Cannot access the playlists in the music app

Similar Questions

• 42RL833 - latest Firmware installed and cannot access the YouTube app

  I have 42RL833 Toshiba which is updated to the latest firmware, however I still cannot access the application on my YouTube. I get an error saying that Youtube XL is no longer supported.

  What can I do to fix this?

  > I get an error saying that Youtube XL is no longer supported.

  Google has stopped the YouTube XL service and, therefore, this service isn't available anymore.
  http://www.Toshiba.EU/innovation/generic/YouTube-XL/

  You can read details here:
  https://support.Google.com/YouTube/answer/3123170?hl=en

  It also seems that YouTube XL has been replaced by YouTube Leanback Lite:
  http://www.YouTube.com/leanbacklite
  See also:
  https://support.Google.com/YouTube/answer/3153576#

  There is also a note that if you can connect your computer to your TV, you can continue to use the YouTube TV-optimized experience by visiting youtube.com/tv.

• cannot access the settings app

  I got a new internet modem installed at home. Now my Iconia B1 won't let me access the settings page - a little green Android figure/page immediately comes up saying update NOW. PLEASE READ! DO NOT TURN OFF OR RESTART YOUR PHONE DURING THE UPDATE. PLEASE TRY AGAIN LATER. This happened for two days.

  Someone at - it suggestions? I tried to restart the Tablet, the same thing. Called Acer people but b/c, the Tablet is spent a year warranty, they want the thing worth to help me. THX.

  OK, so probably there is a problem with the data cache or a system.

  Watch this video to do a hard reset (you will lose all your data personal, so backup first)

  http://youtu.be/WioXs4vTG10

• Cannot access the Mac App Store since the 10.11.2 upgrade

  Click on the store icon, store to open with the wheel that turns, but never shows the content pages?

  You have NTFS autour drives?

  Try to restart in Safe Mode - which clears and regenerates the cache and see if that clears this?

  An adware or other such installed?  If you are not sure, Etrecheck can generate a diagnostic report which can then be published here.

• Unable to connect to the application Windows 8 music. I get an error "Cannot access the file."

  Hello

  When I open the Windows 8 Xbox music app I can't connect. Here's the exact error code.
  "Cannot access the file. Make sure that the file is not in use, you can access the file is stored, and that your network proxy settings are correct, and then try again.
  Error code: 0xc00d11d2 (0x80070005)
  I can sign in all other Windows 8 modern Apps without problem.
  Thank you
  Andy

  I created a local account and recreated my Windows Live profile and that fixed the issue.

  Thanks for your help.

• How can I access the 'now playing' when first opening the music app?

  How can I access the 'now playing' when first opening the music app? There is no tab or option like in previous iOS, would be in the upper right

  When the music is playing, slide up from the bottom of the home screen to see the center of control and current reading is also there.

• Writing files apps get the "Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you the items"error

  It only occurs with certain applications. Firefox and steam (the game application), for example.

  He regularly happening when trying to download a file with Firefox, regardless of the folder I tried to save the item to. Helped Disabling UAC. Sometimes, even when from time to time, however. I usually just download the file again in the same place, and it works fine.

  With steam, it happens 100% of the time when he tries to update. I am trying to troubleshoot with them, but I strongly suspect that there is an underlying problem related to Windows. I am running Windows 7 Home Premium 64-bit.

  It may be relevant that all my files have the blob (not checked) in the box 'read only '.

  There has been no recent changes to my computer.

  I tried:

  Creating a user profile. The question persists while the user as well.
  Using the attrib command from the command prompt to reset the properties of the folder.
  Run the checker system (no errors found) files.
  Taking possession of the records.
  Make sure that I have all the permissions with folders.
  Right click to run applications as an administrator.
  Check if the requests are blocked.
  Try start mode selective (Microsoft, no startup application services).
  Re-registration of Windows install.

  My antivirus software is Microsoft Security Essentials. I did full scans. It prompted me without warning.

  Hello

  Are you having the same problem during the download of Internet Explorer?
   
  Method 1:
  I suggest you try the procedure described in the article and see if it helps.
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  Note: There is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
   
  Method 2:
  If the problem is not resolved I suggest you to save the files and run an upgrade on the spot to repair permissions.
   
  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099
   

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Hope this helps and keep us posted.
   
   

• Can you still use stars to rate songs in the music app?

  Can you still use stars to rate songs in the music app?  That's how my itunes library is organized, and when I get new songs on my phone I would rate it.

  Hi Eric,.

  Yes, you can always classify a song with stars in the app music with iOS 9.2.   When you choose to start a song, the Miniplayer will appear.  Tap the song title to see the player Now Playing view (full-screen).  Tap the title again in this point of view and you will see five points.  Press the point that represents your side.  (Ex. If you type the fourth point, you will see four stars).

  The now playing view will remain open, it will be later songs of rate they play.  Pressing the arrow down in the upper left corner will take you back to the sight of MiniPlayer.

  Here is some additional information on the new music app:

  With the help of the new music app

  My Music & Playlists

  The My Music tab makes it easy to navigate through all of your music, everywhere where it is-on the iTunes Store, a rare import CD or your subscription to Apple's music. Whenever you add a song, album, or playlist, keep us at the top of my music in recently added. Press the category below picker recently added to sort and view your music by artists, Albums, songs, music videos, Genres, composers, and Compilations.

  Play your music

  

  When you play a song, you see the Miniplayer at the bottom of the screen. You can continue to browse other titles to find the next perfect song.

  

  Or you can tap or slide up on the Miniplayer to see the display of current playback and controls. Press on the in the upper left corner or sliding down to close the now playing screen.

  Happy new year!

• "Windows cannot access the specified device, path or file" for each X 86 application on a Windows 2003 x 64 server

  Hello

  I have a Windows 2003 X 64 server and since a week ago everything works fine.

  For a week or two when I try to run an X 86 application, I always get this error:
  "Windows cannot access the specified device, path or file.
  If I run a x 64 apps everything works fine.
  What made a mistake?
  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cannot access the audio settings

  Hey everybody. Today I plugged my headphones in and waited for chip connect disable audio clear more because it's hurting my ears with headphones... He didn't do it, I tried to turn off manually but I couldn't access the audio settings in the music app... He just wouldn't do anything when I clicked it, then he said this: https://www.dropbox.com/s/c7drv4nf6o0pydg/Screenshot_2015-09-22-13-34-25.png?dl=0 and when I go to settings, audio, audio settings, it still says the same thing... I need help, I restarted my phone like 5 times to no avail... And I checked the running applications, and there is nothing that would make this...

  Thanks in advance

  Hello raul, it seems that you have downloaded an app enchancing equalizer or sound that prevents you from using the audio settings by default. Please check the app and delete it and try again.

• error message "Windows cannot access the specified device, file, or the path."

  Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

  Hi nanditaberi,

  Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may be caused by this security software on the computer, uninstall them might solve the problem.

  Example: AVG, Zone Alarm

  Important:

  O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

  Ø you may need to check with the manufacturer of security software for reinstallation and activation.

  O re - install the security software on the computer.

  Reference:

  Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

  A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• Cannot access the API blocked

  I created a web application bb factory using the web works for Visual Studio plugin. I tried to install the application and got the error cannot access the api blocked. I researched and found that the fact of not having signed app can cause this error. I followed the instructions that comes with the plugin on the signing of the app.

  • In Microsoft® Visual Studio®, on the Tools menu, click on install BlackBerry signing key.
  • Navigate to the folder that contains the file signing key (.csi).
  • Click OK.
  • Type the PIN registration and the password for the private key.
  • Click Save.
  • When the success dialog box appears, click on exit.

  When I try to install the application, I get the same error message. Do not install the key and sign the application correctly? Help, please

  Have you installed all the three keys?

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.