Cannot access the page e-mail channels to configure the served user's email

Similar Questions

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• Cannot access the local users and groups

  Hello everyone, I got this error since April 2010:
  Cannot access the computer ComputerName. The error was: invalid syntax.

  It is not really bad for me, because I used to use the cmd console.

  I followed several recommendation to solve this error, but without success. Many colleagues have the same error. About 100 of the 500 have this problem.
  Don't tell me to reinstall the PC because it is not possible. I have no spare time to set my PC again and install all required software. And to reinstall the PC isn't sollution.

  Re-register the dll or other files not work. Not work replace the msc or cpl files. Installation of the admin packs, technical resource kits or installer also not work.

  No errors in the application logs, no errors in the system log, no errors in the security logs. GPO is clear. The same mistake in compmgmt.msc, lusrmgr.msc, or when I add the MMC snap-in. So I guess that the error in the XML (MS XML) parser tool or in the msc file.

  Do someone have the solution for this?

  Yet once the relocation no solution!

  Hi Peter,.

  In this case, I would say that you post your question in the Microsoft TechNet forums such that there is a problem with more than 100 computers.

  Windows XP IT Pro category

• Customer remote cannot access the server LAN via VPN

  Hi friends,

  I'm a new palyer in ASA.

  My business is small. We need to the LAN via VPN remote client access server.

  I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

  Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

  Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

  Who can help me?

  Thank you very much.

  The following configuration:

  ASA Version 7.0(7)
  
      !
  
      hostname VPNhost
  
      names
  
      dns-guard
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 10
  
      ip address 221.122.96.51 255.255.255.240
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.42.199 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      management-only
  
      !
  
      ftp mode passive
  
      dns domain-lookup inside
  
      access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
  
      access-list allow_PING extended permit icmp any any inactive
  
      access-list Internet extended permit ip host 221.122.96.51 any inactive
  
      access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
  
      access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
  
      access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
  
      access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
  
      pager lines 24
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip local pool testpool 192.168.43.10-192.168.43.20
  arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list VPN
  
      nat (inside) 1 access-list PAT_acl
  
      route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
  
  
      username testuser password 123
  
      aaa authentication ssh console LOCAL
  
      aaa local authentication attempts max-fail 3
  no sysopt connection permit-ipsec
  
      crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
  
      crypto dynamic-map dyn1 1 set transform-set FirstSet
  
      crypto dynamic-map dyn1 1 set reverse-route
  
      crypto map mymap 1 ipsec-isakmp dynamic dyn1
  
      crypto map mymap interface outside
  
      isakmp enable outside
  
      isakmp policy 1 authentication pre-share
  
      isakmp policy 1 encryption des
  
      isakmp policy 1 hash md5
  
      isakmp policy 1 group 2
  
      isakmp policy 1 lifetime 86400
  
      isakmp nat-traversal  3600
  
      tunnel-group testgroup type ipsec-ra
  
      tunnel-group testgroup general-attributes
  
      address-pool testpool
  
      tunnel-group testgroup ipsec-attributes
  
      pre-shared-key *
  
      telnet timeout 5
  ssh timeout 10
  
      console timeout 0
  : end
  

  Topology as follows:

  

  Hello

  Configure the split for the VPN tunneling.

  1. Create the access list that defines the network behind the ASA.

     ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0 

  2. Mode of configuration of group policy for the policy you want to change.

     ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

  3. Specify the policy to split tunnel. In this case, the policy is tunnelspecified.

     ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 

  4. Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

     ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List 

  5. Type this command:

     ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes 

  6. Associate the group with the tunnel group policy

     ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn 

  7. Leave the two configuration modes.

     ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

  8. Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

  Kind regards
  Abhishek Purohit
  CCIE-S-35269

• Cannot use the set option in WMP, error: Media is not available and cannot access the server.

  Original title: W7 error play "Media is not available.

  On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?

  What exact model Sony TV? You may need to install additional software
  See the content if you want to browse the content on the computer from the computer
  the TV. as to play to, see
  http://blogs.msdn.com/b/E7/archive/2009/05/12/media-streaming-with-Windows-7.aspx
  for beginners.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Cannot access the Server Workspace external URL

  I am able to access everything successfully while I'm on the server, but I can't seem to access the URL of the external workspace to the server
  Here are my steps/symptoms:
  
  -All URLS are running on the server, (for this example, I'm mostly focused on FDM and workspace)
  using http://localhost/hyperionfdm and http://localhost:19000/workspace/index.jsp
  
  -Turn off the server I use correctly the URL below, FDM url functions but workspace does not have.
  http://Generic.com/hyperionfdm and http://generic.com:19000/workspace/index.jsp
  
  I also tried http://generic:19000/workspace/index.jsp and http://generic.com/workspace/index.jsp but no work
  
  -When I try http://generic.com/hfm off the server, I get a page with just "hfm" on this subject. I understand that this isn't a road to the workspace but that he wanted to provide the information, since it came on other threads that I read while researching this.
  
  I re - run the EPM system for web server configuration, but it doesn't seem to change anything.
  
  Please let me know if you have any ideas on anything to check or how to solve this problem.
  
  Thank you

  What is generic.com? What is a load balancer or a simple dns name?

  If it's a load balancer might be mapping generic.com to port 80. Which means that it is mapping to IIS (80) instead of the server (19000) web of OSH. In this scenario, there would be no logic to a port after it because it would be not mapped hollow LB.

  Get the IP address of the host and, also, to check the ip address of generic.com using NSlookup - are they the same ip address? If not - you have a load balancer and need to reconfigure it to point to 19000 (or reconfigure your ports)

  If they are the same.

  from the telnet ip 19000 host work? -If not maybe he doesn't listen on the adapter and only localhost or some IPv6 issue.

  off-host telnet ip 19000 work? If this is not the case, perhaps you have a firewall in place blocking port 19000.

  Check ipconfig on the host - are there multiple cards?

  Thank you
  Nick

• Cannot access the server from vsphere client

  Hi, people.

  After having been very well for a few weeks, now I'm unable to access my server from vSphere client, I get an error of:

  Call 'ServiceInstance.RetrieveContent' to object 'ServiceInstance' on the server '192.168.6.2' failed.

  I've attached screenshots of the error message.

  The pc and the server are on the same subnet, and the error comes from several PCs that try to connect.

  Help, please!

  NM

  So I think you must restart these services as vivari said.

  If you are unable to log in via ssh, you must have access to the consoles. Then, you can restart the services or enable ssh to do via ssh.

• After the upgrade to 754035, cannot access the server

  In Edit-preferences-shared VMs, workstation server settings is enabled, but I get the error (even when of WS running as root):

  Unable to connect to the server of workstation. Please ensure that the server is running and that you are allowed to connect.

  -It is true that I have not test this before the upgrade.

  WS Server uses the default port 443, nothing else should be listening on it.

  # netstat - nalp | grep 443
  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 16082/vmware-pass
  TCP 0 0 127.0.0.1:41675 127.0.0.1:443 ESTABLISHED 16130/vmware
  TCP 0 0 127.0.0.1:443 ESTABLISHED 16082/vmware-pass 127.0.0.1:41675
  TCP 0 0 192.168.2.54:33662 74.125.227.117:443 ESTABLISHED 15280/firefox
  tcp6 0 0: 443: * LISTEN 16082/vmware-pass

  The host is running a new installation of Linux Mint 13, core 3.2.0 - 23-generic #36 - Ubuntu SMP Linux 64-bit

  Note: I use the session X as user "dave" and vmware workstation will be started as "dave2":

  Dave ~ $ "sudo knew dave2 vmware."

  Hello

  are there updates after your last post?

• Cannot access the server gmail via any web browser; code 105 error message cannot access server

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: have cleared cache, spilled all saved passwords and I can not even access accounts gmail via Google Chrome; Internet Explorer or Firefox... I can not access through my laptop but can access files in gmail on other public computers

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Google.com/support/forum/p/chrome/thread?TID=1b6ea4f035dadc16&hl=en

• I cannot access the application "contact me" when a website, get error "Default Mail Client not properly installed."

  I cannot access the application 'contact me' when a web site and receive the answer "Default Mail Client not properly installed" instead of going on the requested site.

  How can I fix this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE8-default-mail-client-not-properly-installed/23c2a9e1-d1fa-4a50-aeb1-90a6f2af717f

  CrystalBall © SEZ...

  Unlike Windows XP & Vista, Windows 7 does not include a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/forums.aspx?productid=15

• Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002.

  Cannot access my Windows Live Mail. Gives me the message "one of the installation files seems to be corrupted. Error: 0 x 80070002. Source: WaitForCatalogue.

  original title: error 8 x 0070002

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• When I receive e-mails with an attachment can not open, it says: Windows media player cannot access the file, Please HELP

  WHEN I RECEIVE AN EMAIL WITH AN ATTACHMENT I CAN'T OPEN IT. IT SAYS WINDOWS MEDIA PLAYER CANNOT ACCESS THE FILE.

  Help, please

  How this is related to Windows Update, John?

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo