Cannot access the data of a dvd burned using Windows Vista

Mr President.

We burned a dvd using the integrated software disc Vista burning... the procedure was as follows:

After inserting the disc, we formatted the disk by checking the "Quick Format" option... the format once completed, we pulled the folders n files that are supposed to be stored on the dvd n that the process has begun... After the end of the burn, the dvd is ejected automatically... but the dvd is not readable on other laptops or desktops... well helping... data are very IMP... We have no other backup data... and we have formatted the old laptop and upgraded to Windows 7...

Forward to your response

Kind regards

Hitesh Baku

How does the combustion process end - did you finish it or simply eject a DVD?  If you have completed it, exactly, that you have to finish?  What type of backup has been made (or did you use just copy/paste instead of the grogram backup) and what version of Vista are you using?  Did you use the live file format or the image ISO format http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html?  What kind of CD or DVD (CD, CD - R, CD + r, CD - RW, DVD, DVD - R,...)?

Insert the DVD into the drive and go into Windows Explorer and right-click on it and select explore.  Any files or folders appear?  Go to start / Control Panel / folder opt / view on the and make sure that the button to view the hidden files is checked.  Also check the box to show system files and uncheck to hide extensions of known file types (this can be useful later).  Nothing now watch or it always seems to be empty.

Go to start / Control Panel / administrative tools / computer management / disk management and check on the DVD in the car and tell me what it says on the size and the amount of available space (in other words, think data on the DVD).  Closer to your mouse on the DVD player and a text box appears above it lists criteria to this stationary player down.  Please post what he says EXACTLY, in the same order, as it is presented.  Does show as active for example?

Here are the instructions on how to copy data from a hard drive to a CD.  Read carefully.  You skip steps or fail to wait until the processes were completed before moving on to the next step?  If we know what hurts you, it may be possible to fix it - but I don't know (because I have no idea, but why it happened). http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.  Also, check out the following article, especially the section about closing or to finalize the process and see if you have done this http://windows.microsoft.com/en-us/windows-vista/Disc-burning-frequently-asked-questions.

Here is another article on how to burn a CD/DVD in Vista to test to see if you followed the procedures as indicated or anything left side: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

I believe that you have finished the session before it was finalized and it's the cause of your problem (assuming that Disk manager shows ALL the data on the dik at all - in which case I am afraid that the information was not stored on the CD/DVD and are not recoveralble, because there is nothing there to recover).  If the development is the issue, there may still be a way to finalize the disc - although I'll have to research further on this subject because I don't know how to finalize a disc that has already been ejected before it was finalized (and depends on what probably treat you used).

===========================================================================================================================

Even if you have your drive formatted and installed Windows7, it is still possible to recover some of the data that was stored there using special recovery software.  I don't know if these programs work with Windows7 (it is a forum for Vista) but you can check the details before you download them or go to the Windows7 Compatibility Center to see if they are listed http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx.

The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

I hope this helps and I look forward to your reply with the results of the options I suggested, the I asked you to perform checks and questions I asked (and I know there were many, but I'm not here in front of your computer with the disk to try things myself so the only way I'm collecting information that I need help (if possible) is to seek your help for) help me.  Thank you.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • VDP: Cannot access the data store

    Hello!

    I have a problem.

    Every day I see error for one of my servers in "reports":

    2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

    Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

    (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

    At the same time, I havn't this error for the other servers.

    "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

  • System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

    Original title: svchost (1020)

    Event type: error
    Event source: ESENT
    Event category: general
    Event ID: 490
    Date: 2010-10-19
    Time: 14:51:34
    User: n/a
    Computer: ROB
    Description:
    Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Hi Robrw,

    1. when exactly you receive this error?

    2. don't you make changes to the computer before this problem?

    You can try to rename the catroot2 folder and check if it helps.

    Step 1:

    a. Click Start and in run type C:\windows\system32 and click ok

    b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

    If you are not able to do the normal mode, try to start in safe mode and rename

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

    See the following article:

    How to capture a file or a folder in Windows XP

    http://support.Microsoft.com/kb/308421

    Step 3:

    You can also try to temporarily disable third-party security software and firewalls and check what is happening.

    Note: Activate the security software after the resolution of the problem.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

    Original title: Windows cannot install the drivers

    I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

    "The process cannot access the file because it is being used by another process".

    Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

    What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

    Hi paco2012,
     
    1. did you of recent changes on the computer?
    2. how many user accounts you have on the computer?
     
    Try these steps and check the result.
    Step 1: Install the driver as an administrator
    a. shut down the computer runs.
    b. start the computer and the connection as an administrator.
    c. find the driver configuration file, right-click on the file and click "Run as Administrator".
    d. follow the instructions in the wizard to install the driver.
    e. restart the computer once the driver is installed.
     
    Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot."
    c. restart the computer.
    d. install the driver and verify the result.
    e. follow "step 7: reset the computer to start as usual.
     
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

    When I start windows Vista, I get the error message:

    RunDLL
    Error loading C:\windows\system32\sshnas.dll

    The process cannot access the file because it is being used by another process.

    How can I fix?

    Hello

    It is the result of malware, then do a very thorough check and when the system is
    clean see the following message to remove this error.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • executable files: cannot access the file because it is being used by another process

    Hello
    I created a file named test.bat on my desk
    baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
    so, I closed my notebook and reopened, has added another "REM" and saved the file again.
    then I tried to rename, move the file to another folder and delete
    everything went without any problems.

    But if I create the file and run it, the command prompt will appear for a while and then disappear.
    I can rename or move the file without any problem,
    But if I try to edit the file in Notepad, I get this error:

    The process cannot access the file because it is being used by another process.

    and the file is not saved.

    also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
    When you try to rename/move this new file, I get another error:

    File Access Denied

    You need permission to perform this action

    You need the permission of the administrator of the computer to make changes
    in this file

    It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
    the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

    the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
    while I had no problem when I started in an old installation of windows xp and repeat the same steps.

    I tried to use the sysinternals utility handle, that's what I have:

    After creating test.bat:
    C:\Users\User>handle test.bat

    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    No found the corresponding handle.

    After you run test.bat:

    C:\Users\User>handle test.bat

    Handle v3.51
    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    System pid: 4 type: file A18: C:\Users\User\Desktop\t
    EST.bat

    has obtained the result above after attempting to remove test.bat also.

    After the creation of othertest.bat:

    C:\Users\User>handle othertest.bat

    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    No found the corresponding handle.

    After execution of othertest.bat:

    C:\Users\User>handle othertest.bat

    Handle v3.51
    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
    thertest.bat

    After you rename the othertest.bat:

    C:\Users\User>handle othertest.bat

    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    No found the corresponding handle.

    C:\Users\User>handle renamedtest.bat

    Handle v3.51
    Copyright (C) 1997-2013 Mark Russinovich
    Sysinternals - www.sysinternals.com

    System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
    enamedtest.bat

    the also occuars when I run any .exe file and delete it after its finished running, I deleted
    the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

    can someone help me?
    IAM using Windows 7 ultimate 64-bit.
    Thank you.

    I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

    Just found the answer:

    http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

    Activation of the service 'Application Experience' does the trick for me.

    If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

    Thank you Microsoft!

  • How can I fix this error: DF024: unable to preserve the original file to... Error 32 the process cannot access the file because it is being used by another process. SEQ (1352).  ?

    I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment.  The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)

    I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running.  There is no other users logged in to the machine.

    How can I see what another process is using the file necessary so that I can fix it?

    Thank you

    MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software.  You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  • Received the following message when you try to install Photoshop CC "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "So I use Windows Vista not sure do I

    Hello

    I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »

    I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.

    CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.

    System requirements | Photoshop

  • Cannot access the data on Western Digital My Book Essential.

    Original title: Western Digital My Book Essential

    Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop & office 'discover' for a long period of time.  An hour pending with Western Digital with no live person on the line.  Am now thinking the drive can't be fixed and Western Digital is not actually support.

    If I buy a replacement, how to make the data from the old to the new?  All suggestions will be useful.

    Moved from IE

    If you do not see the data, you can not transfer it. Keep trying with Western Digital.

  • my hard drive is on, but cannot access the data on it

    It is connected to the computer but I can't access the data on my hard drive is recognized. I went to the Device Manager it is there as a gateway usb device and it also says it has 0 MB on it but I have now, there is data on the hard drive. I don't know what to do because I can't move my family photos to this topic. I would like to get things out of here before I have to go to the extreme of formatting it again. Help, please.

    I realized what it was, I had to take the hard drive from the case and hang it in my lap and it works very well. the external hard disk is bad. I don't know how or why but it's bad

  • Cannot access the data on the old hard drive - old computer is dead

    I just bought new HP Pavilion a6547c desktop computer.  My old computer doesn't turn on.  Have hard drive in HP Tower.

    Computer recognizes it - are there files - but I can't access it.

    Have fallen by security and attempted to change the property - but get "unable to display current owner" from the old drive.

    I am the owner of the old drive.

    Someone knows how to fix this?

    Hi DebbyO

    Please download and install the fix from the following link.

    http://www.howtogeek.com/downloads/TakeOwnership.zip

    Please check out the TakeOwnership.zip file on the desktop, and then double-click the InstallTakeOwnership.reg file to install it.  Then navigate to the folder that you are trying to access, right-click on the folder and click Take Ownership.

    Now try to access the folder. You should be able to access the folder and view your files.

  • the process cannot access the file because it is being used by another process

    Hi, hope someone can help with this,

    I am running windows vista basic 32-bit on a dell inspiron 1520

    I received several messages a day saying "superfetch has stopped working" or "windows search protocol has stopped working" I was advised to run sfc/scannow from command prompt I did the sfcdetails read as follolws.

    2010-09-15 13:55:16, Info CSI 00000185 [SR] cannot repair the military record [l:24 {12}] "cryptsvc.dll" Microsoft-Windows-cryptsvc-dll, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "

    Following the advice of another thread, I extracted the file from my Vista DVD and stored in c:\windows\temp, but when I try to copy in c:\windows\system32 I get a message saying that the file is being used by another process.

    I'm not sure what the file is still so I don't know how use it.

    Any help would be much appreciated.

    Thank you.

    The file in the folder system32 first TakeOwnership. Then copy from a command prompt with admin rights:

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Cannot access the drive Lacie D2 Quadra (1 TB), Windows says you want to format.

    Original title: my drive hard Lacie cannot be seen by Windows Vista

    I have a Lacie D2 Quadra (1 to) I've had for a year now, which worked fine under Vista until about a month when I did a windows update. Since then, he said, I had to reformat my hard drive. Needless to say, I don't want to do that. (I have all my files there) I tried it back before the update, but it still can not read the disc and still tells me to reformat.  I had a friend check it for viruses and found none and the drive worked on his computer. I ran antivirus on my computer and the drive and nothing. then check that the drivers are up to date... they are. can someone help me.

    Hello

    What is the stratus of the device in Device Manager?

    Step 1: Run the following article fixit tool and check.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Step 2: Search for the issue in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    a. click Start, type msconfig in the search box
    b. press ENTER.

    The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
    d. When you are prompted, click on restart to restart the computer.

  • Cannot access the drives on my pc through my computer vista laptop windows 7

    I'm trying to network my vista pc and my laptop win 7.  See the vista pc and have access to all files and drives on my laptop win 7.  But my laptop win 7 can't access the drives (I have 2) on my vista pc.  The win 7 see the vista on my network pc.  I can access the vista computer, I can see readers, but access is denied to 'no permission, contact your administrator. "  The public record access very well, but not the 'c' and 'n' readers.  "N" is an extra internal drive, which I added.

    I double checked that the readers are shared, said permission to everyone, even turn off the password just in case.

    I have read another view and tried everything that seems near, please help.

    I am also able to connect to my vista through Windows Media Player media files.  Just not able to access my files in the readers.

    In Vista, go to start / network / network and sharing Center and make sure network sharing, file sharing, sharing protected by password and share multimedia files are all checked.

    If this isn't the problem, please repost your question in the Forums of Windows7 (that you are able to access Vista and not of Windows7 is a Windows7 problem - although it probably involves some changes in Vista as well) to: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where people who specialize in issues of Windows7 will be more than happy to help you with your problem.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot access the HP laptop Bluetooth functionality after upgrading Windows XP to Windows 7

    Original title: reinstall the Bluetooth Driver

    I have a 32 bit HP under Windows 7 Pro laptop.

    My machine originally came with XP but when I upgraded the hard drive, I switched to Win7 Pro.

    I can't access the Bluetooth of the machine functionality.  It does not appear in Control Panel or Device Manager.

    HP broke off my machine, so their drivers are limited to XP versions.

    Any suggestions on how to reinstall a driver?

    Hey Parker,

    As you have upgraded to Windows 7 from your pre-installed Windows XP laptop, as the HP laptop is configured to meet the requirement of Windows XP operating system and it is better you contact HP support for an answer to the question and guide you in the right direction by following the links below.

    Contact HP:
    http://welcome.HP.com/country/us/en/contact_us.html

     

    Post your question in the Forums of HP Support:

    http://h30434.www3.HP.com/PSG/

    I hope that the information above helps you.

Maybe you are looking for