E4200 V2 - cannot access the FTP server build - in Internet
Hello.
I just bought a new E4200V2.
I have a static IP and I would like to make the built-in FTP server accessible from the Internet.
The server is accessible behind the router, but not from outside. I guess it's the firewall blocks the traffic, but I have not found any detailed firewall configurations.
Thank you.
Solved! It wasn't a real problem. The FTP server is accessible by its static IP, but only from the outside of the network. It could be consulted on the inside by its local IP address. Quite strange...
Tags: Linksys Routers
Similar Questions
-
Cannot access the Web server in the DMZ from the inside using IP global
Hi all
I hope it's a very simple question.
I'm running a PIX 515 firewall v6.3. I set up a Web server in my DMZ and use static NAT for re-branded it overall static IP address. Access from the outside of the demilitarized zone works remarkably well. I can access inside the interface Web site using the internal IP, but I can't access it from inside interface using the global IP are entrusted to him.
Is there a particular reason why this would not be allowed? My feeling was that the request would be forwarded via the external interface (as it is a global IP address) and then be bounced back by my sense of the ISP the request would come to the new external interface (as the static NAT is applied to the external interface).
However if I try and access the global IP from my inside interface, then the browser can not find the server.
can someone explain why this is so? Any information would be appreciated.
see you soon,
Wayne
---------------------------------
6.3 (3) version PIX
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif dmz security50 ethernet2
hostname helmsdeep
domain p2h.com.sg
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
no correction protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
No fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
acl_out list access permit tcp any host 203.169.113.110 eq www
access-list 90 allow the host tcp 10.1.1.27 all
pager lines 24
debug logging in buffered memory
Outside 1500 MTU
Within 1500 MTU
MTU 1500 dmz
IP address outside pppoe setroute
IP address inside 192.168.1.1 255.255.255.0
dmz 10.1.1.1 IP address 255.255.255.0
no failover
failover timeout 0:00:00
failover poll 15
No IP failover outdoors
No IP failover inside
no failover ip address dmz
location of PDM 202.164.169.42 255.255.255.255 inside
location of PDM 202.164.169.42 255.255.255.255 dmz
location of PDM 10.1.1.26 255.255.255.255 dmz
location of PDM 10.1.1.26 255.255.255.255 outside
location of PDM 172.16.16.20 255.255.255.255 outside
location of PDM 192.168.1.222 255.255.255.255 inside
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
Global (dmz) 1 10.1.1.101 - 10.1.1.125
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
NAT (dmz) 0-list of access 90
NAT (dmz) 1 0.0.0.0 0.0.0.0 0 0
static (dmz, external) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0
Access-group acl_out in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.222 255.255.255.255 inside
enable floodguard
string fragment 1
Console timeout 0
Terminal width 80
Code v6 pix or less don't let you have traffic "back" or return flow via the same interface on which it was sent. Having also your bounce back off of an external server traffic is never a good idea, because you won't be able to distinguish which and rogue attacks by spoofing someone outside your network.
Since you are using pix 6.3 code, you may be able to outside the NAT. Add this static to your config:
static (dmz, upside down) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0
You may need to run a clear xlate after adding the new static statement. Note that the interfaces: it's demilitarized zone, inside inside, dmz.
I would like to know if it works.
-
Cannot access the weblogic Server console.
Hello
In my windows server 2012 I created the virtual machine using the Hyper-V Manager.
In this virtual machine, I installed the weblogic Server 10.3.6. The ip address of the virtual machine is 192.168.1.9.
In my virtual machine using localhost I can able to access the console. But when I try to access the console to another computer that has windows 7, cannot able to access the console.
Check if the AdminServer is listening on all addresses to link or not?
Can you try to set an IP address to your AdminServer as following in your "$DOMAIN_HOME/config/config.xml", and then try again
AdminServer false 7001 true 192.168.1.9 Still, if you face any problem, then it might be a firewall problem.
Please, try the following on the remote computer to see if the port is accessible from the other box or not:
From your windows 7 computer customer trying to see if this port is available or not on this IP address
telnet 192.168.1.9 7001
Also several times the IPv6 configuration can cause this problem, where can you try to start your WebLogic using the following JVM option:
-Djava.net.preferIPv4Stack=true
-
Cannot access the VPN server located behind the corporate firewall.
The VPN server was created by myself, in my Department. I can access the server from anywhere when I am in my business network. When I'm at home, I can't even ping the VPN server WAN interface. When I try to connect via the cisco VPN client, I get the message ' reason 412: peer remote not responding. "
The main my company firewall blocks external traffic?
Should I change anything in the VPN server?
I heard about port forwarding, but have no knowledge about this. Port forwarding is done on the VPN server or the main firewall?
Also should I go and ask the company system administrator to enable certain ports for the public IP address that I use for my server?
I hope you can help
Concerning
Yes, quite correct. Please open ESP protocol UDP/500 and UDP/4500 for IPSec VPN.
-
Cannot access the applications due to no internet connection
Original title: Windows8 connection
Hello! I recently bought a brand new computer that came with installed windows8. I am unable to connect to internet through windows8. I can connect using Internet explore and firefox by using the Office on the same computer. I would like to be able to use the applications on this computer, but with windows8 saying its not connected I can't do. Can anyone help me to get windows 8 running again? I can tell you that when I started using this computer it worked until I downloaded a bot on the computer that my husband uses for his game online that only works on IE on this computer. I guess that when I downloaded the bot something happened but I don't know how to solve this problem, if it can be fixed. At this point, I can't remove the bot as he needs for his game. I hope someone can help! Thanks in advance for anyone who might able and willing to help me with this!
Hi S.Pearson,
It seems that you are able to connect to the internet using the browser desktop but not able to connect to the internet to use your applications.
This problem can occur because the proxy setting or if any application of party third conflict.
Please help me with the following information related to this issue:
- What is the brand and model of your computer?
- Have you installed a third-party security software on your computer?
- You receive an error message when you try to use the apps?
Please follow the steps mentioned below:
Method 1: If the proxy is enabled, you will not be able to use the metro apps. I suggest you to check the proxy settings and if the proxy is enabled, go ahead and disable it. Refer to the steps:
Turn off the proxy connection:
Follow the steps to turn off the proxy connection.
a. click on the gear box in the upper right corner in Internet Explorer.
b. click on Tools and then click Internet Options.
c. click on the connections tab, and then click LAN settings.
d. uncheck the use a proxy server for your LAN check box.
e. click on OK.
Method 2: Temporarily disable third-party security program.
If you have installed a third-party security program, I suggest you contact the technical support of the safety program and temporarily disable the software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
Please answer us on the State of the question to help you further
-
PIX 501 to allow access to the ftp server
Hello
We have a public ip address of the pix 501 and the other, I want to access the ftp server on the internal network from the outside. I tried to configure the PDM by a static nat, which translate to the address of the FTP to the public address, but then none of the stations networks could out - how can I configure it?
I would also like to know what ports should I open on the acl for access to the ftp server.
Thank you, daguech
Yes, sorry... You must use the unique host for addresses command. The access list is applied to your external interface?
for example, the command would be:
Access-group acl_out in interface outside
Also, can you connect to the local ftp server behind a firewall?
-
Cal issue when you run the FTP server
My organization has recently purchased Enterprise Cloud Suite (ECS) and as such in Core Cal went (included in the ECS).
I have a section that needs to be 'entrepreneurs' access a FTP server that will be used to upload and download files only. No application will run.
How are they managing Cal licenses? Contract users need client access licenses to access the FTP server?
It was suggested that all I could need is to have a Windows external connector... ??
Is there a better way to store and transfer these files? Azure storage?
Hello
Please post your question here:
https://social.technet.Microsoft.com/forums/en-us/home?searchTerm=default%20Ftp%20server
-
Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.
I cannot access all features and can be closed only by using force quit.
Please stop calendar and also the application of reminders, runs. Force quit if necessary.
Back up all data.
If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.
If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.
Launch schedule and see if there is an improvement.
-
Hello
I have a Windows 2003 X 64 server and since a week ago everything works fine.For a week or two when I try to run an X 86 application, I always get this error:"Windows cannot access the specified device, path or file.If I run a x 64 apps everything works fine.What made a mistake?Thank youHello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
How can I get my email on when I get the above message
Cannot access the url reqested due tosystem error on this server
Apparently, there is a problem on the mail server. Contact technical support for your email provider. MS - MVP - Elephant Boy computers - don't panic!
-
I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?
Hello
Work on a domain environment?
Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.
If you are on a domain environment then please post the question on the link mentioned below using:
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads -
Cannot access the server message coming up and cannot convert files
Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.
ER
Is it ExportPDF?
-
BI SampleAppFiles Server cannot access the correct file
Hello experts,
Part of my project is creation of KPIs for my clients. Before doing all this, I'm trying to create a KPI sample and see if it works well. It is using 11g (1.1.7).
Here's the problem: I created the sample KPI without problem; However, when I try to open the report I get an error that
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 64023] Cannot access the E:\BIHOME\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1/sample/SampleAppFiles/Data/SAMP_REVENUE_A.xml: no such file or directory for table SAMP_REVENUE_A (HY000)
The path is correct, except instead (E:\), it should be (C:\). Does anyone know how to change this? Help, please.
I don't have a 'E' drive in my system. This forum works on windows
Help, please
Hello
In the sample OBIEE, you have a variable called BI_EE_HOME with this path
To change this, open your SPR (online mode) and then change repository variable BI_EE_HOME
We call this variable in your connection pool (you can change this path directly on the connection pool too)
Felipe Idalgo
-
CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION
Hello
I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match? Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.
Please see my full configuration:
Router #sh run
Building configuration...Current configuration: 8150 bytes
!
! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Passwords security min-length 6
no set record in buffered memory
enable secret 5 xxxxxxxxxxx
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
IP source-route
no ip free-arps
IP cef
!
Xxxxxxxxx name server IP
IP server name yyyyyyyyy
!
Authenticated MultiLink bundle-name Panel
!parameter-map local urlfpolicy TSQ-URL-FILTER type
offshore alert
block-page message "Blocked according to policy"
parameter-card type urlf-glob FACEBOOK
model facebook.com
model *. Facebook.comparameter-card type urlf-glob YOUTUBE
mires of youtube.com
model *. YouTube.comparameter-card type urlf-glob CRICKET
model espncricinfo.com
model *. espncricinfo.comparameter-card type urlf-glob CRICKET1
webcric.com model
model *. webcric.comparameter-card type urlf-glob YAHOO
model *. Yahoo.com
model yapoparameter-card type urlf-glob PERMITTEDSITES
model *.parameter-card type urlf-glob HOTMAIL
model hotmail.com
model *. Hotmail.comCrypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-2049533683
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2049533683
revocation checking no
rsakeypair TP-self-signed-2049533683
!
Crypto pki trustpoint tti
crl revocation checking
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
name of the object [email protected] / * /
crl revocation checking
!
!
TP-self-signed-4966226213 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332quit smoking
encryption pki certificate chain tti
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO1905/K9 sn xxxxxx
licence start-up module c1900 technology-package datak9
username privilege 15 password 0 xxxxx xxxxxxx
!
redundancy
!
!
!
!
!
type of class-card inspect entire tsq-inspection-traffic game
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
match Protocol l2tp
class-card type match - all BLOCKEDSITES urlfilter
Server-domain urlf-glob FACEBOOK game
Server-domain urlf-glob YOUTUBE game
CRICKET urlf-glob-domain of the server match
game server-domain urlf-glob CRICKET1
game server-domain urlf-glob HOTMAIL
class-map type urlfilter match - all PERMITTEDSITES
Server-domain urlf-glob PERMITTEDSITES match
inspect the class-map match tsq-insp-traffic type
corresponds to the class-map tsq-inspection-traffic
type of class-card inspect correspondence tsq-http
http protocol game
type of class-card inspect all match tsq-icmp
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence tsq-invalid-src
game group-access 100
type of class-card inspect correspondence tsq-icmp-access
corresponds to the class-map tsq-icmp
!
!
type of policy-card inspect urlfilter TSQBLOCKEDSITES
class type urlfilter BLOCKEDSITES
Journal
reset
class type urlfilter PERMITTEDSITES
allow
Journal
type of policy-card inspect SELF - AUX-OUT-policy
class type inspect tsq-icmp-access
inspect
class class by default
Pass
policy-card type check IN and OUT - POLICIES
class type inspect tsq-invalid-src
Drop newspaper
class type inspect tsq-http
inspect
service-policy urlfilter TSQBLOCKEDSITES
class type inspect tsq-insp-traffic
inspect
class class by default
drop
policy-card type check OUT IN-POLICY
class class by default
drop
!
area inside security
security of the OUTSIDE area
source of security OUT-OF-IN zone-pair outside the destination inside
type of service-strategy check OUT IN-POLICY
zone-pair IN-to-OUT DOMESTIC destination outside source security
type of service-strategy inspect IN and OUT - POLICIES
security of the FREE-to-OUT source destination free outdoors pair box
type of service-strategy inspect SELF - AUX-OUT-policy
!
Crypto ctcp port 10000
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 2
Group 2
!
ISAKMP crypto client configuration group vpntunnel
XXXXXXX key
pool SDM_POOL_1
include-local-lan
10 Max-users
ISAKMP crypto ciscocp-ike-profile-1 profile
vpntunnel group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-TRANSFORMATION TSQ
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
!
interface GigabitEthernet0/0
Description LAN INTERFACE-FW-INSIDE
IP 172.17.0.71 255.255.0.0
IP nat inside
IP virtual-reassembly in
security of the inside members area
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Description WAN-INTERNET-INTERNET-FW-OUTSIDE
IP address xxxxxx yyyyyyy
NAT outside IP
IP virtual-reassembly in
security of the OUTSIDE member area
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
no fair queue
2000000 clock frequency
!
type of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP nat inside source list 1 interface GigabitEthernet0/1 overload
IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
IP route 192.168.1.0 255.255.255.0 172.17.0.6
IP route 192.168.4.0 255.255.255.0 172.17.0.6
!
access-list 1 permit 172.17.0.0 0.0.255.255
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip yyyyyy yyyyyy everything
!
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport input ssh rlogin
!
Scheduler allocate 20000 1000
endA few things to change:
(1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.
(2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:
access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255
access-list 120 allow ip 172.17.0.0 0.0.255.255 everything
overload of IP nat inside source list 120 interface GigabitEthernet0/1
No inside source list 1 interface GigabitEthernet0/1 ip nat overload
(3) OUT POLICY need to include VPN traffic:
access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255
type of class-card inspect correspondence vpn-access
game group-access 121
policy-card type check OUT IN-POLICY
vpn-access class
inspect
-
Configure the FTP server using the command line
After IIS FTP server on Vista (or XP) starts the "default FTP Site" has only "read permissions".
How can I set the FTP server to the CONTROL LINE HELP, to allow 'write' also.I believe that access is denied is possible if,
the law is already assigned has.)
you do not have administrator rights (b.)Anyway, you can avoid the prompt (Y/N) by the presence of echo on the batch file
echo y | Cacls filename /g username :permissionRefer to Microsoft KB on How to Use CACLS.EXE in a Batch File .
-----------------------------------------------------
Remember to Vote as helpful for others and accept the the proposed Answer if it is relevant to build KB in this Forum.
Maybe you are looking for
-
Tecra S5 - install second operating system using virtualization
Hi guys,.can you help me with installing OpenSuse 11 on my Tecra S5 T7700. I put virtualization in the Bios already, but I have no idea what I should do next. Thanks for help.Michal
-
I set up my HP to store faxes received on a folder on my PC. How can I configure this machine DO NOT print all incoming faxes at reception.i am on win-7/32 bit Thank you
-
HP 15-f009ca: can not find the drivers for my PC after downgrading to Windows 7
Hello world!A few weeks ago, I bought a Hp laptop of type 15-f009ca. Because I didn't like windows 8, I downgraded to Windows 7. The installation was successful, but I could not find the driver for my PC wireless LAN.Anyone know where I can download
-
I use win vista 32 bit, and for awhile, it can not be updated, just take time and nothing, why this happen and how do I fix this?
-
How can I buy excel?