Cannot access USB 2.0 VGA UVC WebCam

Similar Questions

• Satellite M50: Cannot access USB stick

  someone could understand the reason why my M50 cannot read access / all external USB memory?
  But them works perfectly if I M50 boot in safe mode and also with other computers? I can advise that the problem started when I have problems - and are still not solved!
  With the upgrade of battery bluetooth in the latest version 4.00.30 (you can follow this task under the bluetooth Board, issues ' Tecra S2: no bluetooth connection possible - why?) »)

  Thank you

  Hello

  You have the same problem with all four USB ports?
  Try to remove all the USB ports in Device Manager, restart the device and try again.

• USB is disabled. Administrator cannot access USB

  Hello

  I need help to enable the USB on the Windows 7 machine to my company. I have an administrator access on this computer.

  Earlier, whenever I plug in the USB, it shows nothing. But I changed the value of register of HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USBTOR-> start of 3

  Now, I am able to see the USB, but every time I click to open it. It says E:\ Is not accessible by car. Access is denied.

  I tried to change the owner of the car through properties-> advanced-> Secuirty

  But it gives the same error again.

  I tried a lot of solutions available on the internet and none of them works.

  Thanks in advance for the help

  ~ Vikas

  Hi Vikas,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Windows cannot access USB storage disks.

  Last Tuesday, all my USB devices worked well.  Now, when I attach a flash drive, windows detects the drive, load the driver, it assigns a drive letter, BUT the drive appears as not formatted with no data.
  By clicking on the player will display the message "the disc in the drive that e is not formatted.  Do you want to format it now?'.»
  All disks are formatted.  All readers operate in other machines.
  All readers will work also in this machine (Dell laptop) IF the laptop is started using a Win7 recovery CD.
  USB mouse works
  Œuvres for USB keyboard
  It's not a hardware problem or a problem of hard drive type.
  I have tried the following with no changes:
  -Restore to a date before last Tuesday when readers were working.
  -Tried to change the drive letter - readers receive a letter and letters of mutation did nothing.
  -Check the Device Manager for errors - none is present.
  -Uninstalled all attached and only USB devices.
  -Uninstalled all USB devices, hubs, etc and restarted - rebuild the USB stack.
  -Using the registry manually deleted the USB devices.  HKLM\System\CurrentControlSet\Enum\USB\ and HKLM\System\CurrentControlSet\Enum\USBSTOR
  -Manually deleted C:\Windows\inf\INFCACHE.1
  -Copied a usbstor.sys from another machine
  -Cleaning of registry with ccleaner
  -Check the IRQ issues - none apparent.  No 'conflict' have been found.
  -Turned off the laptop and pulled the battery.  The Board is reset.
  -Windows Update - all to this day.
  -A little advice was to roll back SP3 but this laptop does not have a single SP3 spunist.exe.  I could not cancel it.
  Does anyone have advice?
  The next logical step is the reinstallation of XP.  Ridiculous.

  Problem solved!

  It turns out it was a rootkit that had messed up my MBR.  GMER found and taken care of him.
  Thanks for all your help guys!

• Cannot access the usb Gizmo.

  Original title: bo

  It cannot access usb Gizmo! Crucial storage device. Window 7 it shows in Device Manager, but do not have access to the device. I used this drive for 4 years, I need the data on it.

  Hello Bobby.

  Thanks for posting your query in Microsoft Community.

  • Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

  I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  Disable USB selective suspend framework. This method prevents your power off USB device.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• 10 Windows cannot access ipod

  I recently used my pc to sync my ipod, upgraded to Win 10 and now the pc does not recognize the ipod, it says that the ipod is corrupted. Can I use the ipod, and I can use it in my car via USB.  Clearly, it's Windows 10.  I connect and get this message: "there is a problem with this drive, can and difficulty now ' when I tell Windows to analyze and correct, I get another message that says:" this disk check cannot be performed because Windows cannot access disc.  If I opened my file Explorer, then plug it in, I see pop up (the full name of it) and after 2 seconds, the screen to explore closes.  Can anyone help or is it just being a fascist again Microsoft?

  First of all, try this procedure to restart the Apple Mobile Device Service

  Restart the Service of Mobile Apple (AMDS) device on Windows - Apple Support

  If this does not help, you can completely remove iTunes and software components.  This Apple document lists all the components of an installation of iTunes and the precise order to uninstall

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, download and install the latest version of iTunes

  http://www.Apple.com/iTunes/

• Cannot access internet without going through "Online Help & Support." ("Windows cannot access the specified path. You cannot ot have permission.)

  Problems: Access to the internet.    2. right of PC, for example, clock, Favorites, etc. does not appear on the screen while booting.

  3. cannot access the Micro password

  Error message: «Windows cannot access the path specified...» »

  When I'm online through the icon help & Support, still cannot access all the other icons; needs access to sites through links.

  First of all, there is problem when I played the game on 'brightness (MySpace link); PC seems to crash and the problem has continued since then.

  I have no idea what to do and I'm a bit of a novice.  In addition, have physical difficulties which slows me down or interferes with the ability to work through problems.

  Applications and links of Facebook can be very dangerous. Please start with the basics to ensure that you are working from a clean base. You will need to obtain the tools of a different, known-clean computer with access to the Internet and put them on a USB stick to transfer to the affected machine.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded

• Two XP computers cannot access shared external hard drive connected to win 7 computer

  I have a Lacie 1 t hard shore connected via USB for win 7 computer. It is shared to "everyone" correctly on the network... with the same settings/properties as internal drives. the other 2 computers XP can see the drive letter and the name of the external hard drive, but cannot access the drive. When I try to save the files on this disc of compuers XP, I get an access denied message. I have caontacted LaCie and they say it is a matter of win 7.

  Hi Faye,

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with access to a shared external drive of Windows XP computers and "Access denied" error message.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Method 1:
  I suggest you to make sure whether or not the disk is shared properties.

  (a) right click on the drive that you want to access.

  (b) click on the sharing tab.

  (c) click on share tab.

  (d) select user name or residential group you want to share with and click on the Add button.

  e level) right click on the user name or the Group residential and fixed the permissions you want.

  Method 2:
  If the problem persists I suggest you apply the full control permission on the disk that you want to share and check if it helps.

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  For more information, please see the link.

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot access on the desktop, the laptop readers.

  I have two computers running Win 7 Ultimate. 1 desktop and 1 laptop. I'm running through a Netgear wireless router. Office is hard wired to the router via an ethernet connection. The laptop has a wireless connection. I also have a cable for color laser printer to the router via an ethernet connection.

  The laptop can see the desktop and can access the printer and some of the hard disks on the desktop. The laptop can detect and access G: and H: drives on the desktop but not C: D: E: and Z: drives. G: and H: drives are located on an external USB disk door. The other drives are connected internally to the desktop. Trying to access drives unaccessable to the desktop, I get the following error message.

  "Windows cannot access \\DESKTOP\Desktop C:.  You are not allowed to access \\DESKTOP\Desktop c. contact your network administrator to request access. »

  The office displays the icon of the laptop in the network, but I get the same error message when I try to access the laptop, but the laptop is overridden to desktop in the above error message. The error code is: 0 x 80070035.

  All readers have enabled file sharing and permissions set for everyone. In fact each player is set up exactly the same thing, and both computers are set up exactly the same except for the name of the computer (eg. Mobile - Office).

  Does anyone have any suggestions?

  Thanks for any help.

  Ed Wood

  Hello Edawood,

  I suggest check to ensure that all services of collective housing began and then retry the connection:

  Open the services menu by clicking Start and then type "services.msc" then on enter.

  Locate the following services in the list:

  ·         DNS client

  ·         Function Discovery Provider Host

  ·         Function Discovery Resource Publication

  ·         Peer networking grouping

  ·         HomeGroup provider

  ·         HomeGroup listener

  ·         SSDP Discovery

  ·         UPnP device host

  Sure they were launched and retry the connection.

  To start the service, double click on it and press the 'start' button in the dialog box that appears.

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• Cannot access page Plugin-based PDB (protein Data Base)

  OS: MacOS Yosemite 10.10.3. Cannot access the http://www.callutheran.edu/Academic_P.../lzipmast.htm Web page that uses a plugin of the PDB. I don't know if there are plugins for this format (s?), in FireFox, or anything else besides. Safari reports that "the sype file not specified", so maybe there is a mistake in the Web page itself (humor: "these biologists are sloppy with their microscopes to $5 million and more, but they don't know much about computers..")

  This page has not been modified since before that Firefox is a browser. There is probably a plugin for Internet Explorer v6 that will display that content. But you'll need a computer with Windows XP SP1 which is never updated Internet Explorer, and then find and install the plugin to make it work.

  You can download the file directly, if you want to try to find a program that will open its doors this: http://www.callutheran.edu/Academic_Programs/Departments/BioDev/omm/lzipper/pdbs/lzipdna1.pdb

• Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

  Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• TypeError: Error #1009: cannot access a property or method of a null object reference?

  Mr President.
  I updated firefox and always this type of problem
  every time I tried to open the flash game site iam getting this question. sometimes IE browser cannot open it too much.
  "".... TypeError: Error #1009: cannot access a property or method of a null object reference.
  to ASGames / fun_Menu)
  to ASGames / frame2)
  at flash.display::MovieClip/gotoAndStop()
  to WeddingTianaDressup_fla::Timeline_102 / playGames ()... » »

  but the same site can be opened in other browsers in the same pc... but the same site a user goes to another computer on the browser firefox itself. How do not know where is the problem... ?
  so please, some can help hu?

  Dear Sir.
  Thanks for your answer...! I did what you said but it doesn't work. new iam having the same problem...!