Cannot access the server from vsphere client

Similar Questions

• After an attack of virus on the server, I am unable to connect to the server from any client computer.

  After an attack of virus on the server, I am unable to connect to the server from any client computer.

  Applies to: Windows | Windows XP | Networking, Mail, and getting online

  I have a small net work in my house, and until yesterday, the network works well. MSSE clean virus win32 on my server attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. I used MS Fixit widjows firewall and then problem determination after the Client computer request user name & against which I entered the login data, password but it displays the same error message.

  PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  Hello

  Because the problem is with the server, I recommend you post this question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Customer remote cannot access the server LAN via VPN

  Hi friends,

  I'm a new palyer in ASA.

  My business is small. We need to the LAN via VPN remote client access server.

  I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

  Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

  Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

  Who can help me?

  Thank you very much.

  The following configuration:

  ASA Version 7.0(7)
  
      !
  
      hostname VPNhost
  
      names
  
      dns-guard
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 10
  
      ip address 221.122.96.51 255.255.255.240
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.42.199 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      management-only
  
      !
  
      ftp mode passive
  
      dns domain-lookup inside
  
      access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
  
      access-list allow_PING extended permit icmp any any inactive
  
      access-list Internet extended permit ip host 221.122.96.51 any inactive
  
      access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
  
      access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
  
      access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
  
      access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
  
      pager lines 24
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip local pool testpool 192.168.43.10-192.168.43.20
  arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list VPN
  
      nat (inside) 1 access-list PAT_acl
  
      route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
  
  
      username testuser password 123
  
      aaa authentication ssh console LOCAL
  
      aaa local authentication attempts max-fail 3
  no sysopt connection permit-ipsec
  
      crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
  
      crypto dynamic-map dyn1 1 set transform-set FirstSet
  
      crypto dynamic-map dyn1 1 set reverse-route
  
      crypto map mymap 1 ipsec-isakmp dynamic dyn1
  
      crypto map mymap interface outside
  
      isakmp enable outside
  
      isakmp policy 1 authentication pre-share
  
      isakmp policy 1 encryption des
  
      isakmp policy 1 hash md5
  
      isakmp policy 1 group 2
  
      isakmp policy 1 lifetime 86400
  
      isakmp nat-traversal  3600
  
      tunnel-group testgroup type ipsec-ra
  
      tunnel-group testgroup general-attributes
  
      address-pool testpool
  
      tunnel-group testgroup ipsec-attributes
  
      pre-shared-key *
  
      telnet timeout 5
  ssh timeout 10
  
      console timeout 0
  : end
  

  Topology as follows:

  

  Hello

  Configure the split for the VPN tunneling.

  1. Create the access list that defines the network behind the ASA.

     ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0 

  2. Mode of configuration of group policy for the policy you want to change.

     ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

  3. Specify the policy to split tunnel. In this case, the policy is tunnelspecified.

     ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 

  4. Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

     ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List 

  5. Type this command:

     ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes 

  6. Associate the group with the tunnel group policy

     ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn 

  7. Leave the two configuration modes.

     ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

  8. Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

  Kind regards
  Abhishek Purohit
  CCIE-S-35269

• cannot access the internet from the desktop

  I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.

  Hello

  Are you using the right Internet Explorer?

  There are two more separate... From the start screen and another completely different for the office.

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• Cannot use the set option in WMP, error: Media is not available and cannot access the server.

  Original title: W7 error play "Media is not available.

  On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?

  What exact model Sony TV? You may need to install additional software
  See the content if you want to browse the content on the computer from the computer
  the TV. as to play to, see
  http://blogs.msdn.com/b/E7/archive/2009/05/12/media-streaming-with-Windows-7.aspx
  for beginners.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to remove the server from vSphere VI3 licenses 4?

  Hi all

  In the application of the license of our environment vSphere 4, I always cited the old server license VI3. Since we do not use it more (whatever it is has been upgraded to vSphere 4 a long time ago), we have disabled and therefore vCenter complains somewhere in the newspapers not being able to communicate with her.

  However, I couldn't find an easy way to remove it from vSphere licenses... Does anyone have an idea?

  Andreas

  - Blog of experience front of VMware

  in vCenter go Administration - vCenter Server Settings - authorization - license server.  Delete the entry and uncheck the box «reconfigure...» »

• Cannot access the Server Workspace external URL

  I am able to access everything successfully while I'm on the server, but I can't seem to access the URL of the external workspace to the server
  Here are my steps/symptoms:
  
  -All URLS are running on the server, (for this example, I'm mostly focused on FDM and workspace)
  using http://localhost/hyperionfdm and http://localhost:19000/workspace/index.jsp
  
  -Turn off the server I use correctly the URL below, FDM url functions but workspace does not have.
  http://Generic.com/hyperionfdm and http://generic.com:19000/workspace/index.jsp
  
  I also tried http://generic:19000/workspace/index.jsp and http://generic.com/workspace/index.jsp but no work
  
  -When I try http://generic.com/hfm off the server, I get a page with just "hfm" on this subject. I understand that this isn't a road to the workspace but that he wanted to provide the information, since it came on other threads that I read while researching this.
  
  I re - run the EPM system for web server configuration, but it doesn't seem to change anything.
  
  Please let me know if you have any ideas on anything to check or how to solve this problem.
  
  Thank you

  What is generic.com? What is a load balancer or a simple dns name?

  If it's a load balancer might be mapping generic.com to port 80. Which means that it is mapping to IIS (80) instead of the server (19000) web of OSH. In this scenario, there would be no logic to a port after it because it would be not mapped hollow LB.

  Get the IP address of the host and, also, to check the ip address of generic.com using NSlookup - are they the same ip address? If not - you have a load balancer and need to reconfigure it to point to 19000 (or reconfigure your ports)

  If they are the same.

  from the telnet ip 19000 host work? -If not maybe he doesn't listen on the adapter and only localhost or some IPv6 issue.

  off-host telnet ip 19000 work? If this is not the case, perhaps you have a firewall in place blocking port 19000.

  Check ipconfig on the host - are there multiple cards?

  Thank you
  Nick

• After the upgrade to 754035, cannot access the server

  In Edit-preferences-shared VMs, workstation server settings is enabled, but I get the error (even when of WS running as root):

  Unable to connect to the server of workstation. Please ensure that the server is running and that you are allowed to connect.

  -It is true that I have not test this before the upgrade.

  WS Server uses the default port 443, nothing else should be listening on it.

  # netstat - nalp | grep 443
  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN 16082/vmware-pass
  TCP 0 0 127.0.0.1:41675 127.0.0.1:443 ESTABLISHED 16130/vmware
  TCP 0 0 127.0.0.1:443 ESTABLISHED 16082/vmware-pass 127.0.0.1:41675
  TCP 0 0 192.168.2.54:33662 74.125.227.117:443 ESTABLISHED 15280/firefox
  tcp6 0 0: 443: * LISTEN 16082/vmware-pass

  The host is running a new installation of Linux Mint 13, core 3.2.0 - 23-generic #36 - Ubuntu SMP Linux 64-bit

  Note: I use the session X as user "dave" and vmware workstation will be started as "dave2":

  Dave ~ $ "sudo knew dave2 vmware."

  Hello

  are there updates after your last post?

• Cannot configure the firewall using vSphere client (access to ESX 4i)

  I can't acess the firewall by using the client vSphere connection to a host of 4i ESX.  I select the host & gt; configuration & gt; Safety profile & gt; and it flashes firewall briefly, but then watch as services (two) (VMware vCenter Agent (arrested) and NTP daemon (started).

  Clues?  I restarted services (and the host itself).

  ESXi should be behind a firewall because there is no firewall integrated its own.

  If you find this or any other information useful or appropriate, please consider giving points.

• Cannot access the calendar from Windows Vista Home Premium all of a sudden... get error message indicating it is disabled... Help, please!

  After 1 year with the help of Windows Calendar on Vista Home Premium, I'm suddenly not able to use it (impossible to add new appointments and stored all appointments have mysteriously disappeared). I get a message saying "You cannot add appointments to a calendar that is disabled" the details of State "access denied." ... How is - it happened 'out of nowhere '? How to activate it? It's very frustrating... I searched the forums and Microsoft google the question. I found some results suggesting to either change the registry or download the fix automatically and manually merge in my registry. I tried both with no result. I have event tried to remove the old calendar and create a new one... still nothing. Any suggestions? Help, please!

  Hello NYintelligentinvestor,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that.  What type of entry you are trying to add?

  Look at the calendar and on the left side, to half way down you will see a small block that will have something like "NYintelligentivnestor schedule" - there is a small block to the left of this one. To activate the calendar, click on the box to place a check mark in it.

  If there are calendar shown in this block, then go to "file" on the main toolbar and click on "new calendar" - one should then appears in a block with a check mark in the box on the left.

  I hope this helps. Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the server gmail via any web browser; code 105 error message cannot access server

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: have cleared cache, spilled all saved passwords and I can not even access accounts gmail via Google Chrome; Internet Explorer or Firefox... I can not access through my laptop but can access files in gmail on other public computers

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Google.com/support/forum/p/chrome/thread?TID=1b6ea4f035dadc16&hl=en