Cannot access my DVD-CD in my computer

Similar Questions

• A windows 7 computer cannot access a file share on another computer windows 7 in a home network, but others can.

  Hello

  "You don't have permission to access \\computer x\c. Please contact your network administrator to request access to ' I want to be able access all computers on my network, whether they are Windows 7 64-bit or Windows XP Pro machines.

  All computeers can access Internet and my printer.

  I'm unable to access files on one of my computers on my home network to a PC running Windows 7. The same PC can access most of the other files on the other PC. I have a mix of XP Pro and Windows 7 and they are defined as a working group not a homegroup. To complicate the isue is a laptop computer that cannot access this computer either. But the facts are that two Windows 7 PCs that appear to have identical settings cannot access both another windows 7 PC.  I guess that the unreachable PC appropriate sharing as other computers on the network can access.

  How can I change the target of the PC share permissions so I can access it from any computer on the network? Or maybe the question is from the other computers that access computer is blocking access to the setting on the PC that can't?

  All computers can view the readers there is a problem if a drive is empty, why report it: "you are not allowed..." »

  Hello

  Refer to the suggestions for the following links and check:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope the above information helps!

• Cannot access the recovery command prompt Vista computer network

  I have Vista machine over the network to a Windows 7 computer and used wbadmin to perform a backup of the Vista machine on a shared folder on the Windows 7 machine. Now I want to access it from the Vista recovery command prompt (after the start of the DVD). I can't access the folder.

  I ran first startnet. I assured that the folder has received the maximum share permissions. However wbadmin get reports versions "could not read the backup destination. I tried dir on the network share location and it says "access denied." I tried net use on the network share, location, entered the correct user name and password, and he noted "the provided user context is not valid.

  The share is accessible when Vista is started normally.

  Hello

  Check if you put in the correct username format, example:

  Enter the user name for : \username
  Enter the password for :

  If they continue to have problems, I suggest you repost the question TechNet.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find CD/DVD drive in my computer on Device Manager. CD - DVD does not work

  I recently discovered that my CD/DVD drive does not work. It worked fine before. Tried to burn a CD in iTunes, but the error message says that the software or the CD device could not be found.

  My CD/DVD drive does not appear in the computer or Device Manager. I have read a few forums and tried to delete upper and lower filters, but that no longer works. Help, please.

  I am running Windows Vista - it came installed on my computer when it was purchased.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot access a shared folder on the computer Windows 7 on a Windows Vista-based computer

  I'm having a problem.

  I have a small network in my house consists of three computers.  One is running XP, it has Vista Home Premium, and it has Windows 7 Home Premium.  I usually use wireless networks, but I have the same problem if I use wired connections through my router.

  All three computers can see each other when I display the network on each.  I can ping each computer from other computers.  The problem is that when I try to access a shared folder on the Windows 7 computer from the Vista computer, I get an error window popping up that says:

  \\computer-name is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The network location cannot be reached.  For more information about network troubleshooting, see Windows Help.

  I can get in the same shared folder on the XP computer.  I also have to shared folders on the XP computer Vista computer.

  I can also get to the shared folders on the XP and Vista computers on the Windows 7 computer.

  The only problem is learning to the shared folder on the Windows 7 computer Vista computer.

  The folder on the Windows 7 computer is configured to be shared by everyone.  Password sharing is disabled on all three computers.

  Any help would be appreciated.  If there is more information, I can give you, let me know.

  Thanks in advance,

  Bill

  Hi all

  Try this one:

  DISABLE password protected sharing"in Windows 7 network and sharing Center, advanced settings.

• Cannot access the DVD player

  Currently, I am unable to use my DVD drive. This is the first time I had to use it as buy this HP laptop (HP Pavilion Notebook PC e051tx-15) the drive responds to press the button eject, but when a disc is inserted, that nothing comes under 'computer '. In Device Manager, there is an entry failed for HP DVDRAM GU70N (see below)

  

  I checked the driver download page but could not find something to fix this. Any help would be appreciated.

  -Aaron (x2jiggy)

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Cannot access internet after turning off the computer during the update

  original title: computer problems

  After windows has been a configuration that we couldn't not get out of the loop from 0% for my daughter close, now it used to connect to the internet, and when we try to watch whatever it is to diagnose why it freezes just straight up

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot use my dvd drive. c:\Program Files (x 86) \sMedio\WinDVD11\SQPlus.dll is missing on your computer

  Cannot use my dvd player... computer box that says c:\Program Files (x 86) \sMedio\WinDVD11\SQPlus.dll is missing on your computer is displayed. Try reinstalling the program to fix this problem. I don't know how to do this. Help, please. Thank you...

  Original title: (x86)\smedio\WinDVD11\SQPlus.dll

  Hi David,

  Answer the following questions to learn more about the subject, you are faced with.

  1. What player are you running the DVD?
  2. What is the brand and model, the computer?
  3. Windows Media Center is installed on your computer?

  If you use an application of part 3^rd to run the DVD. Uninstall, reinstall the 3^rd party DVD running the application, this should solve the problem. See the following procedure to uninstall the application.

  a. press Windows + X on your keyboard.

  b. click Control Panel.

  c. on the Control Panel, select display large icons and open programs and features.

  d. right-click on the program and click Uninstall.

  Hope this helps you. Please let us know if you need assistance.

• I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  DVD decoder not installed?

  I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
  A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?

  I tried to play one of the same DVDs I played before... same message.  Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.

  Thanks if anyone can help.

  Yes, and if you install the utility on your system, you'll see all decoders.

  The utility will also tell you if a decoder is compatible or not.

  Using Media Player version 10 or 11?

  the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert).   It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.

  because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)

  So great to have the entry of a person who knows what he's doing.  Thanks again. I will try the Windows Media Player later and see if I have his use of return.

  Have a great day!

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• My computer, I cannot access my account even though I have the password.

  I have problems with my user account on my laptop Inspiron 1525 Windows Vista. Although I tried to type my password to access my account, it keeps giving me a message. The message reads: "the user profile Service service has no logon. User profile cannot be loaded. "I appreciate all the comments and solutions to this problem of mine. Please and thank you s!

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot access REGISTRY EDITOR, can not access the folder/search options, impossible to write on DVDs, etc..

  I downloaded some sort of virus... System locked during the update to SP2...
  Windows would NOT start...
  Removed the hard drive and inserted in the external box.  External attached to the computer with a software 'quality '.  DELETED malware...
  Re - slot atmosphere inert hard drive to the system, windows starts with the recovery disk, completed the installation of SP2, windows starts!
  Cannot access registry editor options, folder and search "grayed out", write data on DVD, etc., etc., etc.
  Pulling hair, don't want to leave, ALL ADVICE?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Ignore this message until all characters for your e-mail address are typed on the input field.

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Cannot access files on my old computer with easy access of Windows

  I can't access my files on my old computer with easy access of Windows.  Whenever I go through the process, he crosses to examine what can be transferred and then displays a message "windows easy transfer cannot log on to your domain account. What are my next steps?

  Hello

  The question you posted would be better suited in Windows IT pro community or you can contact your network administrator.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads