Cannot access my network after I have reset my router

Similar Questions

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Cannot access planning applications after you have added the calculation Manager

  Hi guys,.
  
  I have recently added/installed the Manager calculation on an environment running (EPMA, HPL, BSE) (11.1.2.1/win 2008r2 64 bit), which had prior to installation of the Calc Manager. EPMA and planning applications in classic and running.
  
  After that, I deployed the calc manager and configured the Web server on the server of the Foundation/epma only, I have 3 servers (Foundation, Manager of epma and calc), Essbase and planning.
  
  I have restrated the services and I can open the calculation Manager.
  
  When I try to open the existing applications of EPMA I get:
  
  [launch the journal]
  [< BEA-101020 > < [path of the module: HyperionPlanning ServletContext@6352948[app:PLANNING: / HyperionPlanning spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception
  java.lang.ClassCastException: java.lang.NoClassDefFoundError
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at HspValidationFilter.doFilter (unknown Source)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  [End log]
  
  I tried to transfer the applications of EPMA exisitng but it has been abandoned with (HTTP/1.1 500 Internal Server Error)
  
  I checked the ohs_component newspaper and saying some file is missing:
  
  [launch the journal]
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/bpmui/resources/bpm_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/resources/wksp_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/cds_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/tools_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/reporting_analysis/resources/fr/fr_web_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/planning/resources/hp_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/awb/resources/awb/awb_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/aif/resources/aif-global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/calcmgr/resources/calcmgr_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/changeManagement_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/webanalysis/resources/resources_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  ....
  File does not exist: D:/Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/htdocs/favicon.ico
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet, Resp Code: [500]
  
  [End log]
  
  
  Appreciate any help! and thanks in advance,
  Omar
  
  EDIT:
  I found that all the. JS files that are missing are actually there only without "-U.S.»
  
  Published by: Omar on January 23, 2012 15:17

  Have you tried to redeploy planning again?

  In theory, you should be able to install/configure additional products at a later stage if because they are produced of foundation it may have caused problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• Hello.. I would like to know after you have reset my apple ID, I could not singin' in my phone

  Hello.. I would like to know after you have reset my apple ID, I could not singin' in my phone

  Make sure you follow the instructions of this Apple Support article:

  What to do when you have changed your Apple ID email address or password - Apple support

• Windows cannot access file you will not have permission to access the item path or specified device.

  Windows cannot access file you will not have permission to access the item path or specified device.

  I have windows7 OS, I try to open any application above the display of error messages.

  Please help me...

  Thank you!!!

  original title: Windows cannot access

  another user account works fine.

  Then, your profile is corrupt.  Create a new user, copy documents and other profile corrupted on the new profile.

  Do not copy * all *-only things you have created.  (Except the shortcuts).

  Is the user profile damaged an administrator or standard user?

• EA6350 not accept the password "admin" little matter I have reset the router device.

  Hello

  I just brought a new EA6350 router and it does not accept the 'admin' to connect to the router. I have reset the router and can ping 192.168.1.1. Also able to enter in the login screen. But the default password: admin has not been the success you want to connect.

  Help, please

  Hello Sir,

  I've been using google chrome to run the installation program. It failed and when I use IE and followed the same steps, it has worked well.
  You have so much

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• For 2 days were not able to access the App Store and regular a few adds on my iPad, but can be downloaded on my iPhone. I have reset the router, iPads, etc... No change. Help, please

  I can't access AppStore and some other operations ordinary adds on my iPad. Have reset and all routers. All updates current. I can do on iPhone. Is it me or Apple or what? Help, please

  Hello there jacquelinefrombburg,

  Welcome to the communities of Apple Support! It is a great place to get help with connection problems to the App Store and access other applications on your iPad. I know that there are some applications that I rely on every day, so I'll do my utmost to help find a solution.

  As point of departure, we will you force him to close all open applications on your iPad. Once you've done that, go ahead and reboot your iPad. Once it is up and running, test on the App Store to see if you are able to access. Here are some useful resources to guide you through the process described above:

  Force a nearby application on your iPhone, iPad or iPod touch

  Restart your iPhone, iPad or iPod touch

  If you still have questions, see the steps in this article. Even though the title says iTunes Store, the recommendations would still apply to the App Store.

  If you cannot connect to the iTunes Store

  As a step in isolation, it would be wise to check if you have problems with the App Store and other applications while using a Wi - Fi connection and cell phone. If the problem persists with the two types of connection, try resetting the network settings on your iPad. Please note that you erase all the stored passwords and Wi - Fi networks. To complete this step, go to settings > general > reset > reset network settings. After you restart your iPad, test the apps again.

  Take care!

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Cannot search web sites unless I have reset firefox whenever I want to use firefox

  Whenever I open firefox and try and perform a search on any web site, Firefox stops working unless I have reset firefox. I don't want to do every time, it does specify that when firefox upgraded to 20.0.1

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating