070035.

  All readers have enabled file sharing and permissions set for everyone. In fact each player is set up exactly the same thing, and both computers are set up exactly the same except for the name of the computer (eg. Mobile - Office).

  Does anyone have any suggestions?

  Thanks for any help.

  Ed Wood

  Hello Edawood,

  I suggest check to ensure that all services of collective housing began and then retry the connection:

  Open the services menu by clicking Start and then type "services.msc" then on enter.

  Locate the following services in the list:

  ·         DNS client

  ·         Function Discovery Provider Host

  ·         Function Discovery Resource Publication

  ·         Peer networking grouping

  ·         HomeGroup provider

  ·         HomeGroup listener

  ·         SSDP Discovery

  ·         UPnP device host

  Sure they were launched and retry the connection.

  To start the service, double click on it and press the 'start' button in the dialog box that appears.

• Cannot access BIOS after own Win 7 installed on the new HD

  The machine is HP Elite E9240F. Here's what I did.

  1 replace the plant HD with faster player - went well

  2. clean install Win 7 on new drive - activate - went well

  3 reinstall the disc supplied with the box in the first place & format - went well.

  Now everything starts fine, and loads of Windows. NO problem BUT I cannot access the BIOS more. Not that I need at this time, but I would like to know that where I did it, I could.

  Repeated F1 or F11 at startup pressure will produce the black screen for the Windows Boot Manager.

  I removed the CMOS battery and retried - same results. I can access the blue screen when I select the boot sequence by pressing ESC but never can I go back in the system BIOS.

  Thoughts?

  All these systems are a bit different but F10 to enter the bios to me.  If it is your PC then F10 to enter the bios: http://support.hp.com/us-en/document/c01925486

• Cannot access internet on my Toshiba laptop

  Hi can someone help.

  I can't access the internet on my laptop.
  This happened recently that I was working online when my battery was flat. Severance pay I was not able to get access.

  I can still receive updates.
  I even tried using another browser, nothing helps.

  Please can someone give me a clue?

  Kevan

  Using LAN or Wifi?

  Is what model laptop?

  What is the error you get when you try to access the Internet?

  What Antivirus do you use?

  Have you tried to disable the firewall?

  Your ISP uses a Proxy Server for internet connection?

  Have you reinstalled/updated the network drivers?

• 6 beeps startup then normal but cannot access bios

  My computer is a desktop HP ENVY h8xt, Intel® Core™ i7-3770, 3.4 Ghz (Costco) which is the same as the HP 1420 t CTO with 64-bit Windows 8 H8

  I added a FX - 785 A-ZDF4 Double D XFX Radeon HD 7850 1 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX... When I start, I hear 6 beeps, and then the computer starts fine and the video card.  However, when I try to access the bios by pressing f10 at startup, the computer restarts.  I'm unable to access the bios to try one of the solutions I've seen on the forums.  How can I eliminate the beeps and access the bios?

  I've also updated the PSU to an OCZ GameXStream OCZ700GXSSLI 700W ATX12V SLI certified CrossFire Ready Active PFC power supply which should have a lot of power (700w).

  I managed to solve this problem, and obviously it's a thing of Windows 8.  Obviously when you add a market after video card in a "certified Windows 8" PC, you will need to disable "secure starting", according to this link.

  In addition, in order to access the bios of Windows 8 you must get the bios from Windows 8 according to this link.

  Among the many changes coming to Windows 8 new computers designed for this is a change in the way we access BIOS of our computers. >>

  This allowed me to get into the bios and disable start-up secure and everything's fine.

• U410: Cannot access BIOS

  Hello

  I run into a problem with the Bios. A few days ago, I changed some settings in the Bios and now I can't access it. There is no support on don't enter to interrupt the boot, F1, or other buttons do not have Bios at startup. What can I do to enter the parameters of the Bios again?

  After the BIOS update I can access BIOS again

• Cannot access BIOS when OS disk encrypted w / Bitlocker, starting on the USB key is not unlock disc

  Hello

  I enabled Bitlocker on my Acer Aspire 5315. The system partition is encrypted and the data partition. My motherboard doesn't have a TPM chip, so I opted for the unlock with a USB key.

  When I start the PC or wake them from their hibernation, the splashboot (with the logo of Acer) BIOS screen does not display the information below on how to access the BIOS (press F2) or the boot menu (F12). And therefore I can't access those as I used to.

  BitLocker does not account for the USB key, then asks for the password to unlock the HARD drive. Then Windows starts very well.

  However, restart (by a Windows or after you have entered the wrong password Bitlocker too many times), the BIOS splash screen is normal (with how access BIOS and boot menu), I can access BIOS by pressing F2 AND succesfully Bitlocker unlocks the HARD drive with the USB flash drive without having to ask for the password.

  So, my question is how Bitlocker unlock the HARD disk automatically via the USB when the PC starts?

  Thank you for reading.

  Note: I posted this question on http://social.technet.microsoft.com/Forums/en-US/w8itprosecurity/threads they suggested that I ask the Acer support.

  Thank you also get answers in the TechNet forums.  I'm sorry that you were unable to get a more complete answer it.

  We suggest that you uninstall BitLocker and decrypt the drive to determine if this restores your ability to access the BIOS.

• Cannot access BIOS screens

  [Pavilion Dv6915nr, Vista 32] I can't no longer to the BIOS during the startup screens. It asks for a password, that he never had a. At one point, he shows a screen in French. I tried a BIOS update, but he refused to run.  Virus?

  Turns out it was just a BIOS battery dying.  Replaced and accessing BIOS very well.  No motherboard problem.

• Satellite C660-125 - cannot access BIOS after upgrade to Windows 10

  Hello, I just upgraded to 10 Windows Home of Windows 7 and now HWSETUP. EXE is not running and when restart the laptop I can't enter the BIOS with F2 or F12. Can someone companion please? Kind regards

  You must install the driver from Toshiba for Windows 10 system.
  However the C660 does not seem to be in the supported list, you may need to go into BIOS instead.

  Hold SHIFT key during shutdown to shut down Windows hybrid suspension mode. Keep now SHIFT until the power goes out.
  The BIOS F2 message appears only if the laptop is a cold start.

• Cannot access BIOS laptop

  Hi I just got a new Lenovo G50, use F1 and F2 to start my computer does not.

  Could someone please help me off course I got a 10 to win.

  Hi, you turn off your laptop. The left side close OnekeyRecovery button and press F1 or F12

  Link to image