Cannot access wireless (WRT54GL) options

Similar Questions

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• Cannot access wireless internet.

  original title: have five bars on my connection Wireless in the toolbar with a yellow triangle on it... can not access internet... can you help me?   have already unplugged the modem.  What can I do else?  Thank you.

  having five bars on my connection Wireless in the toolbar with a yellow triangle on it... can not access internet... can you help me?   have already unplugged the modem.  What can I do else?  Thank you.

  Hi Craig d. Payne.

  ·         What operating system is installed on the computer?

  You can run the troubleshooter from network first to see if it can help diagnose and solve your problem.

  a. open the of Internet connections Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type Troubleshootingand then click Troubleshooting. Under network and Internet, click connect to internallyt.

  Access the following articles to learn more about troubleshooting of network services:

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

   

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Let us know if that helps.

• cannot access the internet options of 'tools '.

  When I go to 'tools' I am not able to access Internet Options of this key.  Please notify.

  Hello

  What version of Internet explore you are running.

  Have you tried booting in safe mode?

  Concerning

• Cannot access my WRT54GL site

  I have two new computers, and when I go to access the router it ask on connection news. I know that I put in the info just because I can get by using my old computer. I have to give permissions somehwere allowing access to new computers?

  The router is a worm WRT54GL 1.1

  Nevermind, I figured it me

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• cannot access wireless internet every time I start up computer... do it manually

  whenever I start my computer I have to click on start then run and type "services.msc" then press ok, and then click wireless zero configuration and start it. then make a right click on the little computer with waves on the bottom right of my view select tray of wireless networks and then select change the order of preferred networks, and then under the networkes wireless tab check use windows to configure my wireless network then go back and view wireless to connect to the internet...

  is there a way to correct so I don't have to do that every time I start my computer?

  Thank you

  Noelle,
  You can go to Device Manager and remove the wireless network adapter.  Then go to the website for the manufacturer of PC and download the downloaded current drivers.  Then restart your PC, and after that he finds the card even once use the new drivers with it and see if that helps.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access REGISTRY EDITOR, can not access the folder/search options, impossible to write on DVDs, etc..

  I downloaded some sort of virus... System locked during the update to SP2...
  Windows would NOT start...
  Removed the hard drive and inserted in the external box.  External attached to the computer with a software 'quality '.  DELETED malware...
  Re - slot atmosphere inert hard drive to the system, windows starts with the recovery disk, completed the installation of SP2, windows starts!
  Cannot access registry editor options, folder and search "grayed out", write data on DVD, etc., etc., etc.
  Pulling hair, don't want to leave, ALL ADVICE?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My wired network cannot access computers connected wirelessly

  Very strange problem of networking:

  Everything is Windows 7 and the network is defined as a working network.

  My laptop (wireless) can see and access my desktop (wired), but my desktop computer, although it can see my laptop, cannot access.
  If I connect the laptop cable, the Office can then access. I do not change anything, just plug in the cable.

  If also connected to my netbook with unusual results. The netbook runs Windows 7 starter and is wireless
  He can see the desktop and the laptop and access, but does not appear in its own computer network list in the Explorer.
  It is visible in the desktop browser, but are not accessible from it. It does not appear on the Explorer of the laptop at all.
  If I have the cables up to the netbook, the Office can then access it, but the netbook can then access the laptop if it is wireless.

  Just to clarify - netbook on wireless - I can access the laptop (wireless or wired)
  NetBook on cable (wireless or disable as well) I can still see the laptop, but cannot access it.

  When I first put this network - a couple of years - all spoken at all. I think I lost it after an upgrade of windows, but don't know when because I rarely access the laptop from the desktop, usually the opposite.
  Anyone got clues? Or how can I delete all networks and start again because I have a different network (same working group) on each PC name, but I can't change the names - windows seems to decide what to call them.

  Hello

  Thanks for the reply.

  I would appreciate if you can help me with the following information.

  1. what happens when you try to access wireless computers? You receive an error message/code?

  2. don't you try to access folders to disable firewall/antivirus?

• Satellite A300D - 13 X - cannot access the internet through wireless

  Hi all, I wonder if anyone can help me, try and tell you my problem as clear as possible.

  I am more able to access wireless internet. Tried to conect via the ethernet cable and that does not work either but broadband still work as my PS3 is still accelerating signal and can still connect via WiFi with my phone.

  Everything was working fine one night and the next day nothing!

  Any help greatly appreciated

  Thank you

  Mark

  > There is a yellow exclamation point in Device Manager
  > Cheked that all the drivers and they work properly

  I put t know why you are 100% sure that the drivers work correctly if the yellow exclamation point appears in the Device Manager.
  Once again; wireless network adapter appears on Device Manager-> network without any exclamation yellow cards?

  If this isn't the case, then you need to reinstall the WLan driver again!
  The laptop seems to use the WLan-RTL8187B REALTEK card 802.11(B/G) and you need Realtek WLan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• Cannot access connections wireless on HP Pavilion dv5

  Product name HP Pavilion DV5 laptop

  Windows 7 Home Premium operating system.

  Error message: Wireless message "no connection is available.

  No changes were made to the system

  I can't access wireless connections, even if the other devices have access to connections.  Wireless adapters work, but I can't seem to 'see' all wireless connections. /

  This has just occurred recently-never a problem in the past.

  Any recommendations?

  I recommend you update your BIOS. Go to http://www8.hp.com/us/en/support-drivers.html , and then type the name of your product in the search box.  Choose the Dv5 Entertainment Notebook that you have and select.  On the next page select your operating system Windows 7 Home 32 or 64-bit. Once on the correct driver for your laptop page choose BIOS in the list of drivers. Please update your BIOS and reboot. This should bring your WIFI connection. Please let me know if that solves this problem.

• Cannot start on the screen and can not access early startup options

  Original title: no access "advanced boot options".

  I've had my new Sony Vaio laptop for a little less than two months now, it came preloaded with Windows 8. However this afternoon after startup, I got a blue screen, followed by the message: "repair disk errors. It may take more than an hour to finish '. After less than 10 minutes, it restarted itself, only to start on a black screen with a cursor. When I stop or put it to sleep, it will start ONLY at the back screen after a short while on its loading screen "VAIO". Windows does not make me a "Advanced Boot options" as it should, so I have no access to any system restore, update them or safe mode options.

  The only thing I've been able to think is to ask a Windows 8 install disc my manufacturer because I don't have access to an iso of windows 8 DVD/USB to boot from. Are there other options I can try as I wait to hear from Sony on an installation disk? I am so far not impressed with 8 in all, the system "Advanced Boot options" auto seems ridiculous to me.

  I looked at the options for creating the installation of Windows 8 media, and I have access to another computer running Windows Vista to create this, but I don't have access to a product key of Windows 8, because my Sony notebook came with the operating system pre-installed, and I couldn't find a key product or on the laptop itself , or anywhere in the documentation that accompanies it. For this reason, the Installation of Windows 8 media doesn't seem to be an option for me.

  However I saw a feature on my phone that allows me to start directly on the boot advanced options. an assist beside my power button which, when I hold while the laptop is turned off, starts directly at the menu said.

  Now that I have access to advanced startup options, I tried an auto-recovery, he said was not possible, and I also had the same thing when you attempt a system refresh, so was the only thing I was able to reset to the factory settings.

  I still have no idea what triggered the problem, or why it was not possible for automatic retrieval or update it, however it seems to work fine now that it is restored to factory settings, though not ideal or practical.

• Why my VPN clients cannot access network drives and resources?

  I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!

  : Saved

  :

  ASA Version 8.2 (5)

  !

  ciscoasa hostname

  Cisco domain name

  activate the password xxxxxxxxxxxxx

  passwd xxxxxxxxxxxxxxxxx

  names of

  name 68.191.xxx.xxx outdoors

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.201.200 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address outside 255.255.255.0

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.201.1 server name

  Cisco domain name

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group network obj - 192.168.201.0

  FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0

  NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0

  FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any

  Extended access list-NAT-FREE enabled a whole icmp

  allow any scope to an entire ip access list

  allow any scope to the object-group TCPUDP an entire access list

  allow any scope to an entire icmp access list

  inside_access_in of access allowed any ip an extended list

  inside_access_in list extended access allow TCPUDP of object-group a

  inside_access_in list extended access permit icmp any one

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access allow TCPUDP of object-group a

  outside_access_in list extended access permit icmp any one

  Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0

  access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0

  inside_nat0_outbound list extended access permit icmp any one

  inside_nat0_outbound_1 of access allowed any ip an extended list

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global 1 interface (outside)

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 192.168.201.0 255.255.255.0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1

  Route inside 0.0.0.0 255.255.255.255 outdoor 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.201.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ciscoasa

  Keypairs xxx

  Proxy-loc-transmitter

  Configure CRL

  XXXXXXXXXXXXXXXXXXXXXXXX

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP allow inside

  crypto ISAKMP policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  allow inside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

  Cisco by default field value

  attributes of Group Policy DfltGrpPolicy

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  WebVPN

  SVC request enable

  internal KunduVPN group strategy

  attributes of Group Policy KunduVPN

  WINS server no

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Cisco by default field value

  username xxxx

  username xxxxx

  VPN-group-policy DfltGrpPolicy

  attributes global-tunnel-group DefaultRAGroup

  address VPNIP pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  type tunnel-group KunduVPN remote access

  attributes global-tunnel-group KunduVPN

  address (inside) VPNIP pool

  address pool KunduVPN

  authentication-server-group (inside) LOCAL

  Group Policy - by default-KunduVPN

  tunnel-group KunduVPN webvpn-attributes

  enable KunduVPN group-alias

  allow group-url https://68.191.xxx.xxx/KunduVPN

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc

  : end

  don't allow no asdm history

  Hello

  What is the IP address of the hosts/servers LAN Gateway?

  If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.

  For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.

  • Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
  • Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
  • Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
  • Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
  • Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP

  So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)

  I would like to know if the installation is as described above.

  -Jouni