Cannot access the drive Lacie D2 Quadra (1 TB), Windows says you want to format.

Similar Questions

• Cannot access the drives on my pc through my computer vista laptop windows 7

  I'm trying to network my vista pc and my laptop win 7.  See the vista pc and have access to all files and drives on my laptop win 7.  But my laptop win 7 can't access the drives (I have 2) on my vista pc.  The win 7 see the vista on my network pc.  I can access the vista computer, I can see readers, but access is denied to 'no permission, contact your administrator. "  The public record access very well, but not the 'c' and 'n' readers.  "N" is an extra internal drive, which I added.

  I double checked that the readers are shared, said permission to everyone, even turn off the password just in case.

  I have read another view and tried everything that seems near, please help.

  I am also able to connect to my vista through Windows Media Player media files.  Just not able to access my files in the readers.

  In Vista, go to start / network / network and sharing Center and make sure network sharing, file sharing, sharing protected by password and share multimedia files are all checked.

  If this isn't the problem, please repost your question in the Forums of Windows7 (that you are able to access Vista and not of Windows7 is a Windows7 problem - although it probably involves some changes in Vista as well) to: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where people who specialize in issues of Windows7 will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• cannot access the drive of bitlocked after reinstalling windows

  Hey guys!

  I had locked a drive using bitlocker. I reinstalled my windows! now, I can't access the drive (I didn't turn off bitlocker or suspended.)

  When I click on the drive it says you have to format it! and when I click on format it says is impossible to format!

  I have 40 GB of data that I can't lose!

  pliz help me!

  You need a certificate to access a bitlocked drive.

  BitLocker Repair tool to recover a disk

  http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/19f28028-EACE-4878-b5e5-8cd78c19f6f3
  If that fails, then you have to recover your files from your external backup media.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• HL-dt-st dvdram gsa-t20n ata device. Windows cannot load the driver for this hardware device. Windows Vista.

  my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.

  Hello

  1. were there any (hardware or software) changes to the computer?

  Run the FixIt and check if the problem is solved or not.

  Your CD or DVD drive cannot read or write media (Fixit)

  Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

  Hope that helps.

• Cannot access the drive HARD Toshiba PX1267E - 1 32 - file ONSPCCH.ini problem

  I have a Toshiba PX1267E - 32 1 external hard drive as well. It was working fine with my Vista Home Premium OS and has all my data backup on it. It has been password protected.

  My desktop HARD drive failed last week and was replaced and an old recovery disc of 12 months used to rebuild.

  I then tried to access the external HARD disk to restore the backup I ran the day before the accident, but when I enter the password (that I know is certainly correct) I get the same error as others posting here. He suggested that the input data does not match the information contained in the ONSPCCH.ini file.

  I can't disable or change the password as will erase all the data on the external HARD drive. The previous messages direct me on the site of Toshiba, but the options to download an updated driver is no longer correspond to the options available online.

  Help, please! :-(

  Paul

  Hello

  Strange what s...
  But someone pointed out that he could solve the issue with another USB cable. Did you check that?

  It s worth a try! ;)

  Welcome them

• HP ENVY 15-j181na N: TouchSmart cannot access the driver download page!

  Hello, since yesterday I am trying to download hp envy Touch smart 15-j181na notebook drivers, but it gets stuck to the loading screen: "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "and nothing ever happends, pls help me because I did a fresh install of Windows 7 64 BIT and I need the drivers, thanks in advance.

  Hello:

  The HP support pages did not work for several days.

  HP is aware of the issue and working to resolve it.

  For now, try the W7 x 64 drivers and software from the HP 450 G2 on your model except the graphics, the BIOS and firmware files.

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827&swLangOid=8&swEnvOid=4058

  The graphics... try this...

  1. install the driver Intel chipset installation utility of the model above and restart.

  2. install the Intel graphics driver and restart.  The second listed driver is the automatic installation file.

  https://Downloadcenter.Intel.com/download/24964/Intel-Iris-Iris-Pro-and-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

  3. install nVidia HD graphic driver and restart.

  http://www.nvidia.com/download/driverResults.aspx/86506/en-us

• "Backup and Restore Center" I cannot access the drive c: for backup

  I'm attmpting to make a backup using the "back up and Restore Center."  On the screen, which asks "which disks do you want to include in the backup?" it shows my C: drive but does not allow me to select.   C: drive is 254.1 GB and nothing 416,7 GB of free space on my external hard drive.  Please let me know my options.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Cannot access the HP laptop Bluetooth functionality after upgrading Windows XP to Windows 7

  Original title: reinstall the Bluetooth Driver

  I have a 32 bit HP under Windows 7 Pro laptop.

  My machine originally came with XP but when I upgraded the hard drive, I switched to Win7 Pro.

  I can't access the Bluetooth of the machine functionality.  It does not appear in Control Panel or Device Manager.

  HP broke off my machine, so their drivers are limited to XP versions.

  Any suggestions on how to reinstall a driver?

  Hey Parker,

  As you have upgraded to Windows 7 from your pre-installed Windows XP laptop, as the HP laptop is configured to meet the requirement of Windows XP operating system and it is better you contact HP support for an answer to the question and guide you in the right direction by following the links below.

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

   

  Post your question in the Forums of HP Support:

  http://h30434.www3.HP.com/PSG/

  I hope that the information above helps you.

• Cannot access the data of a dvd burned using Windows Vista

  Mr President.

  We burned a dvd using the integrated software disc Vista burning... the procedure was as follows:

  After inserting the disc, we formatted the disk by checking the "Quick Format" option... the format once completed, we pulled the folders n files that are supposed to be stored on the dvd n that the process has begun... After the end of the burn, the dvd is ejected automatically... but the dvd is not readable on other laptops or desktops... well helping... data are very IMP... We have no other backup data... and we have formatted the old laptop and upgraded to Windows 7...

  Forward to your response

  Kind regards

  Hitesh Baku

  How does the combustion process end - did you finish it or simply eject a DVD?  If you have completed it, exactly, that you have to finish?  What type of backup has been made (or did you use just copy/paste instead of the grogram backup) and what version of Vista are you using?  Did you use the live file format or the image ISO format http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html?  What kind of CD or DVD (CD, CD - R, CD + r, CD - RW, DVD, DVD - R,...)?

  Insert the DVD into the drive and go into Windows Explorer and right-click on it and select explore.  Any files or folders appear?  Go to start / Control Panel / folder opt / view on the and make sure that the button to view the hidden files is checked.  Also check the box to show system files and uncheck to hide extensions of known file types (this can be useful later).  Nothing now watch or it always seems to be empty.

  Go to start / Control Panel / administrative tools / computer management / disk management and check on the DVD in the car and tell me what it says on the size and the amount of available space (in other words, think data on the DVD).  Closer to your mouse on the DVD player and a text box appears above it lists criteria to this stationary player down.  Please post what he says EXACTLY, in the same order, as it is presented.  Does show as active for example?

  Here are the instructions on how to copy data from a hard drive to a CD.  Read carefully.  You skip steps or fail to wait until the processes were completed before moving on to the next step?  If we know what hurts you, it may be possible to fix it - but I don't know (because I have no idea, but why it happened). http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.  Also, check out the following article, especially the section about closing or to finalize the process and see if you have done this http://windows.microsoft.com/en-us/windows-vista/Disc-burning-frequently-asked-questions.

  Here is another article on how to burn a CD/DVD in Vista to test to see if you followed the procedures as indicated or anything left side: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

  I believe that you have finished the session before it was finalized and it's the cause of your problem (assuming that Disk manager shows ALL the data on the dik at all - in which case I am afraid that the information was not stored on the CD/DVD and are not recoveralble, because there is nothing there to recover).  If the development is the issue, there may still be a way to finalize the disc - although I'll have to research further on this subject because I don't know how to finalize a disc that has already been ejected before it was finalized (and depends on what probably treat you used).

  ===========================================================================================================================

  Even if you have your drive formatted and installed Windows7, it is still possible to recover some of the data that was stored there using special recovery software.  I don't know if these programs work with Windows7 (it is a forum for Vista) but you can check the details before you download them or go to the Windows7 Compatibility Center to see if they are listed http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx.

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Here are some free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it does not also the chances of recovery are very slim, but we invite you to try other options if you want)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  I hope this helps and I look forward to your reply with the results of the options I suggested, the I asked you to perform checks and questions I asked (and I know there were many, but I'm not here in front of your computer with the disk to try things myself so the only way I'm collecting information that I need help (if possible) is to seek your help for) help me.  Thank you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the mapped drive frrom command prompt

  I have two network drives mapped on my Windows 7 Professional machine.  A disc goes to anothetr computer on my network and the other goes to a share through a VPN

  I can see the two and do actions from the Explorer (they still call it that?)

  but when I try to access it from a command prompt or the drive letter, I can use it system cannot find the drive specified... huh?

  Reset you the Protocol TCP/IP - Fixit

  http://support.Microsoft.com/kb/299357

  Command prompt window opened with elevated privileges and type

  IPCONFIG/flushdns

  Press enter

  Reset the default Host file

  FixIt - How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• Cannot access the network drive after trying to change the shared folder.

  I had a 80 GB drive connected to my E3000 for a few years and it worked without problem. I recently turned to a 250 GB Maxtor One Touch drive. When I plugged it, the router automatically creates a shared folder. I was able to connect to this folder without problem, but I wanted to share the whole score. When I made this adjustment and tried to save the settings, I temporarily lost access to the router. He gave me the standard page cannot be error message appears. When I got access changes seem to be made. When I try to access the drive of my laptop I get this error message, "the mapped network drive could be created", "the name specified network is no longer available". I rebooted and power rolled my router as well reconnected the drive.

  I think that since you have replaced your hard drive, old settings are configured may still on the hard drive of old. You can change the users and group so that it syncs with the new hard drive or start from scratch (reformat the hard drive).

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!