cannot access the Setup/bios menu

Similar Questions

• Cannot access the Setup of the BIOS on my Satellite C660-24F

  I can't access my computer laptop Bios Setup - when I pres F2, F11 or F12

  * Satellite C660-24F PSC1NE *.

  He only statup Windows can't access the BIOS boot menu. I looked BIOS updat for my Satalite C660-24F - PSC1NE model - and I have not found on this web site.

  Can someone help me please?

  Have you changed the settings in BIOS?
  You may have turned on option quick start?

  Please do not forget that do you close regular. Also test F8 option.

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• Since the upgrade to you Bird 45.5.1am cannot access the calendar. Don't have re-installed lightning but no tabs or menu items added. Have restarted you bird & PC reboot.

  Since the last update to Thunderbird 45.5.1 cannot access the calendar (where I hope to recover all my appointment with the doctor for 2017). Have reinstalled Lightning (then restarted you bird, & also tried a reboot of the PC) and although if I have Add-ons Manager access it allows me to disable or remove 4.7.4 Lightning there is no way to access the calendar - there are no tabs, menus or extra sidebars. Also tried different keyboard shortcuts, F11, ctrl-shift-C that does not receive me in two. Any help would be appreciated / thank you

  Resolved in the clear light of day and with my newly saved profile, I used the delete option in the Add-ons Manager to uninstall the lightning. After the reboot of you bird I have re-ran then install Lightning of the Add-ons Manager. That worked and found my old calendar events as well - if all is good now.

  Hope this info helps someone else who has the same problem.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.

  I get the first screen where you have the choice to configure windows or press 'r' for recovery console.

  After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it.  Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on.  If I choose "C:" he then told me that there is already a system opperating on the partition...

  Hello

  Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
  ' http://support.microsoft.com/kb/316425 '.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• message error "windows cannot access the specified device path or file.

  After updating all upgrades of Windows and restarting my computer, I get the error message "windows cannot access the specified device path or file" on all my programs. I tried to go to the 'system restore', but it won't let me access that is. I am running Windows XP on a Dell Vostro 400

  Tried to start the restoration of the system from the Windows Advanced Options menu and he tried to restore from the last successful boot - unfortunately the last successful upward included the problem start

  Restarted in safe mode and not run Chkdsk/r - no found error - problem persists.

  Finally found my Dell operating system disk and went into the Boot Menu at startup screen and set it to Boot from the Dell operating system CD

  After the CD started, I went to reinstall Windows, and he gave me an option for repair

  The relocation process took about 30 minutes to complete, but he reinstalled all missing or damaged files that were the cause of the problem

  Fixed a problem!

  Thanks Mike - You're on the right track!

• Cannot access the windows service install

  Initial Setup error title: windows
  I'm unable to download the latest version of java as well as the updates of windows and the reason given was that "cannot access the windows service install" Pls advise

  Hello

  What happens when you try to perform windows updates?

  Check the status of the Windows Installer service and make sure that it is started

  Method 1:
  Start the Windows Installer service
  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Unregister and register the Windows Setup program again
  Method 2:

  Unsubscribe and re - register the Windows Installer to do this follow the steps below.

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.

  Method 3:
  You can follow the steps in knowledge base article and check:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• When Installing Blackberry software error message Windows cannot access the specified device, path or file

  Try to install the software for my Blackberry on laptop, get the message Windows cannot access the specified device, file, or path may not be the appropriate permissions for access you element. What should I do please help...

  Re-download/save to your desktop > right click on its Setup.exeo run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 error: "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  Hi I encounter an error message "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  The error message every time I click on administrative tools of the window (including the Control Panel, windows update, the Windows Explorer, etc.) but without impact on other programs I have.

  I rebooted in safe mode and discover that everything works fine (no error message will appear when you click on window management tools).

  I proceed to do a clean boot-> first disable all services of third parties (message yet to come), and then clear the components of the service windows (message yet to come)

  I tried to type "explorer.exe" in the start menu-> search field then click right highlight to run with administrative rights, then received another message of error "Server execution failed".

  I am the administrator account on this PC - and have full access.

  The error seems to have appeared on 11 August after Windows Update the following:

  Update of security for Microsoft Windows (KB2536276, 2556532 2559049, 2560656, 2563894, 2567680), and

  Update for Microsoft Windows KB2563227

  A security update for the Microsoft.net framework 4 client profile (verson 1)

  There is no installation of any software or updates outside the windows update.

  I also tried to restore the windows before August 10, 2011, but that did nothing.

  As the error prevents me to access any object Admin window - I'm unable to retrieve the product ID and write to Microsoft Tech and ask for help.

  I hope some of you can offer the suggestion of possible solutions (I really want to re - install window 7 and other software, I'm sure).

  Thank you.

  My solution works in about 2 minutes, it's a very weird error and only happened to 3 jobs in the last 3 years, this solution does not need to create another account if local administrator is active and allows access to the corrupt user documents ect.

  Log in as the local administrator or a domain administrator

  If the local administrator is not activated refer to http://support.microsoft.com/kb/555910 and after completing these newspapers of steps on the local administrator account.

  Locate the user for example files. C:\Users\[username]\

  If you see no AppData press Alt to see the toolbar at the top of the window, select Tools > folder options, go to the view tab and select "Show hidden files, folders and drives" click OK.

  Go to AppData\Local

  Select all (Ctrl + a).

  Delete

  * Do not delete credentials (as it will remove their wallpaper) *.

  This allows to release the error.

• Cannot access the API blocked

  I created a web application bb factory using the web works for Visual Studio plugin. I tried to install the application and got the error cannot access the api blocked. I researched and found that the fact of not having signed app can cause this error. I followed the instructions that comes with the plugin on the signing of the app.

  • In Microsoft® Visual Studio®, on the Tools menu, click on install BlackBerry signing key.
  • Navigate to the folder that contains the file signing key (.csi).
  • Click OK.
  • Type the PIN registration and the password for the private key.
  • Click Save.
  • When the success dialog box appears, click on exit.

  When I try to install the application, I get the same error message. Do not install the key and sign the application correctly? Help, please

  Have you installed all the three keys?

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Problem with Windows Search 'Windows cannot access the specified device, file, or path. May not be the appropriate permissions for access you to computing.

  I have a very annoying problem:

  
  OT: Problem with Windows Search
  When I try to use Windows Search in the menu start I get the message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. I get this message no matter what I type in. Therefore, I can't find something on my computer and continually to achieve this result.
  Could someone please help me solve this problem?
  I tried what answers I could find other peoples messages online, nothing helps. I'd appreciate any help.
  Thank you very much.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244