Cannot acquire IP address, or to renew or repair... How to fix this?
I'm trying to help my friend to get his work computer. For some reason, it cannot acquire an address of network on a wired or Wi - Fi. The strangest thing about all this is that I am able to connect to my wireless network but it says that I have little or no connectivity. Just for the heck of it, I was able to connect to my router (IP: 192.168.0.1) and has been invited for a connection.
My IP address when connected to wifi is 0.0.0.0 and my subnet mask is 0.0.0.0... everything else has no value.
One strange thing I noticed right away, is that when I run 'ipconfig' the 'the connection-specific DNS suffix"has been set to"aDomainName.net"which has the same area as his previous ISP name. I removed that there is NO suffix more. That has not changed a thing. So here's what I've tried:
- The TCP/IP value to set a static IP address and even separate servers DNS (OpenDNS).
- Repair the connection.
- Remove winsock and winsock2 registry, and then restart. Hoping that windows would create new and solve the problem.
- Any registry winsock and winsock2 starting from the backups that I did.
- Tried flushing DNS with: "ipconfig/flushdns" and running "ipconfig / renew" I got the following error message:
"No operation can be performed on the connection to the LAN, so it has its media disconnected
An error occurred while renewing interface wireless network connection: the RPC server is unavailable. »
- Before and after removing the winsock from registry, I also tried running: "netsh int ip reset resetlog.txt" and received the following error:
"The procedure entry point MigraeWinsockConfiguration cannot be locatred in MSWSOCK.dll dynamic link library."
Can someone help me?
A few comments (which can not solve your problem, but it's late)
1. the "Teredo Tunneling Pseudo-Interface" part of IPv6 (the new version of the TCP/IP Protocol). It is almost never necessary in personal computers, especially the XP computers. (BTW, what version of XP is installed, including service pack?)
- Open network connections (start > run > ncpa.cpl > OK)
- Right-click on the icon for your network adapter (you should do this on the connection to the LAN (wired) and the wireless adapter) and select Properties.
- On the general tab, look in the list of "this connection uses the following items.
- Most Windows XP-based computers must have a maximum of 4 following
- Client for Microsoft networks
- QoS Packet Scheduler
- File and Printer Sharing for Microsoft networks
- Internet (TCP/IP) Protocol
- If you see an item for IPv6, select it and click the uninstall
- OK your way out
2. I'm a little skeptical about this KB article. The registry key to designate "CurrentControlSet" instead of "ControlSet001", I would have expected
Any, however. Use the Services applet to confirm the appropriate dependency:
- Click Start > run > services.msc > OK
- DHCP client scroll down and double-click
- Click the Dependencies tab and wait that it is filled. It should show
- SFM network support environment
- NetBT
- TCP/IP protocol driver
If you expand (by clicking on the +), TCP/IP protocol driver will be also under NetBT and IPSEC driver will be under (two places) TCP/IP protocol driver
Assuming that everything is there (and it probably is), the next thing to check is if all these "Addictions" are running.
- Open a command prompt window (start > run > cmd > OK)
- Type of entry following, pressing after each line
SC query afd
SC query netbt
SC query tcpip
SC query ipsec
You should get the following result which shows the State of all 4 as 'operational '.
C:\>SC request afd
Service_Name: afd
TYPE: 1 KERNEL_DRIVER
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0
C:\>SC query netbt
Service_Name: netbt
TYPE: 1 KERNEL_DRIVER
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0
C:\>SC query tcpip
Service_Name: tcpip
TYPE: 1 KERNEL_DRIVER
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0
C:\>SC request ipsec
Service_Name: ipsec
TYPE: 1 KERNEL_DRIVER
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0
Tags: Windows
Similar Questions
-
cannot acquire network address. The error display: 12007 on Windows XP
Cannot acquire network address, showing the error 12007.
Running system is Windows XP. HELP PLEASE.
Hello
-For how long have you had the problem?
-Did you change on your computer before the show?Follow these steps and check if they help.
Step 1:
a. Click Start, click Run and type 'cmd '.
b. go to the command prompt and type: "ipconfig/flushdns". And then click OK.
c. then type ' ipconfig / renew ' and press OK.
d. then type "netsh int ip reset resetlog.txt" and click OK.
e. restart your system and check.Step 2:
Reset the TCP/IP settings and check if that helps.
-
Cannot execute code 80070005 does update... How to fix?
Cannot execute code 80070005 does update... How to fix?
Hello
Update you are trying to run?
Perform the steps in the article and see if the problem persists.
http://support.Microsoft.com/kb/971058
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesAlso check the link mentioned below as a reference.
Hope that helps. -
How can I fix this error code:
The XML page cannot be displayedCannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.
System error:-2146697211. Error during processing of resources "file:///C:/Documents and Settings/a/desktop/SMART.xslt.
The operating system is Windows XP Home Edition. I use browsers IE 8, Safari and Mozilla Firefox.I'd never see this error until I installed HDDScan (http://hddscan.com/), a diagnostic utility, to check my hard drive. The test is a S.M.A.R.T. analysis and produces this error message when you use this software.A web site indicates that installing Microsoft. NET Framework can solve this problem. I already have this class in Add Remove Programs: Microsoft .NET Framework 1.1, Microsoft .NET Framework 2.0 Service Pack 2, Microsoft. NET Framework 3.0 Service Pack 2, Microsoft .NET Framework 3.5 SP1, Microsoft. NET Framework 4 Client Profile.Is the problem, a missing software program or a corrupted file? What is Microsoft. NET Framework? I use selective with most of the disabled items in the services (except hide all Microsoft) and start more disabled under Startup. Is there something that needs to be checked to activate a service or start to correct this error message?How to solve system 2146697211 errors: cannot display page XML cannot display the XML input using the XSL stylesheet?Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can follow the link for your question.
http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads
Hope the helps of information.
-
Original title: Please help with the error "xferrecv_RecvMain(): error 661 socket(), 10044.
I get this error and I am unable to acquire an IP... using Windows XP. Help, please! Thank you! xferrecv_RecvMain(): error socket() 661, 10044Hello
Try the methods provided below and check if the problem persists.
Method 1:
Try the steps in the link below to force a network adapter to acquire an IP address
Method 2:
If the step above do not contribute to try to renew the IP address.
To renew your IP address:
un) Open windows command prompt Start\ Run\cmd\ok
b) to release your Ip address ipconfig/release
c) to renew your IP address ipconfig/renew
d) Exit
-
What would cause a computer to lose the ability to acquire an IP address and how do I solve this problem?
Hello
Maybe this can help, http://www.ezlan.net/debug.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Oops the browser does not block my address of responsible email addresses - how to fix this?
Oops browser is blocking popup windows - up - msg error - appears when I try to access my address book.
How can I stop this from happening?Yes, thanks now it works. Great help for a novice. I'll be back to help with my following problem.
-
I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7). I am also unable to start my computer in safe mode. My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system. The virus also seems to have removed all the system restore points before the infection! I believe that I have the virus completely deleted. I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials. I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One. Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program. I need to know how to get Windows Firewall works again & get Action Center working properly again. My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings! Can anyone help?
Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.
Hello
Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)
This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)
Download the two files from the registry
Windows Firewall - MpsSvc
BFE - base filtering engine
Run them and click YES when you receive a UAC prompt
Restart your PC
Press Windows key + R and type
regedit , and then click ok
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE
Right click on it -permissions
Click ADD and type
Everyone, and then click ok
Now click on all
Below, you have the permission for users
Select full control, and then click ok
Press Windows key + R and type
services.msc , and then click ok
Start the service database and then filtering engine service windows firewall
If you still get this error
Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.
Download and launch this key
Click YES when you receive a UAC prompt
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess
Right-click on -permissions
Click Add and type
Select full control and everyone
You should be able to start the firewall now
You can also Miss defender of windows security center, BITS and windows update services
Download
Security service center - wscsvc
Windows Defender -windefend
BITS - BITS
Updated Windows - wuauserv
Run them and click YES when you receive a quick restart, UAC the PC
Good luck
* Edit *.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk... -
My daughter just upgraded to an iPhone 6s. She is not able to receive or send emails... Besides, she can't still access his Messages. Earlier, the phone wants to switch to 9.3.5... will it solve this problem of e-mail?
Go ahead and upgrade to same 9.3.5 so that will probably not solve the problem of electronic mail (additional security is important). Then try to reset your email account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider, click the account, and the blow to remove. Then restart the unit. Then go to settings > mail... and to add the account. Follow this:
Set up an e-mail account on your iPhone, iPad or iPod touch - Apple Support
-
Currently, see email in text-only format and see not all html format settings in Mail preferences. How to fix this, thank you!
If the messages you receive have been created in text mode, you will see them in text mode. If they were created using HTML, you will see the HTML.
-
you have a tool I can down load for a problem of d3dx9_31.ddl?
Hello Vernon Cook.
Simple solution, download the latest DirectX runtime Installer. http://www.Microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&ProductID=9C954C37-1ED1-4846-8A7D-85FC422D1388
Hope that helps. :-)
Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
-
Whenever I invoke the turn on now, he fails to get the updates (if the Defender is out of date) or it's up-to-date (because I've updated through the Defender on the interface). Regarding anti-virus, Security Center reports that Kaspersky PURE (obviously running not far from the clock on the toolbar) is / was not found. You can see in the screenshot below. Please note that Kaspersky PURE runs (lower right corner of the image) despite Security Center claiming otherwise.
Is there something wrong with the part of my Vista operating system or what? How I solved this 'blindness' of the Security Center? Thank you.
According to this link, you should not use Kaspersky Pure and Windows Defender on the same computer: http://support.kaspersky.com/faq/?qid=208281579
Try disabling Windows Defender and restart the computer.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off
If the "Security Center" does not always recognize Kaspersky, suggest contact Kaspersky Support or ask for help in the Forum Vista:
http://answers.Microsoft.com/en-us
Kind regards...
-
It is an intermittent problem - the message says something like the computer can not find attached messages always want to send the email. I can see the attachments so I do not understand why it does this.
all ideasIt is an intermittent problem - the message says something like the computer can not find attached messages always want to send the email. I can see the attachments so I do not understand why it does this.
all ideas1. when it happens again, temporarily disable your anti-virus mail option electronics scannibg. Try to send attachments again.
If it works, that's your problem.2. Please see if one of your settings match the following:
Open Outlook > tools > Options > Mail Format tab, in the compose in this message format: set as HTML > OKt-4-2
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
Windows Security Service cannot be started, how to fix this?
HelloI use Windows 7 Home Premium. Window Defender won't start. When I click on it in the Panel, he says "this program is disabled." There is a link that says: "If you do not use this program, click here to turn on. When I click on this link I get the message "the dose of specified service does not exist as an installed service (error code: 0 x 80070424)". " When I go to the Panel and the Panel of Services, the program is not listed. So I downloaded the program and tried to install it. He would not have installed. I get an error that says it is part of Windows Vista and requires no installation. It's strange to me that I am running windows 7.I then in the center of the Action. There, I found the Windows Security Center Service is disabled. There is a button to turn it on. Thought that would solve my problem I clicked it, only to get the message, "The Windows Security Center Service Can not be started."I ran the program Microsoft Fix It. There is no problem. The program is not there or if it is I don't think that and it want let me install it.Can you please tell me how to get Windows operational defender and how to get started (running) Windows Service Security Center.Thank you... David SamSome other security programs will be disable Windows Defender, it is normal to prevent conflicts.
Do you have what security/antivirus program installed?
Maybe you are looking for
-
REGZA 37A3030DB menus come for a few seconds & disappear; works with the DVD
Saturday afternoon, TV channels stopped working. The TV works fine with DVD or laptop, but not with the channels (i.e. we cannot watch live TV) and the menu buttons appear on the screen for 2 seconds max before disappearing. It already happened but h
-
Text message sent by LabVIEW by using ActiveX controls and Internet Explorer
-
Write equations on the front for data acquisition
Hello I was wondering if its possible while a VI is running for: Write an equation custom on the façade. Use the equation on data acquired since the VI is running. Draw the calculated data. See you soon
-
Cannot find the files and shortcuts do not work
I'll try and make this as short as possible. I was moving things in and out of Dropbox on my desk. I decided that I didn't want a certain folder in there, so I brought in My Documents. When I checked later, the record was missing video files. (In fac
-
my pictures have been restored after fakealert virus, but now are grayed out
All my docs and photos disappeared as a result of I think the fakealert virus. I ran exe mcafee stinger and it restored all my docs. My pictures appear, but are dimmed. When I try to open them, I get a message error that says 'other folders exist. se