Cannot access to roles and features (Server Manager)

Similar Questions

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• Why my VPN clients cannot access network drives and resources?

  I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!

  : Saved

  :

  ASA Version 8.2 (5)

  !

  ciscoasa hostname

  Cisco domain name

  activate the password xxxxxxxxxxxxx

  passwd xxxxxxxxxxxxxxxxx

  names of

  name 68.191.xxx.xxx outdoors

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.201.200 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address outside 255.255.255.0

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.201.1 server name

  Cisco domain name

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group network obj - 192.168.201.0

  FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0

  NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0

  FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any

  Extended access list-NAT-FREE enabled a whole icmp

  allow any scope to an entire ip access list

  allow any scope to the object-group TCPUDP an entire access list

  allow any scope to an entire icmp access list

  inside_access_in of access allowed any ip an extended list

  inside_access_in list extended access allow TCPUDP of object-group a

  inside_access_in list extended access permit icmp any one

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access allow TCPUDP of object-group a

  outside_access_in list extended access permit icmp any one

  Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0

  access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0

  inside_nat0_outbound list extended access permit icmp any one

  inside_nat0_outbound_1 of access allowed any ip an extended list

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global 1 interface (outside)

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 192.168.201.0 255.255.255.0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1

  Route inside 0.0.0.0 255.255.255.255 outdoor 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.201.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ciscoasa

  Keypairs xxx

  Proxy-loc-transmitter

  Configure CRL

  XXXXXXXXXXXXXXXXXXXXXXXX

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP allow inside

  crypto ISAKMP policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  allow inside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

  Cisco by default field value

  attributes of Group Policy DfltGrpPolicy

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  WebVPN

  SVC request enable

  internal KunduVPN group strategy

  attributes of Group Policy KunduVPN

  WINS server no

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Cisco by default field value

  username xxxx

  username xxxxx

  VPN-group-policy DfltGrpPolicy

  attributes global-tunnel-group DefaultRAGroup

  address VPNIP pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  type tunnel-group KunduVPN remote access

  attributes global-tunnel-group KunduVPN

  address (inside) VPNIP pool

  address pool KunduVPN

  authentication-server-group (inside) LOCAL

  Group Policy - by default-KunduVPN

  tunnel-group KunduVPN webvpn-attributes

  enable KunduVPN group-alias

  allow group-url https://68.191.xxx.xxx/KunduVPN

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc

  : end

  don't allow no asdm history

  Hello

  What is the IP address of the hosts/servers LAN Gateway?

  If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.

  For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.

  • Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
  • Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
  • Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
  • Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
  • Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP

  So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)

  I would like to know if the installation is as described above.

  -Jouni

• cannot access the icons and files in windows xp

  I write on behalf of the client. Customer is unable to access his files in his computer based on Windows XP and icons.

  Hello

  • Did you change your computer before this problem?
  • You receive an error message during the access, the icons and files?

  This problem occurs when one or more of the following conditions are met:

  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  You can view these methods:

  Method 1:

  Let us check in SafeMode if the problem persists.

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

   

  Method 2:

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• Cannot access osha.gov and get message as not to go on the web site

  Original title: I can't go to site web osha.gov.

  Whenever I'm trying to go to the website of osha.gov the the screen comes to expiration and said he can't go to the web site.

  All I can do to stop this and log on to this site?

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot access osha.gov website and get the message that can not go to the web site.

   

  1. what browser do you use?

  2 did you do changes on the computer before the show?

  3 - is the full error message?

  4. the question limited to only this site or does it occur with all sites?

   

  If you use Internet Explorer, then changes to your Internet Explorer options might be preventing you to view certain websites. To check, I suggest you to refer to the procedure described in the site:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897#gM1

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Cannot access the laptop and Skype settings

  Original title: cannot start laptop settings and other applications

  Good evening

  I have some problems with Windows 8. I used to have a problem with what appeared to be shortcuts that arises simply any key I pressed on the keyboard, so a friend of mine helped me by changing a few things on PC settings (do not know what she did do). Given that (not sure if precisely from that day) that I can not open the PC settings, or even Skype... help please?

  Thank you

  Hello

  This problem may occur because of file system corruption.

  Please help me with the following information related to this issue:

  1. What is the brand and model of your computer?
  2. You receive an error message when you try to access the settings of the PC?
  3. When you say no access to Skype, are you referring to the modern version of Skype or the desktop version of Skype?
  4. You are able to access other applications apart from Skype?
  5. You receive an error when you try to access Skype?

  Check if you are able to access the laptop settings by following the steps mentioned below:

  • Press Windows Key + C.
  • Click on Search.
  • Type laptop settings.
  • Click PC settings and check if you are able to access.

  Please follow the steps mentioned below:

  Method 1: I suggest you to run the Design Checker (SFC Scan) system files because this can be a problem with the corrupted system files.

  System File Checker is a Microsoft Windows utility that allows Windows users to find and restore corruptions in system files

  Monitoring of file system (CFS) and then check if it solves the problem.

  Follow these steps:

  1. Press Windows Key + X.
  2. Click prompt (Admin).
  3. At the command prompt, type sfc/scannow and press enter.

  See also: http://support.microsoft.com/kb/929833

  Method 2;

  You can check the issue on another user account. If you already have a different account created on your computer, please check the question about it, try to create a new user account and control.

  You can check the link for create another user account:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please answer us on the State of the question as well as the information required to help you further.

• Cannot start area Planner and the server process in the machine virtual App/lot

  Hello
  
  After the change of /etc/tnsnames.ora in the machine virtual App/Batch:
  
  [Psadm2@psovmab LOG] $ /etc/tnsnames.ora more
  H91TMPLT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.133) (PORT = 1521)))
  (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = H91TMPLT.corp.peoplesoft.com))
  )
  
  I can't start Task Scheduler field and the server process:
  
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 197 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 198 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)

  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 793 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec BBL - one:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 773 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 495 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  Try to start...

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 801 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSWATCHSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSWATCHSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSQRYSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSQRYSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSAMSRV o ./LOGS/stdout e ./LOGS/stderr - A - APPDOM d s PSSAMSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKHND o EI ./LOGS/stderr s PSBRKHND_dflt:BrkProcess - APPDOM d s PSBRKHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKDSP o EI ./LOGS/stderr s PSBRKDSP_dflt:Dispatch - APPDOM d s PSBRKDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBHND o EI ./LOGS/stderr s PSPUBHND_dflt:PubConProcess - APPDOM d s PSPUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBDSP o EI ./LOGS/stderr s PSPUBDSP_dflt:Dispatch - APPDOM d s PSPUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBHND o EI ./LOGS/stderr s PSSUBHND_dflt:SubConProcess - APPDOM d s PSSUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBDSP o EI ./LOGS/stderr s PSSUBDSP_dflt:Dispatch - APPDOM d s PSSUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSMONITORSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSMONITORSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JSL o ./LOGS/stdout e ./LOGS/stderr - A - d - m 5 - M 7 - //hrapp.xflash.com:9000 I have 5-j ANY - 40 x 10 - c 1000000 JSH w s:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JREPSVR o ./LOGS/stdout e ./LOGS/stderr - A - W Pei /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 774 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  
  Thank you

  Please, once you connect to the application server Peoplesoft VM with psadm2, run the following:

  env|grep LANG
  

  And post the result.

  LANG should be C, if this isn't your side follow these steps:

  export LANG=C
  

  And re-start the Appserver field.
  To keep consistency during the startup of the server, add the line in the psadm2 user .bash_profile.

  Changed the .bash_profile or any other initialization file? Because everything should be fine by default.

  Nicolas.

  Published by: Gasparotto N on December 30, 2009 19:09

• Cannot open option programs and features in Control Panel configuration, as well as Windows Defender.

  Original title: programs and features.

  The part programs and features of my Control Panel has been disabled. How can I obtain a permit? My Windows Defender is not as open. Is it possible to use Windows Defender to disable programs and features. I could do this for me.

  I have not tried to use the programs and features for months.  I get a message that says that your system administrator has disabled P & F. I get the same message when I try all the options on the left screen. I am the administrator.

  Thanks for any help you can give me...

  Hello

  
  1. what exactly happens when you try to open windows defender or programs and features in Control Panel?
  2 How long have you been faced with this problem?
  3. you are the administrator of the computer?
  4. have you been able to open the programs and features option or defender of windows without any problems earlier?
  Please provide more information. This will help us assist you better. It is not possible to disable the windows Defender Control Panel.
   
  You can try the steps below and check if this help to allow programs and features.
  a. click the Start button, type gpedit.msc and press ENTER.
  (b) in the left pane, click User Configuration, Administrative Templates, control panelandprograms.
  c. double-click on the page of 'Programs and features' Hide.
  d. now selectnadou E option and click the ok button.
  e. close the Group Policy window.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot access Yahoo, Gmail and other accounts with password in Firefox, but can in Chrome. I type the passwords in myself - not registered.

  Started happening today (22/07/2015) - after the re-opening Firefox this afternoon, I couldn't connect to Yahoo, G-mail accounts, as well as other protected by password. Fortunately, I could access these accounts in Chrome. I don't have browsers save the passwords. I always type them in manually. How can I access these accounts in Chrome and not Firefox? JavaScript or what? The whole Flash issue is also boring. I use more other browsers. Please fix, or I forget quite using Firefox.

  Safe mode is a troubleshooting mode that turns off temporarily
  hardware acceleration, restores some settings and disables
  -Add-ons (extensions and themes). If the problem disappears,
  that tells us something. If it is not the case, this tells us something else.

  • Step 1

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Restart Firefox. Is always the problem?

  • Step 2

  It could be the work of one of your modules.
  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Disable some add-ons, then restart Firefox.

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  If the problem persists, disable some more (restarting FF). Continue until the
  the problem disappeared. After, you know which group is the origin of the problem.
  Reactivate the last group ONE AT A TIME (reboot FF) until the problem reports.

  Once you think you have found the issue, that disable and reactivate all the
  others, then restart. Let us know who the suspect is detective.

• DataSocket server and DataSocket Server Manager are free to redistribute?

  Are the DataSocket server and management applications for free for redistribution DataSocket Server?

  Yes, Datasocket stuff are free to distribute.  It is in a library included in CVI, so it is covered in the license agreement CVI and distribution conditions.

  Here is the license agreement for the software of NOR. http://www.NI.com/legal/license/

  Section 13 covers the deployment of applications.  Paragraph 13.B. covers the fees and States that "in general, you can distribute, deploy, or otherwise make available Applications are allowed without having to pay additional taxes to NOR."  He then goes to the list of exceptions where pay you a fee for the deployment, but the CVI Datasocket is not included in the list of packages that charges a fee.

  I also confirmed this with our sales engineer OR.

• failed to connect user... Cannot access the administrator and I forgot the password...

  failure of the user of account... don't have admin password

  Hi Silvarado3,
   
  I suggest you to visit these below provided article.
   
  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
             
  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.
       
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126/en-us
       Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• IE 7 cannot access the internet and can not uninstall for kb955430

  IE7 abruptly stopped, be able to access the internet - so I tried to uninstall the updates, I got rid of all of them except for kb955430, that has an uninstall option. How can I get rid of him?

  Hi M_khan,

  Welcome!

  You would not be able to uninstall this update, because this update is related to the operating system and Service pack.

  I suggest that you reset the settings for internet explorer on the computer from the link:

  http://support.Microsoft.com/kb/936213

  Check here if you can connect to the internet, if the problem persists, I suggest that you run the Network Diagnostics on your computer, see the link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/7f826a04-B9C3-4edf-bdb6-100691b7319f1033.mspx

  I suggest that you run a Windows Update and install all the windows update on the computer.

  Hope this information was useful.

  Thanks and greetings
  Swathi B - Microsoft Support

• Cannot access all Prgrams and, therefore, microsoft office programs - I can do at home

  My computer has crashed earlier - I got most of the things, but the option all programs have disappeared and I can't access anything that was the who - it adds something that I can do at home?

  Hi pjerry,

  Take a look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/after-Windows-Recovery-virus-all-programs-folders/fe6e2b08-4d66-E011-8dfc-68b599b31bf5

• Cannot access my account and I am the administrator of the system. The user profile cannot be loaded

  I can't log into my account. I am the administrator of the system account, but he said: "the service user profile Service has no log on." User profile cannot be loaded. Any suggestions? I can connect to other accounts, but they are not administrative accounts.

  ·                         Restore point:

  Do in Mode safe, if necessary.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner