Cannot capture keyup

Similar Questions

• Cannot capture with Premiere CS6 with canon XA20

  Recently purchased canon XA20 and attempted to capture form this unit, but the peripheral States is in offline mode.  I recorded media AVCHD, 18MPS LPCM (59,94 P) recording mode.  In the canon of a type first developed device.  of course the XA20 does not appear for the type of device do not know what to put.  I used only the standard and it does not recognize the camera.     I would appreciate help Anny in setting.

  HI Dakota,

  You cannot capture AVCHD files. You copy the map on the media player and then ingest them via the media browser in Premiere Pro. Hope that helps.

  Thank you
  Kevin

• Satellite X 200 PSPBUA cannot capture video using the firewire port

  Satellite X 200 PSPBUA 00N007

  I try to capture dv video from a camera via a capture software but is not working/errors generated.

  Tried Pinnacle and free software that do not work. Texas Instruments 1394 OHCI driver exists and works OK.
  Satellite X 200 PSPBUA 00N007 upgraded to Windows 7 64 bit.

  Any suggestions appreciated

  > I'm trying to capture video from a camera via dv capture software but is not working/errors generated.
  What happens exactly? This error message do you have?

• HP DM 4.5 SP2 cannot capture an image of WES2009 of T5740

  We use Altiris and have problems with PXE. To deploy images that we intend to migrate to HP Device Manager 4.5 SP2. Installed on a Windows 2008 R2 and FileZilla Server. EVERYHING works fine, but when I capture an image from a thin client WES2009 T5740 custom image will not capture. The thin client EBOOT 2 times and installs some files on the workstation. After the installation of the files, the thin client is reset each time in Windows. You see a HP backupground. A windows Device Manager is popping up and restarts the workstation. No idea why it does not work. If I capture an image Windows XPe to a T5730 capture with FTP works fine. With T5740 WES2009 won't yet make the FTP connection. I tried an old image of WES2009 and the last image of WES2009. It does not work.

  Today I installed the Device Manager in the production environment. The mentioned in the above 2 posts is a facility in the environment of the OTA. In production it works. Image captured from the Device Manager is saved with the option of shared folders.

• Warning Dialogues - cannot capture the button clicks

  Now that I can finally connect to the Simulator with the debugger, I can come back and work on my app!

  I'm trying to be on the QNX Dialogue class... specifially the AlertDialogue, that I will use for the warning of use of data like most of you...

  I looked at the example code, but for some reason, I can't click on the events of the Dialogue...

  Here is my code:

  package com.content.modal{  import flash.display.Sprite;  import flash.events.Event;    import flash.events.MouseEvent;
  
   import qnx.dialog.AlertDialog;    import qnx.dialog.DialogSize; import qnx.display.IowWindow; import qnx.events.DialogEvent;
  
    public class AirtimeUsageModal extends Sprite {
  
         private var alert:AlertDialog;
  
        public function AirtimeUsageModal()       {         init();       }
  
         private function init():void      {         alert=new AlertDialog();          alert.title="MY TITLE";           alert.message="MY BLURB HERE.";           alert.addButton("Quit");          alert.addButton("Acknowledge");           alert.dialogSize=DialogSize.SIZE_SMALL;           alert.addEventListener(DialogEvent.DIALOG_BUTTON_CLICKED, alertButtonClicked);            alert.show(IowWindow.getAirWindow().group);
  
        }
  
         private function alertButtonClicked(e:DialogEvent):void       {         trace("Button Clicked Index: " + e.target.selectedIndex);         trace("Button properties Object"+e.target.getItemAt(e.target.selectedIndex));         trace("e.responseBtn" + e.responseBtn);
  
           if (e.responseBtn == "Quit")          {             quitApp();            }         else if (e.responseBtn == "Acknowledge")          {             this.dispatchEvent(new Event("startApp"));            }     }
  
         private function quitApp():void       {         stage.nativeWindow.close();       }
  
     }}
  

  My problem is that I can't capture the click event... my tracks in alertButtonClicked never fire... When I click on a modal button disappears... And I get this in the output:

  Response of dialogue show null null
  Receipt of RESPONSE from the server: @control 1
  BaseDialogService.receiveResponse

  Any ideas what's happening here?

  This is a known bug. Please use EVENT. SELECT a workaround until this has been resolved.

• Cannot capture HDV in Windows 7

  I have a new Windows 7 PC (Dell Studio XPS 9000) and have not been able to capture HDV from my Canon Vixia HV30 camcorder.  I could not capture DV no problem when I put the camcorder to downgrade the output using 'DV Lock.  I tried Movie Maker and several other programs with the same result.  Each program recognizes the HV30 correctly.  When I start the capture, the computer manages to control the camcorder and begins to play.  However, HD video capture, usually to create a 0 bit file.

  I tried using different software in compatibility mode of previous versions of Windows and have also tried to use the "legacy" Firewire driver version, but nothing seems to solve the problem.  I don't know exactly what the problem.  I've seen some reviews that mention another card Firewire is required.  I also noticed that the Canon HV30 Windows driver is a "generic A / audio-visual device" driver.  I wonder if there is something that Microsoft needs to get to a specific Canon for Win7 driver.

  For any help or suggestion would be great!

  Hello ej76,

  Thank you for visiting the Microsoft answers Site.

  You can check with the manufacturer of the device camera to a compatible Windows 7 device driver. In addition, you can also try to install the device driver Windows Vista camera in compatibility mode and check the issue.

  To do this, please see the link below:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  In addition, you can check out the link below, provided by the manufacturer of the device to display information about the transfer HDV on your PC by looking for HD transfer in the search box.

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=269&ModelId=16206

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot capture finalization with AV3.0

  I finished capture, but he can't complete with AV3.0.

  Of course, my AVM console is shown green without AppCapture.

  I used administrator privileges and UAC is disabled.

  Any suggestions?

  Thank you.

  ================================= BEGIN LOG ====================================

  AppCapture VMware program

  Version 3.0.0.340 (Agent of Volumes App v3.0.0.0)

  Copyright (c) 2016 VMware, Inc..

  23:23:28 computer:

  23:23:28 date-time:

  23:23:28 command line: AppCapture.exe

  23:23:28 arguments: / n CoreApps-V01

  23:23:28 INFO: processing command line options

  23:23:28 INFO: name of the application: CoreApps-V01

  23:23:28 INFO: drive hard virtual source: C:\Program Files\VMware\AppCapture\templates\wemcapture.vhd

  23:23:28 INFO: attributes of the source disk file: 0 x 00002020

  23:23:28 INFO: vhd attributes to the output folder: 0 x 00002010

  23:23:28 INFO: vhd of output file: C:\ProgramData\VMware\AppCapture\appvhds\CoreApps-V01.vhd

  23:23:28 INFO: copy C:\Program Files\VMware\AppCapture\templates\wemcapture.vhd to C:\ProgramData\VMware\AppCapture\appvhds\CoreApps-V01.vhd

  23:23:32 INFO: prepare the virtual disk to capture output

  23:23:34 INFO: virtual disk for the capture setting

  23:23:36 INFO: waiting for disc fixing

  {23:23:40 WARN: DeviceIoControl() for volume \\?\Volume{b46f65b1-1a0a-11e4-a300-806e6f6e6963} failed (error: 0 x 1)

  23:23:40 INFO: fixing complete disc

  23:25:22 INFO: service installation-start event reported in 101 seconds

  23:25:22 INFO: ready to capture the application installs

  23:25:22 INFO: State registered for the resumption of execution to restart

  23:28:32 INFO: complete installation

  23:28:32 INFO: waiting for svservice to restart

  ================================= BEGIN LOG ====================================

  AppCapture VMware program

  Version 3.0.0.340 (Agent of Volumes App v3.0.0.0)

  Copyright (c) 2016 VMware, Inc..

  23:32:20 computer:

  23:32:20 date-time:

  23:32:20 command line: C:\Program Files\VMware\AppCapture\AppCapture.exe

  23:32:20 arguments: / state: 3 C:\ProgramData\VMware\AppCapture\appvhds\CoreApps-V01.vhd

  23:32:20 INFO: processing command line options

  23:32:20 INFO: / state: 3

  23:32:20 INFO: completion of the capture process: CoreApps - V01.vhd

  23:32:20 INFO: fixing of virtual disk to perform the capture

  23:32:20 INFO: waiting for disc fixing

  23:32:20 INFO: fixing disk full in 0 seconds

  {23: 32: 21 WARN: DeviceIoControl() for volume \\?\Volume{b46f65b1-1a0a-11e4-a300-806e6f6e6963} failed (error: 0 x 1)

  23:32:21 INFO: fixing complete disc

  23:32:52 ERROR: implementation service-successA event not reported after 30 seconds

  23:32:52 ERROR: wait event provisioning-successA no error: [0x0]

  23:32:52 ERROR: failure of program in full mode (error: 0 x 0)

  23:32:52 INFO: cleaning

  ================================== END LOG =====================================

  

  You have to give Internet access to the operating system where the capture is set...

  Why - I don't know

• Sony HVR - Z1U cannot capture - this is because of windows 8?

  I have a brand new Windows 8 machine, core i3, trying to capture video from my Sony HVr - Z1u.

  I installed a new card PCI-Express firewire 1394 a startech.

  With the help of the first Pro CC test.

  iLink downconvert is off. Project is implemented for HDV. Tape recorded in the HDV format, capture the settings for HDV.

  I do most things well because it connects, when I go to capture it says "stopped".

  When I click on save the video begins to play on the camcorder, however the screen on my computer remains blank. Lower-left progressive countdown clock. States to screen captures "capture"Untitled Clip 01.mpeg", press ESC to stop the recording. Capture duration: 00:00:00 (loss 0 images)

  It remains to 00:00:00 time of capture, even while the video plays on the camcorder. While what happens if I go to the tab settings and click 'options' under the control of the device, I get a brief second half or less of the sound on the computer speakers and some video block on the capture screen, then it immediately goes gray and control of device settings window appears. In this window, the parameters are NTSC Sony, Standard. Not matter if I change it for another 1 or 2 another, done the same thing.

  I read the ' can't capture on windows 7 ' of http://forums.adobe.com/thread/521842?tstart=0

  Apparently, they removed the option of former driver under windows 8. See this post: http://www.kvraudio.com/forum/viewtopic.php?p=5346067

  I'm not able at the moment to try this, and I was wondering if anyone else is having a similar experience, or has other suggestions.

  After playing with various drivers and settings without success, apparently the ONLY problem was that instead of simply pressing the record button, I have to press play, then press record. Although when I press the manual it does not play, I still need to press Play first. The record button works as a Play/Pause button if I don't actually rely on the piece. What a waste of time trying to figure that one. Is this a software bug?

• Cannot capture video. Win7-64 bit

  When I try to capture video in first CS5 on Win7 64 bit I get "can't activate recorder." Try to reset the camera. " I have a Panasonic DV1000 deck attached by firewire 400 (Driver Version: 6.1.7600.16385). In Nero, I can control the tape, but no video comes through. If the connection is good.

  A tech note says to change the permisssion to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\1394, but I get "unable to save permsissions" and am logged on as administrator. This is a first time, I try to capture the video on Win7. I also have a problem trying to delete a folder and cannto change permissions.

  I did everything to http://premierepro.wikia.com/wiki/Error:Can % 27t_activate_recorder. Not sure, I ran GSpot v2.7a correctly, says I have 111 codes ready, nothing under clarification solutions.

  These instructions for an older version of first (and Windows). Do this instead:

  • Click Start orb; in the search box, type "device manager", and then select Device Manager (or you like to launch the device in any case manager)
  • Swing open the item of "IEEE 1394 Bus host controllers".
  • Right-click on your listed 1394 controller; Select "Update driver software"
  • Click on the button 'Browse my computer for driver software', then press 'Let Me pick from a list.
  • Select the option that has "(legacy)" at the end of the name; Click next and allow the driver to install
  • Close dialog boxes and try again to capture

• Cannot capture of bridge DVCam Sony DSR-45

  Just loaded CS5 and I get when I try to capture from my terrace DVCam DSR-45. It hangs to the top of the capture window and I have to close the program.  It captures very well from a Sony HVR-M15AU bridge very well.  I'm under company Win764bit on a HP Core 2 duo 3.33ghz with 8 GB of ram.  I really need to get the 45 job as the other module is for a different system.

  Thanks in advance for any help.

  Try this:

  In Windows: Click on start-> Control Panel-> system-> device (to the top top-left) Manager, or simply click on the Start button and the search for "Device Manager."

  Pivoting toward the bottom of the entry for the ' controllers Host Bus IEEE 1394 and do right click on the item that is revealed (depend on the manufacturer of your computer/card).» Select "Update driver software."

  Click on the 'Browse my computer for driver software', and then the "Let me pick from a list" button.

  In the list of drivers, select one that has "(legacy)" at the end; Click Next, and then close all dialog boxes.

  Try to capture again.

• Cannot capture video from the band using CS5

  Just came across a strange problem. Trying to capture a tape DV in a Sony DSR - 11. First CS5 says the tape is in offline mode - I see no video in the capture window and no code of time, although the belt buttons doesn't work. I restarted the computer (Windows 7 platform), powered by the bridge and the and

  disconnected/reconnected the FireWire cable without result.

  I opened my old version 7 of Premiere Pro and capture it works fine. If something is obviously hinky with CS5. Anyone experience this capture

  problem with first CS5? Any ideas for patches?

  Thank you, Steve

  It will have 5 seconds to check capture settings. This is exactly what happens when the Capture parameter format does not match the output. It is also possible to control the device control the bridge, even when output parameters are wrong. There is no interest in doing something else without checking the settiings first.

  I still want to know if this in fact Windows dialog box when the bridge was connected.

• Cannot capture hdv with Premiere Pro

  I'm having a hard time capturing video from my camcorder high definition of Sony HDV - HC7. I am running Premiere Pro CS4 on a DellStudio running under Win 7 64 bit Ultimate system. It has a processor intel i7 CPU (8 cores) with 12 g of RAM.
  
  When I run first and select Capture it opens the capture window properly and allows me to control the camcorder. The camera is connected and working. However, it will not capture. I tried to capture several ways:
  
  1 connect the entry points and on the tape and then do a batch capture.
  2. Enter the whole band.
  3. manually press record at the correct stage is spotted on the camcorder.
  
  Each time the result is the same, nothing is captured. The meter reading displays the band plays and I can see the band playing, but the length of the recorded scene remains at 00:00:00
  
  I am connected via (camera) 4-pin to 6-pin (computer) via firewire. I tried two different firewire cables to ensure that it is not a cable problem. I don't have a capture card dedicated unless my Hauppauge Win TV HVR-1250 can be considered as a capture card. My firewire is out of the system tray, so I did not have a dedicated in system firewire card.
  
  I went through Adobe troubleshooting advice and none of these options helped.

  1. my hardware meets the minimum requirements

  2. recreate (even reinstall) cache does not help.

  3. I have tried two different bands with the same problem

  4. the connection cables work. I even tried two different firewire cables. The two show an iLINK on the camera connection and the capture window can control the playback of the camera without any problems.

  5 scene Detect is grey so I can't turn off, but I don't think it plays a role in the HDV capture.

  6. I checked my device control settings. The unit is set to sony and 1 alternate. I put it this way because I could not capture anything on the standard. I tried this setting and have captured a clip. After that, I could capture is no longer on the new setting. Even though I'm set to Standard or its replacement, the status of the camera is online.

  7 capture with another utility. I tried the software to capture from sony as well as first elements 8.0 and I have the same problems.

  8. make sure that all of the video was made. They are.

  9. Select playback (set to auto) settings.

  10. I'm logged on as an administratore

  11. I don't have a capture card. Do I need one?

  13. I run it with no other current main program execution.

  14. all my drivers are up to date.

  15. my video card driver is current.
  
  I must add that I have the same problem, try other software like Premiere Elements 8.0 and Sony Picture Motion Browser, so I think it's a hardware problem.
  
  I appreciate any suggestions. Do I need a dedicated video capture card? If so, what do you suggest me? Do I need a Firewire 4 pin, rather than a 6 port pins? Do I need a dedicated sony cable as suggested in some forums?
  
  Thanks in advance.
  
  wcameron

  my gut feeling is that the built-in firewire is not good. but before part you with little money for a PCIe version, it is possible, that you can test the device on another computer? just to rule out the camera itself.

  try to avoid really cheap FW cards. I envy those who have a TI chipset, but it's just anecdotal.

  MP

• Cannot capture HDV 1080i in CS3 or CS4

  I just shot a minute of video in HDV 1080i with my new SONY HVR - Z5U camcorder format. I have connected a cable IEEE of the camera on my new computer. Premiere Pro is set to HDV, 1080i formats. In shooting mode, I can control the camcorder but nothing appears on the computer screen and nothing is captured. This worked in DV mode with the recorded DV video, but not to the HDV format. How can I record HDV video in my computer?

  

• Text of the word IDCS4 cannot capture (defining poetry...)

  I see books on poetry and the approval of the withdrawal right a few words.

  Many lines is normal (between the left edge) but others are aligned on the right side.

  This text comes from Word with hyphens but no style is present at all.

  The 'normal' lines show 0 values in the fields (0 left indentation, withdrawal of 1st line o, etc.)

  Special lines are always showing a withdrawal from front-line between 50-70 mm (they change in each poem)

  If I apply a style all the formatting is lost.

  And I can't look at the find/replace indented lines because ALL values change.

  But these special lines are marked in some way. They are the only ones that are indented.

  I want to characterize them.

  Is it possible?

  Hi Mariana (not a not post here before? "I see '1 messages'?)

  Yes, it's a common problem. You want to apply your styles, but you can't because it would remove the formatting that you want to keep. Generally, concerning than fat, italic and similar, but every now and then something else pops up.

  You want to apply the same style to each of these lines and with just the preserved dash? I'm thinking "script opportunity" here.

  There are, it seems, two ways to handle this with a script. The simplest is to 'save' the indent, apply the correct style, then put the value of back withdrawal - what makes a style "Style +»

  Another way is to make a new style for each line, "based on" the right style, but with the dash on the right values for this line.

  (And I should probably tell you right away that the disadvantage is that it might make a lot of new styles...)

• I cannot "capture" view state full screen

  Hello

  When you try to get my head around another problem I have with edit content accordingly if the displayState is normal or full-screen, I tried to put in place a feedback/debugging box that sent me messages on the displayState. I've created a text with dynamic text box and gives it a variable name, and then wrote a little tidbit AS2 as follows:

  If (Stage ["displayState"] = "normal") {}
  TextBox = ("you're in normal mode");
  } else {}
  TextBox = ("you're using the full screen");
  }

  When I start the movie and I am in normal mode and then I get the correct message but when I hit a button to toggle true full screen on and then the normal message stays on the screen.

  Of course, I'm new to all of this, what I am doing wrong?

  Thank you!

  These are the ".text" property not '.txt '. Hmm, you say it is a textfield variable and it works without putting .text? Is not supposed to work, it's totally weird. But in any case, it works for you I guess. Flash runs the script of a frame as his head enters the frame. But if there is only 1 frame so it won't 'move' to himself again, so it will not run the code again. If you want to periodically run a script with a speed of 1/FRAMERATE seconds or the time it jumps from image to image, then you can use the function onEnterFrame like this:

  this.onEnterFrame = function()

  {

  trace ("run this statement periodically");

  }

  For the execution of the code, place it inside the function after the statement that tells flash player to access the mode full screen.