Cannot access the weblogic Server console.

Similar Questions

• access to the weblogic Server console problem

  Hi all

  We have a problem of access to the weblogic Server console page.

  We have fresh installed the Enterprise Manager Cloud control 12 c and we can access the MS pages without problems.

  When trying to connect to the weblogic Server (https:// < our_server >: 7101/console) with Firefox, IE11 or if the page is loading and loading without showing the login page.

  But when trying to connect to this address with a place (elinks) browser on the unix machine we'll see the first page immediately.

  Any ideas?

  Thank you

  Michael

  Hi all

  We solved the problem in another way: we opened the ports http access.

  Because issues were security settings in Internet Explorer.

  Thank you

  Michael

• Cannot access the Web server in the DMZ from the inside using IP global

  Hi all

  I hope it's a very simple question.

  I'm running a PIX 515 firewall v6.3. I set up a Web server in my DMZ and use static NAT for re-branded it overall static IP address. Access from the outside of the demilitarized zone works remarkably well. I can access inside the interface Web site using the internal IP, but I can't access it from inside interface using the global IP are entrusted to him.

  Is there a particular reason why this would not be allowed? My feeling was that the request would be forwarded via the external interface (as it is a global IP address) and then be bounced back by my sense of the ISP the request would come to the new external interface (as the static NAT is applied to the external interface).

  However if I try and access the global IP from my inside interface, then the browser can not find the server.

  can someone explain why this is so? Any information would be appreciated.

  see you soon,

  Wayne

  ---------------------------------

  6.3 (3) version PIX

  interface ethernet0 100full

  interface ethernet1 100full

  interface ethernet2 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif dmz security50 ethernet2

  hostname helmsdeep

  domain p2h.com.sg

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  no correction protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  No fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  acl_out list access permit tcp any host 203.169.113.110 eq www

  access-list 90 allow the host tcp 10.1.1.27 all

  pager lines 24

  debug logging in buffered memory

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 dmz

  IP address outside pppoe setroute

  IP address inside 192.168.1.1 255.255.255.0

  dmz 10.1.1.1 IP address 255.255.255.0

  no failover

  failover timeout 0:00:00

  failover poll 15

  No IP failover outdoors

  No IP failover inside

  no failover ip address dmz

  location of PDM 202.164.169.42 255.255.255.255 inside

  location of PDM 202.164.169.42 255.255.255.255 dmz

  location of PDM 10.1.1.26 255.255.255.255 dmz

  location of PDM 10.1.1.26 255.255.255.255 outside

  location of PDM 172.16.16.20 255.255.255.255 outside

  location of PDM 192.168.1.222 255.255.255.255 inside

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  Global (dmz) 1 10.1.1.101 - 10.1.1.125

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  NAT (dmz) 0-list of access 90

  NAT (dmz) 1 0.0.0.0 0.0.0.0 0 0

  static (dmz, external) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

  Access-group acl_out in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.222 255.255.255.255 inside

  enable floodguard

  string fragment 1

  Console timeout 0

  Terminal width 80

  Code v6 pix or less don't let you have traffic "back" or return flow via the same interface on which it was sent. Having also your bounce back off of an external server traffic is never a good idea, because you won't be able to distinguish which and rogue attacks by spoofing someone outside your network.

  Since you are using pix 6.3 code, you may be able to outside the NAT. Add this static to your config:

  static (dmz, upside down) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

  You may need to run a clear xlate after adding the new static statement. Note that the interfaces: it's demilitarized zone, inside inside, dmz.

  I would like to know if it works.

• Install PT8.53 Linux question: startPIA.sh cannot run the WebLogic Server

  
  People,

  Hello. I install PeopleTools 8.53 with the server database Oracle 11 GR 1 material and OS Oracle Linux 5. Data Mover Bootstrap and application designer can connect to the instance of database successfully. About PIA, Oracle Database Server and Application Server Tuxedo11gR1 runs correctly. But when to start WebLogic Server in the opt/PT8.53/webserv/PT853/bin directory, I get an error message like below:

  [user@userlinux bin] $./startPIA.sh

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  According to the site Internet of Nicolas http://gasparotto.blogspot.com/2010/02/web-server-weblogic-11gR1.html, I did 2 things like below:

  
  First of all, in the setenv.sh file, I changed MAX_FILE_DESCRIPTORS to 4096 to 1024.

  
  Secondly, I added the last 4 lines in the /etc/security/limits.conf file as below:

  # - nice - max great priority has led to increase of
  priority realtime max # - rtprio -
  #
  # < domain > < type > < item > < value >
  #

  soft #* coeur 0
  #* rss hard 10000
  #@student hard nproc 20
  #@faculty soft nproc 20
  #@faculty hard nproc 50
  #ftp hard nproc 0
  #@student - maxlogins 4

  # The following lines are added by me

  WebLogic - nofile 65536
  WebLogic - nproc 65536
  WebLogic - unlimited core
  WebLogic - memlock 50000000

  # End of file

  
  I have restart startPIA.sh and get the same error message:

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  
  My question is: any folk cannot resolve the error above to start the WebLogic for PIA Server?

  Thank you.

  As Nicolas says that you cannot start PIA on ports below 1024 on Linux with a non-root users.

  Recreate your PIA assembly and affect others like 8000 and 4443.

• Cannot access the Oblivion cheat console, but I stopped the windows media center Receiver service.

  Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I should try next. ?

  Hi daking9002,

  To bring up the cheat console into oblivion, you will need to unplug the sensor remotely from the PC. Once it has been disconnected, the oblivion cheat console will come just as it would on any other PC.

  I also tried equipping my number 1 access key. It works very well now, I just press 1 and the console opens. To close simply press ESC twice and press 1 once the UN-equip the ring.

  You can also download: " http://www.tesnexus.com/downloads/file.php?id=13133 ."

  -It gives you an inventory item: "Ring of Console" problem solved. -

  QUESTMSG

• Cannot access the VPN server located behind the corporate firewall.

  The VPN server was created by myself, in my Department. I can access the server from anywhere when I am in my business network. When I'm at home, I can't even ping the VPN server WAN interface. When I try to connect via the cisco VPN client, I get the message ' reason 412: peer remote not responding. "

  The main my company firewall blocks external traffic?

  Should I change anything in the VPN server?

  I heard about port forwarding, but have no knowledge about this. Port forwarding is done on the VPN server or the main firewall?

  Also should I go and ask the company system administrator to enable certain ports for the public IP address that I use for my server?

  I hope you can help

  Concerning

  Yes, quite correct. Please open ESP protocol UDP/500 and UDP/4500 for IPSec VPN.

• E4200 V2 - cannot access the FTP server build - in Internet

  Hello.

  I just bought a new E4200V2.

  I have a static IP and I would like to make the built-in FTP server accessible from the Internet.

  The server is accessible behind the router, but not from outside. I guess it's the firewall blocks the traffic, but I have not found any detailed firewall configurations.

  Thank you.

  Solved! It wasn't a real problem. The FTP server is accessible by its static IP, but only from the outside of the network. It could be consulted on the inside by its local IP address. Quite strange...

• Cannot access the System Recovery Console invalid password

  System Recovery Console insists that I use a "invalid password". I installed Win7. I make a written record of all used passwords so I'm sure I know the password I put in the first place; It is a simple word, that I always use for low security situations.  However, I tried all variants of logics of this password (upper and lower case, etc.), but nothing works.  I loaded 'ophcrack LiveCD' and found that the password is .  I tried to use no password and this also fails.

  What can I do to pass in addition to "invalid password" so I can't enter the System Recovery Console?

  Thank you.

  Hey Ron,.

  I finally got some time to focus on this and learned something that could explain the difficulties you encounter!

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  It seems that the Recovery Console has been taken from Windows Vista (and 7). Personally I did not know this, but then again I don't use it every day! :) So in short, it is not designed to work with Windows 7, and this issue is the result of this.

  Sorry it took me so long to find! I hope that answers your question!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• "Windows cannot access the specified device, path or file" for each X 86 application on a Windows 2003 x 64 server

  Hello

  I have a Windows 2003 X 64 server and since a week ago everything works fine.

  For a week or two when I try to run an X 86 application, I always get this error:
  "Windows cannot access the specified device, path or file.
  If I run a x 64 apps everything works fine.
  What made a mistake?
  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Email connection problems: cannot access the requested url due to the system on that server error

  How can I get my email on when I get the above message

  Cannot access the url reqested due tosystem error on this server

  Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?

• BI SampleAppFiles Server cannot access the correct file

  Hello experts,

  Part of my project is creation of KPIs for my clients. Before doing all this, I'm trying to create a KPI sample and see if it works well.   It is using 11g (1.1.7).

  Here's the problem: I created the sample KPI without problem; However, when I try to open the report I get an error that

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 64023] Cannot access the E:\BIHOME\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1/sample/SampleAppFiles/Data/SAMP_REVENUE_A.xml: no such file or directory for table SAMP_REVENUE_A (HY000)

  The path is correct, except instead (E:\), it should be (C:\).  Does anyone know how to change this? Help, please.

  I don't have a 'E' drive in my system. This forum works on windows

  Help, please

  Hello

  In the sample OBIEE, you have a variable called BI_EE_HOME with this path

  To change this, open your SPR (online mode) and then change repository variable BI_EE_HOME

  

  We call this variable in your connection pool (you can change this path directly on the connection pool too)

  Felipe Idalgo