Cannot add additional CONTACTS
Hello!
I am trying to add an additional connector - going whith hznAdminTool:
hznAdminTool addvm - type CONNECTOR - ip = xxx.xxx.xxx.xxx = - useGatewayAsIDP = y - directoryPassword = xxx
Please check the configuration of the new virtual machine-
TYPE: CONNECTOR
IP address: 172.16.106.18
Hostname (DNS resolved): hzn - connector2.hosting.corp
Gateway as IDP: YES
Let the virtual machine under maintenance contract: YES (default)
This configuration is correct? (o/n - n will be output command) [y] :
When I type there:
-bash: y: command not found
[1] + stopped hznAdminTool addvm - type CONNECTOR - ip xxx.xxx.xxx.xxx - useGatewayAsIDP = = = y - directoryPassword = xxx
And nothing happens...
Help, please!
You have special characters in the directoryPassword? If so, you may need put it between quotation marks.
In addition, you can add - silent option for the command and the race, which will increase the order, without typing anything.
Tags: VMware
Similar Questions
-
WAP4410N - cannot add additional SSID. 1 only available SSID.
Hello
I want to divide the use of the AP so that visitors are on their own connection wireless and VLAN.
We have 2 WAP4410N APs. An access point acts as a Repeater for the AP another.
They are both in 4.0.4.2 firmware.
We use WPA2, RADIUS authentication, and would like for visitors to use WPA2 PSK.
Under the wireless tab, I have 1 SSID, but the other 3 available for SSID boxes are grayed out.
When I click on them, they don't allow me to type a code.
I watched a video of how to do to add SSID and VLAN, and it looked pretty simple.
It just clicked in the area and was able to add more IDs.
Could my current config help add additional SSID?
Thanks in advance,
Vince
Hello vdinenna71
The WAP4410N does support multiple SSIDS but only in AP mode. The use of Repeater mode will limit your SSID wireless to a single.
If you can get all the access points must be connected, you can put them each in AP mode and have multiple SSID.
-
Cannot add additional VDMKs for storage
I'm trying to add additional VMDK for storage. By guide, added to the disks on the virtual machine for the data - will. Since the console for data - is connected with root. The/opt/vmware-hdva-install/bin/zca-expand-lv of command indicates "no new disk found.
The instructions in the installation space Horizon online guide are very frank and I started on a couple of times. All sauce secret I'm missing?
I had to restart the device after you have added the additional disk until the zca-expand-lv command found...
-
BlackBerry smartphones cannot add/edit contacts
Recently im unable to add or edit contacts for my fourth "BOLD", blackberry tried rebooting but did not help, do not know how to solve this problem?
Please click the link below and please let us know if that fixes the problem.
Cannot change or create new contacts to the address book of BlackBerry
Guilbert
Ron
-
Original title: research index
When I tried to 'Add contact' comes from the shape of triangle and he said that there could be no active internet connection. Check your connection and try again, but I checked the connection and everything is Ok. Then I completely I rCemoved and reinstalled Skype. But the problem remains as it is. Can someone help me please?
Hello
Help for Skype: https://support.skype.com/en/
Browse the FAQ and how to Guides or by post to the Skype community
http://www.Skype.com/go/community
More:
How can I get support for Skype? :
https://support.Skype.com/en/FAQ/FA12046/how-can-i-get-support-for-SkypeDon
-
I use Blackberry Curve 8520.
Previously, I had problem with device software and I reintall the software of the device according to your advice.
Now my motto using the software v5.0.0.681 (Bundle 1168, platform 5.2.0.67) and I have problem in my phone book.
When I try to add a new contact, nothing happens (I press the button), to an existing contact, I only view the details but nothing happen when I pree the button to edit the contact details.
What's wrong?
Hey! Guys,
Still no word from Blackberry, but they are pretty active on twitter.
Please retweet this to get their attention to this issue.
-
Cannot add additional processors to a virtual machine.
I have a DELL PowerEdge R720 host running ESXi 5.5 1474528 and there are 3 VM.
I am using vCenter Server 5.5.0 Build 1476327 Essentials accessing via the web client of vSpere
40 logical processors
20 CPU X2.20 GHz
2 taken
10 carrots per socket
ALL of my virtual machines are windows X 64, version 10 hardware servers
4 CPU file server
RDS 4 CPU
Veeam DAS proxy server 1 CPU
I can not add any extra CPU on the third server. I can adjust the CPU count on the other two VM, but not the third.
License is
VMware vSphere Essentials 5 more (unlimited cores per processor)
Hi, have you tried downing the virtual machine and see if you can change the CPU then?
-
Cannot 'Add a Contact', blue screen just get & clouds.
Hi Tamim. Excellent, thank you very much for your help. Works!
-
I am Hubert,
I had 2 problems:
the first is with my Windows Live Messenger and the second with Windows messenger.
a first:
(Windows Live messenger) won't let me sign in! error code # 800488fb
They said they have blocked my account according to someone used to send SPAM messages and turn it back on, I had to give them my cell phone #, so they can text me a sort of code of repair, BUT I don't have a cell phone, and they redirect me here
So is anyone who can help me to solve my problem? Either way, I'm using Windows XP Pro
Second problem is with (Windows Messenger)
This one, that I can sign, but it won't let me add more contacts on my friend list, say, there is more to limit the number of contacts, and I only see one, so what do I do to see the others, so I can remove them.
You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2
These latest related discussions:
I have no contacts and it says to your list of contacts is full:
http://windowslivehelp.com/thread.aspx?ThreadId=7b1a179e-525b-444A-9379-fcbb927419b6I can't add new contacts. The message said: there is a problem with Windows Live and I have to wait... :
http://windowslivehelp.com/thread.aspx?ThreadId=0754a027-A414-4aab-88E6-935ef9a7bd88It cannot add new contact:
http://windowslivehelp.com/thread.aspx?ThreadId=859644c1-641A-46FB-939d-bb2af8b1bf50Direct does not add my new contacts:
http://windowslivehelp.com/thread.aspx?ThreadId=d5c9caf2-5484-4F83-b98a-5ce4666c4b77 -
Contacts app - cannot add a group contact
Contacts app needs a bit of love programmer.
I am trying to create a new group of contacts (* no * a "Smart group").
I created the (file-> new group) group. Tried to created in the section of the sidebar and "on my Mac" iCloud Same behavior.
I select "All Contacts" and enter a keyword to search for. If the contact is not in the Contacts, but is in the Mail, you * must * "Add to Contacts" entry allows you to drag the contact into a group.
You * might * be able to do it once or twice, but soon the Contacts won't you allow to drag anything else in the new group you created.
If you leave Contacts and re - open, you can add one or two people, and then it stops once to answer more trolling.
All this experience? Or a solution?
Hi there, Mark Rushton!
Contact groups can be quite practical, and I understand your message you are having a little trouble to create yours--you cannot drag contacts you want in the Group shortly after. I know it's important to be able to create these groups with all you need, and I have a few steps, we can try troubleshooting.
- Exit the Contacts App. Hold down the SHIFT key on your keyboard. While now Shift, re - open Contacts. Try to add to your group again.
- Restart your Mac. Click on the menu Apple in the upper left of your screen, then select "Restart" in the menu dropdown. When the computer is back on, Contacts open and try to add to your group again.
- Test of a new user account. This will help determine if there is no data that could cause a conflict. Instructions on the configuration and test in a new user account can be found in the article from the link below.
- Try to create your group in Mode without failure. Use the following article to help get into Safe Mode. Even if the title is not specific to your question, it's still a big step to take. Safe mode runs checks on your system and prevent execution that might be the cause of some software conflicts.
Have a great day!
-
Cannot add, remove, or edit contacts in the address book.
Original title: address book problems
On Windows XP, use Outlook Express, am not able to ADD, REMOVE, or EDIT contacts in my address book... not really sure WHY... any help will be GREATLY appreciated. Thank you very much.
Hello
Welcome to the Microsoft community!
The description of your post, I see that you cannot add, remove, or edit contacts in the address book.
Please, try the steps from the following link:
An Outlook Express basic repair kit
http://support.Microsoft.com/kb/2398839
I hope that helps!
Answer please if you need help on this page or the Windows problems.
We will be happy to help you!
-
Cannot add Contacts Windows Live Mail rule
I'm trying to implement the rules of e-mail in Windows Live Mail on Windows 7 computer. I would first of all a folder to retrieve messages from all my Contacts (i.e. real people) and another to retrieve messages from organizations, I am interested in / attached to but whose email I have to see every day.
Have implemented a rule, I cannot add Contacts, even if it seems that I should be able to. Specifically, I'm trying to set up a rule to sort mail "when the line contains people". In the box "Select individuals", the statement is to "enter one name at a time and click Add, or select the names of your Windows Live Contacts" HOWEVER, we don't know don't not how to select the names of the Contacts. When I click on the Contacts button, I just get a list of Contacts but can't copy and add names to the mailbox rules.
I'm not typing one by one. I need help.
Thank you.
While in the message rule, click the Contacts button and then double-click a Contact , and click Add. That should add to the rule. -
BlackBerry Smartphones cannot add or edit contacts on BB 8520
Hi, I am a beginner on this forum so apologies if this topic has been discussed before.
I gave my "old" Blackberry 8520 to my husband that I had updated.
He put the sim card from his phone Samsung with the BB.
Now, he cannot 'Add contact' or modify one of his contacts.
I had wiped the phone and he returned to factory settings before I gave it to him.
It doesn't have all of the messengers on it except BBM.
I'd appreciate your feedback / advice on that.
Thank you very much in anticipation.
Hello!
Try the following:
Just delete all applications (Yahoo, MSN or Live) email you may have recently updated / delete applications that were recently installed before the error started actually took place.
After that, disconnect the battery while the phone is always "on" and reboot the phone.
In fact I had deleted a whole bunch of applications to facilitate my upgrade of the OS that I had not enough memory on my device.
This not only helped solve my problem mentioned above, but also makes my phone restarts in less than 3 minutes (restarting earlier was done in no less than 15 minutes!).
My conclusion from the above incidents is to keep your apps in the bare minimum so that your phone performs the best.
I hope that solves your problem!
If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors is not invest more of their time on this Message.
Thank you.
-
Smartphones blackBerry eception exception: cannot add contacts
untrapped exception net_rim_bb_addressbook_app (303) does not. the process is completed.
Always get this error message, cannot add contacts on my phone. Bold 9700 OS6.
kindly help
freestyle2580 wrote:
still can't add contacts on my phone
This has been a recurring problem for the phones Blackberry OS5 and below. Please click the link below:
Cannot change or create new contacts to the address book of BlackBerry
Ron
-
Cannot add contacts for the 'To' and 'cc' Box when sending emails
Original title: emails
cannot add contacts to the area "to" or "cc" box when sending mail that I only get the option to add addresses to a small drop-down list when I click in these boxes. I tried to uninstall the application and reinstall but made no difference!
If you click on the "To", "Cc" or "Bcc" once he frequently gives you used, click New and , it gives you the complete list. You can switch backwards between them by clicking on
A more permanent solution For OutlookGear
Several e-mail settings
Customize Outlook
Advanced Privacy settings
AutoComplete suggestions
Give suggestions for anyone I contacted (contacts and non-contacts)
Save
Maybe you are looking for
-
HP DC5800 SFF PC (NV321UA #ABA) 32-bit
I was wondering if I could put in the following processor to move to 64-bit:Intel Core 2 Duo E8600Also, I have to change the motherboard too? If so, any suggestions?
-
Dear Sir, I get the email of Microsoft Corporatio n price Center.
He said that "this correspondence officially confirms that we acknowledge receipt of your email, regarding your prize winning notification price worth 1 million large pound sterling (GBP) as we sent it to your mobile phone as dated: July 18, 2012.» C
-
How to recover a deleted MS Office document
It has been deleted accidentally, a MS Word document and I wanted it back. Is this possible?
-
HP Pavilion 23-p030na: preset internet homepage.
Can someone tell me what the preset address home page is on the HP Pavilion 23-p030na all in one office, one of my grandchildren has change and I can't get it back. It will display a picture every day somewhere in the world and not the charge of adve
-
Presario cq40 144 do YOU: Presario CQ40-144 - TU Ram Upgradation
Hello team HP, I use a Compaq Presario CQ40 - 144TU, Windows 7 64 bit. I want to upgrade RAM. But I don't know exactly the frequency of the ram to be updated. What is 667 Mhz or 800 Mhz? which is more suitable for my laptop? Is it possible for me to